Product Specification

What Is a Prefabricated Steel Structure Building?

A prefabricated steel structure building is a bolt-together steel frame system in which every column, rafter, purlin, and connection plate is precision-cut, drilled, and welded in our factory — then containerized and shipped to your site for rapid assembly.

Unlike traditional on-site steel fabrication (which is slow, weather-dependent, and expensive in most countries), our approach delivers:

· 30–50% faster construction compared to conventional steel erection

· Zero on-site welding — 100% bolted connections

· Lower total project cost through factory efficiency and reduced site labor

· Consistent quality — every component passes dimensional inspection before packing

This is not a "steel kit." This is a fully engineered structure, designed to your local wind, snow, and seismic loads.

Custom Engineering for Your Climate

· Not all steel buildings are the same. We design to your actual environmental loads:

5. Corrosion Protection That Lasts

· Steel only lasts if it's protected. Our standard finish is hot-dip galvanizing to ≥ 85μm zinc thickness, tested to ISO 1461. For coastal or aggressive environments, we offer:

         · Heavy galvanizing (≥ 140μm)

         · Duplex system: galvanizing + epoxy primer + polyurethane topcoat

         · Stainless steel fasteners (A2-70 / A4-80 grade) for critical connections

         · Corten (weathering) steel upon request

Case 3 | 250 ㎡ Maple Syrup Evaporating Facility, Eastern Townships, Quebec

Project Location: Eastern Townships, Quebec Building Type: Maple‑syrup processing workshop (Sugar Shack) Floor Area: 250 ㎡ (10 m × 25 m) Eave Height: 3.5 m (single‑floor main space), with a partial 6 m × 6 m mezzanine Delivery Schedule: 20‑day design + 30‑day production + 25‑day land transportation & erection

Project Background

The client is a family‑owned maple‑sugar farm in Quebec. Its original wooden Sugar Shack had been in service for 40 years and required reconstruction into a modern processing facility complying with food‑sanitation standards set by MAPAQ (Ministère de l’Agriculture, des Pêcheries et de l’Alimentation du Québec). The building is designed for year‑round operation: syrup boiling in spring, equipment storage in summer and autumn, and standby thermal retention in winter.

Technical Solution

• Non‑portal steel frame structure with 5.0 m × 5.0 m column grid to accommodate mezzanine layout.
• Roof: 150 mm rock‑wool sandwich panels, meeting Quebec energy‑code insulation requirements with an equivalent R‑value ≥ R‑40.
• Walls: 100 mm rock‑wool sandwich panels; food‑grade stainless‑steel cladding for interior walls in the boiling zone.
• Windows: high‑level windows on the south elevation and low‑level windows on the north elevation, creating natural steam exhaust ventilation via temperature difference.
• Steam ventilation: six motor‑operated smoke‑vent skylights fitted with bird‑proof mesh installed along the roof ridge, fully opened during the syrup‑boiling season.
• Floor: anti‑slip epoxy coating, central drainage channel and stainless‑steel floor drains.
• Additional snow‑load design: 3.6 kPa for Quebec region (Ss=3.0, Sr=0.6).

Project Highlights

During MAPAQ acceptance for food‑processing facilities, connection details between stainless‑steel cladding and steel structure passed high‑pressure cleaning‑and‑sanitization rinse tests. This building has become a reference model recommended by the local maple‑syrup association for new farming operators.

Why Our Clients Choose Us

         · "Your technical team provided a full EN 1090-2 EXC3 package that our structural engineer described as 'more complete than some European fabricators.'"

        — Technical Director, MRO Aviation, United Kingdom

Frequently Asked Questions

· Can you handle the structural design and calculations?

· Yes. Our in-house engineering team produces a complete structural package — frame analysis, connection design, foundation reaction tables, and anchor bolt layouts — referenced to your local building code. We can also coordinate with your local engineer of record for plan review and permit submission.

· How is the steel packed and shipped?

· All components are bundled, labeled, and containerized with a detailed packing list keyed to the erection drawings. Bolts and small accessories are packed in clearly marked plywood crates. We use export-grade fumigated timber dunnage and VCI (volatile corrosion inhibitor) wrapping for ocean freight.