RG195A/U 95 Ohm High Voltage RF Cable MIL-DTL-17 Coaxial Cable for Satellite and

RG195A/U M17/137-00001 is a MIL-DTL-17 compliant 95 Ohm coaxial cable engineered for applications requiring high voltage resistance and precise impedance matching. This RF cable features a white taped PTFE jacket that enables continuous operation from -55°C to +250°C while maintaining flexibility for routing in confined spaces. The 0.30mm silver-plated copper-clad soft steel (SCCS) inner conductor provides reliable signal transmission with the mechanical strength needed for fixed installations. The extruded PTFE dielectric at 2.60mm ensures consistent 95 Ohm impedance with 51 pF/m capacitance and 69.5% velocity of propagation. The silver-plated copper wire braid at 2.97mm delivers effective EMI shielding with excellent conductivity. With 1500V RMS maximum operating voltage and 400 MHz rated frequency, RG195A/U is suited for aerospace avionics, defense systems, and high-voltage industrial applications requiring 95 Ohm characteristic impedance.

• White taped PTFE jacket – wrapped construction provides 250°C continuous temperature rating, exceeding FEP jacketed alternatives by 50°C
• 95 Ohm precision impedance – optimized for specialized RF and data transmission applications requiring 95 Ohm characteristic impedance
• 1500V operating voltage – higher voltage rating than standard 50-75 Ohm high power coax, suitable for demanding defense and aerospace requirements
• 0.30mm silver-plated copper-clad soft steel conductor – SCCS construction combines conductivity with mechanical strength for reliable fixed installations
• Extruded PTFE dielectric at 2.60mm – precision extruded PTFE ensures consistent 95 Ohm impedance and low signal loss
• Silver-plated copper wire braid – 2.97mm outer conductor provides effective EMI/RFI protection with excellent conductivity
• 51 pF/m capacitance – optimized for signal transmission with 69.5% velocity of propagation
• 400 MHz operating frequency – suitable for video, data, and RF applications within the specified range
• MIL-DTL-17 compliant – M17/137-00001 for mission-critical defense and aerospace applications requiring full traceability
• 3.68mm overall diameter – compact form factor fits through tight cable channels in crowded avionics bays
• 17.8mm minimum bend radius – enables complex routing paths while maintaining electrical performance
• 28.7 g/m lightweight construction – suitable for weight-sensitive aerospace applications

• Ground-based defense radar systems – 95 Ohm impedance appears in certain radar receiver and signal processing chains where characteristic impedance differs from standard 50 Ohm; 1500V rating provides margin for radar transmitter coupling circuits
• Shipboard electronics suites – Naval vessels specify 95 Ohm for internal RF distribution in communication and navigation systems; taped PTFE jacket withstands salt spray and humidity
• Industrial high-voltage sensing – Sensors operating at elevated voltages benefit from 1500V withstand; 250°C rating suits furnace-adjacent monitoring in steel and glass manufacturing
• Defence depot maintenance – Replacement cabling for vintage radar and communication equipment originally designed with 95 Ohm interfaces; MIL-DTL-17 qualification ensures form-fit-function replacement
• Specialized test equipment – RF test sets and signal generators with 95 Ohm ports for compatibility with legacy defense systems; 51 pF/m capacitance maintains signal integrity
• High-temperature data acquisition – Fixed installations in turbine test cells and engine test stands where ambient temperatures reach 250°C
• Ammunition plant instrumentation – 1500V rating provides isolation for sensors in electrically noisy environments with transient voltages

Q: Why 95 Ohm instead of 50 or 75 Ohm?
A: Certain defense radar systems, shipboard electronics, and specialized industrial equipment were designed with 95 Ohm characteristic impedance. RG195A/U serves as direct replacement for these applications.

Q: What is the M17 part number for RG195A/U?
A: M17/137-00001 is the official MIL-DTL-17 designation.

Q: What is the temperature rating?
A: -55°C to +250°C continuous, enabled by taped PTFE jacket construction.

Q: What is the voltage rating?
A: 1500V RMS, higher than many high voltage coax cables.

Q: What is the capacitance?
A: 51 pF/m, with 69.5% velocity of propagation.

Q: What type of conductor?
A: 0.30mm silver-plated copper-clad soft steel (SCCS).

Q: What is the outer diameter for RG195A/U?
A: 3.68mm including taped PTFE jacket.

Q: What is the bend radius?
A: 17.8mm minimum for static installation.

Q: What connectors work with RG195A/U?
A: Connectors designed for 95 Ohm cables with 3.7mm diameter. Verify compatibility with your equipment's connector type.

Q: Do you offer custom lengths?
A: Yes, available in OEM and ODM, bulk spools, cut pieces, or terminated assemblies.