| Resolution | 1024x600 |
| Brightness | 1000 cd/m2 typical |
| Logic Supply | 3.3 V |
| Display Size | 7 inch |
| Interface | 24 bit RGB, 50 pins |
| Delivery Time | 25 days (up to 10 pieces) |
| Operating Temperature | -30C to +85C |
| Place of Origin | China |
View Detail Information
Explore similar products
10.1 Inch In-Cell Capacitive Touch TFT LCD Display with 1200x1920 Resolution and
10.1 Inch TFT LCD Display with 1200x1920 Resolution, MIPI DSI Interface and In
10.1 Inch Portrait TFT LCD Module with 1200x1920 Resolution and MIPI DSI 40-Pin
15.6 inch FHD 16:9 TFT LCD Display with LED Backlight and Driving Circuit Design
Product Specification
| Resolution | 1024x600 | Brightness | 1000 cd/m2 typical |
| Logic Supply | 3.3 V | Display Size | 7 inch |
| Interface | 24 bit RGB, 50 pins | Delivery Time | 25 days (up to 10 pieces) |
| Operating Temperature | -30C to +85C | Place of Origin | China |
| High Light | 7-Inch TFT LCD ,1024x600 TFT Display Module ,1000 Nits TFT LCD Panel | ||
Operating temperature and storage temperature are both specified as -30°C to +85°C. The reliability list includes high temperature operating at 85°C ± 2°C for 240 hours, low temperature operating at -30°C ± 2°C for 240 hours, and the same 240-hour storage tests at both ends. That is the evidence behind the wide temperature industrial control positioning; send your cabinet ambient profile and duty cycle for an evaluation against the specification.
The vibration test condition is 10 Hz ~ 55 Hz ~ 10 Hz with 1.5 mm amplitude, applied in the X, Y and Z directions for 3 hours in total. The dropping test is a 1 m carton drop on every side of the carton. Mounting design is still the customer's responsibility, so share the mounting detail and the measured vibration level at the panel position for review.
The panel itself is specified for -30°C to +85°C operating with no separate panel heater or fan stated in the specification. Whether the enclosure needs thermal management depends on the whole system power budget, so send the enclosure thermal design to the technical team and the panel is evaluated against the specified temperature range.
Brightness is 1000 cd/m² typical at If = 300 mA with a contrast ratio of 1000:1 typical and 800:1 minimum. The full viewing angle is 80° typical in all four directions (3:00 / 6:00 / 9:00 / 12:00). That combination keeps control views readable in a lit hall and in an outdoor cabinet that sees direct light on the front cover.
The interface is 24-bit RGB on 50 pins with logic supply 3.3 V, and the controller is ILI5120T / ILI6150M6T. The backlight is driven at Vf 9.0 V typical and If 300 mA typical (2.7 W typical). The 50-pin interface definition table is supplied so the hardware team can verify the RGB timing before release.
Price is USD 13.8 per piece with MOQ 5000 pcs for this configuration. Volume, annual schedule and any customization request are reviewed together so that the quotation and the delivery schedule match the project.
Outgoing inspection uses MIL-STD-105E, normal inspection, single sampling, Level II, with major defect AQL 0.65 and minor defect AQL 1.5. Visual inspection runs at 25°C ± 5°C, 65% ± 5% RH, 800 ~ 1000 Lux and 35 ± 5 cm viewing distance, so acceptance criteria are fixed before the order is placed.
Sample units are available for evaluation together with the 50-pin interface definition table, the optical and backlight data and the mechanical drawing, so the hardware team can check the 24-bit RGB timing, the 3.3 V logic supply and the 5.60 mm outline against the cabinet design before release. Weight and panel power consumption are TBD in the specification; the RoHS marking on the outline drawing is the only certification declared in the document.
Established in 2019, Shanghai Best Display Electronic Technology Co., Ltd. is a Shanghai-based manufacturer of electronic display components and modules, with production running since 2012. The company produces MONO LCD glass and LCM modules, TFT display modules with or without touch, PMOLED and AMOLED modules, mirror LCD, LCD shutter, touch panels and industrial HMI products.
Its TFT facility covers 3,100 square meters and supports approximately 1,000,000 modules monthly, while its MONO LCD operation supports approximately 1,300,000 LCM pieces monthly. The company employs 101–200 people and serves Western Europe, Eastern Asia, North America, Central America and the Middle East. Quality systems include ISO9001 and ISO14001, with incoming AQL 0.25 and outgoing AQL 0.65 inspection.
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2012
Total Annual:
1000000-5000000
Employee Number:
100~200
Ecer Certification:
Verified Supplier
Shanghai Best Display Electronic Technology Co., Ltd. was founded in 2012. It is a high-tech enterprise integrating R&D, design, production and sales of TFT LCD modules (LCM), OLED display modules, and industrial-grade HMI hardware and software. We are committed to providing global customers w... Shanghai Best Display Electronic Technology Co., Ltd. was founded in 2012. It is a high-tech enterprise integrating R&D, design, production and sales of TFT LCD modules (LCM), OLED display modules, and industrial-grade HMI hardware and software. We are committed to providing global customers w...
Get in touch with us
Leave a Message, we will call you back quickly!