Fully Automatic Whole House Backwash Sediment Filter, Well Water Filtration System for Sand, Rust and Impurity Removal

Product Introduction

The BRISKSPRING Fully Automatic Whole House Water Prefilter is an advanced self-cleaning filtration system designed to protect household and commercial water systems from sediment, rust, sand, dirt, and suspended particles.

As the first filtration barrier installed at the main water inlet, it effectively removes impurities before they enter household pipelines, helping protect faucets, showers, water heaters, washing machines, dishwashers, and other water appliances from sediment buildup and blockage.

Equipped with 40μm precision filtration technology, automatic backwashing system, and dual-sided scraping cleaning structure, the SQ550B-BS automatically removes accumulated impurities without manual cleaning. The intelligent self-cleaning design helps maintain stable filtration performance while reducing maintenance frequency and operating costs.

Built with food-grade SUS 316L stainless steel filter mesh and an H59-1 international standard copper body, this prefilter provides excellent durability, corrosion resistance, and long-term reliability under various water conditions.

Product Parameters

Product Advantages

1. Automatic Self-Cleaning Backwash Technology

The integrated automatic backwashing system automatically cleans the filter mesh when sediment accumulates.

Through reverse water flow, trapped impurities are effectively removed from the filter surface, restoring filtration efficiency without manual disassembly or cleaning.

Benefits:

• No frequent manual maintenance
• Stable filtration performance
• Reduced cleaning workload
• Extended filter service life

2. Whole House Water Protection

Installed at the main water inlet, the prefilter provides comprehensive protection for the entire household water system.

It helps prevent sediment accumulation in:

• Faucets
• Shower systems
• Water heaters
• Washing machines
• Dishwashers
• Household pipelines

Protecting downstream equipment and extending service life.

3. Efficient Sediment, Rust & Particle Removal

The 40μm precision SUS 316L stainless steel filter mesh efficiently captures:

• Sand particles
• Rust flakes
• Dirt
• Silt
• Suspended solids

Helping improve water clarity while reducing contamination risks inside household plumbing systems.

4. Stable High Flow Performance

The optimized internal filtration structure ensures efficient impurity removal while maintaining low pressure loss.

With a flow rate of up to 6 tons per hour (6T/H), the system supports multiple water outlets operating simultaneously while maintaining stable water pressure.

5. Water-Powered Operation, No Electricity Required

The automatic flushing system operates through water pressure without requiring electrical connection.

Advantages include:

• Energy saving
• Reliable operation
• Easy installation
• Lower operating cost

Making it suitable for both residential and commercial applications.

6. Durable Corrosion-Resistant Construction

The filter combines:

• Food-grade SUS 316L stainless steel filter mesh
• H59-1 international standard copper body

Providing:

• Excellent corrosion resistance
• High mechanical strength
• Long-term durability
• Reliable sealing performance

Suitable for different water environments.

7. Low Maintenance & Cost-Saving Design

The automatic self-cleaning structure reduces the need for manual cleaning and frequent filter replacement.

It helps:

• Lower maintenance costs
• Reduce downtime
• Improve filtration efficiency
• Extend product lifespan

Working Principle

1. Water Inlet

Household water enters the water Pre-filter through the main water supply pipe.

The prefilter acts as the first protection stage before water enters the entire household system.

2. Precision Filtration Process

Water passes through the 40μm SUS 316L stainless steel filter mesh.

The fine filtration structure captures sediment, rust, sand, and suspended particles while allowing clean water to continue flowing through the system.

3. Impurity Accumulation Detection

During operation, filtered impurities gradually accumulate on the filter mesh.

When cleaning is required, the automatic backwash system activates according to the preset cleaning cycle.

4. Automatic Backwashing Process

During backwashing, water flow direction is reversed.

The reverse water pressure washes away trapped contaminants from the filter mesh, while the internal scraping structure helps remove stubborn particles attached to the surface.

5. Drainage & Recovery

The removed impurities are discharged through the flushing outlet.

After cleaning, the system automatically returns to normal filtration mode, maintaining continuous protection without replacing filter components.

Why Choose BRISKSPRING Automatic Water Prefilter?

✅ Intelligent Automatic Self-Cleaning

Automatic backwashing eliminates frequent manual cleaning and ensures consistent filtration performance.

✅ Protects the Entire Water System

One installation at the main inlet protects all household pipelines, faucets, showers, and water appliances.

✅ High-Efficiency Sediment Filtration

40μm precision filtration effectively removes rust, sand, and suspended particles.

✅ No Electricity Required

Water-powered operation provides an energy-saving and reliable filtration solution.

✅ Durable Materials & Long Service Life

Premium SUS 316L stainless steel and copper construction ensure stable performance for years.

✅ Low Maintenance Solution

Automatic flushing reduces maintenance frequency and lowers long-term operating costs.

✅ Suitable for Multiple Applications

Ideal for:

• Houses
• Apartments
• Villas
• Hotels
• Commercial buildings

Providing professional whole-house water protection.

Key Points

Automatic Backwash Cleaning | 40μm Precision Filtration | SUS 316L Filter Mesh | 6T/H High Flow Rate | Sediment Rust Sand Removal | No Electricity Required | Whole House Protection | Low Maintenance | Long Service Life

Recommended Combination with Water Descaler

For complete whole-house water protection, we recommend combining the BriskSpring Stacked Disc Spin Down Sediment Filter with a Physical Water Descaler.

The Water Descaler provides the second protection stage by:

• Reducing limescale formation
• Preventing scale adhesion
• Protecting pipes and heating equipment

Together, they create a better whole-house water treatment solution.

FAQ

• Q1: Are you a manufacturer?

  A: Yes. We are a leading water filtration manufacturer in China, recognized as an industry benchmark enterprise and a standards drafting unit. We have developed multiple generations of water filtration technologies and a full range of product series.

• Q2: Can we use our logo/brand?

  A: Yes. We provide OEM and ODM services and have long-term partnerships with globally recognized brands such as iSpring, and other leading international companies.

• Q3: Can you provide samples for quality testing?

  A: Yes. Samples are available, and we offer them at preferential pricing for evaluation purposes.

• Q4: What is the delivery time for orders?

  A: We have a monthly production capacity of up to 100,000 units. Lead time depends on order quantity, model selection, and packaging requirements, typically ranging from 7 to 35 days.

• Q5: Why should I choose BRISKSPRING?

  We operate a fully integrated production chain covering industrial design, mold development, plastic injection, and copper component manufacturing. All core parts are produced in-house, ensuring stable quality and cost efficiency.

  Most of our products are certified to international standards, including NSF, SGS, and RoHS.

Let's Work Together

Contact Cynthia for samples or custom proposals:

Our factory produces 150,000 units monthly, with a 30-35 working days delivery time. Certified by NSF SGS and trusted in over 30 countries.