Seamless Alloy Pipe Concertrice Reducer SCH40 ANSI B16.9

Product Specification

Alloy Pipe Fittings Concertrice Reducer 3X4inch SCH40 ANSI B 16.9 High Thermal Stability
 
Specifications
 
1. Butt weld fittings
2. sch5s-schxxs
3. ISO9001,ISO9000
4. Market:America,Africa,Middle East,Southeast of Asia

 
Eccentric / Concentric Reducer Fitting
 
There are two options available, of Concentric Reducer or Eccentric Reducer.
An Eccentric Reducer, also called a Bell reducer, has two female (inside) threads of different sizes with centers so designed that when they are joined, the two pieces of pipe are not in line with each other, but they can be installed so as to provide optimum drainage of the line.
The fitting is designed with the smaller outlet off center to the larger end, allowing it to align with only one side of the inlet. The reducer fittings are designed to be welded with ease and offer superior strength and leak resistance.
Eccentric Reducer must be installed with straight side up to prevent trapping air at the pump suction. They are designed to allow simple connection of different sized pipes. These can be used as pipe reducers, flexible connectors and vibration eliminators.
Eccentric Reducers eliminate noise and isolate vibration in the pipeline, reduces stress, eliminates electrolysis and protects against start-up surges.
A Concentric Reducer joins the tube sections on the same axis. They connect unequal size pipes that have a common centerline and are used for TC transitions in vertical tubing.
A Concentric Reducer has different size ends to mate hose or tubing of different diameter that joins tube sections on the same axis. Since virtually all piping systems go through changes in diameter either in the run or at the equipment connections, a reducer serves the dual purpose of changing the piping diameter and at the same time that of handling the expansion, misalignment or vibration problem.
While there are published transition sizes and face to face dimensions, it is seldom that the cataloged sizes refer to what is required on the jobsite. Hence, the face to face dimensions as well as the two flange sizes are varied to fit the application. Thus, Custom reducers are easily manufactured as per the specifications.
 
Chemical Composition
Nickel (plus cobalt) ......................................................99.0 min.
Copper........................................................................0.25 max.
Iron..............................................................................0.40 max.
Manganese .................................................................0.35 max.
Carbon........................................................................0.15 max.
Silicon .........................................................................0.35 max.
Sulfur ..........................................................................0.01 max
 
Our Service
 
Why Choosing Metal Industrial:
 
-Sufficient Forging, Heating, Machining Equipment
-In-house Inspection Instruments for Quality Controlling
-Competitive Price & High Quality Assurance
-Fast, Effective and Efficient Services
-Directly supplier of Danieli Metallurgical Equipment
-Experienced Professinonals on Communications
 

STANDARDS:

ASTM B366 - ASME SB366 - Factory-Made Wrought Nickel and Nickel Alloy Fittings

ASTM A815-Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

ASTM A403-Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASTM A234-Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

ASTM A420-Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

ASME B16.28 - Wrought Steel Buttwelding Short Radius Elbows and Returns 　 　 　

ASME B16.25 - Buttwelding Ends

MSS SP-43 - Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications