Product Specification

0.8-5.4T Manual Tirfor Cable Puller Winch with 20m Wire Rope

Product Overview

The Manual Tirfor Cable Puller Winch is a portable wire rope pulling tool designed for cable installation, power line construction, equipment positioning, lifting and tensioning applications.

Available in rated capacities from 0.8 ton to 5.4 tons, the hand hoist is supplied with a standard 20-meter steel wire rope, safety hook and extendable operating lever.

Unlike a traditional drum winch, the wire rope passes continuously through the internal gripping mechanism. This design provides flexible pulling distance and makes the tool suitable for long-distance cable pulling and field construction.

The Challenge on Cable Pulling Sites

Cable installation and line construction projects are often carried out in locations where:

• Electrical power is unavailable
• Large pulling equipment cannot enter the site
• Working space is limited
• Loads must be moved or tensioned precisely
• Portable equipment is required for frequent relocation

Electric or engine-driven winches may be too large or inconvenient for these working conditions.

Our Manual Cable Pulling Solution

This manual Tirfor wire rope hoist provides controlled pulling force without electricity, batteries or fuel.

The compact hand-operated design allows workers to pull, lift, lower or position loads in remote areas, construction sites, substations, factories and overhead transmission line projects.

Product Definition

A Tirfor cable puller is a manual wire rope hoist that uses an internal jaw-gripping mechanism to move a steel wire rope through the machine.

By operating the telescopic handle, the user can move the wire rope forward or backward in controlled steps. Because the rope is not stored on a drum, longer wire ropes can also be used when required.

Key Features

Multiple Load Capacities

Four rated capacities are available:

• 0.8 ton
• 1.6 ton
• 3.2 tons
• 5.4 tons

Customers can select the appropriate model according to the required pulling force and working conditions.

Standard 20m Wire Rope

Each unit is supplied with a 20-meter steel wire rope. Customized rope lengths can be provided for long-distance pulling applications.

Manual Operation

The cable puller requires no electricity, hydraulic power or fuel, making it suitable for remote and temporary construction sites.

Continuous Wire Rope Travel

The wire rope passes directly through the gripping mechanism instead of being wound onto a drum. This allows flexible working length and reduces rope-capacity limitations.

Controlled Forward and Reverse Movement

Separate operating controls provide controlled pulling, lifting, lowering and load-positioning functions.

Portable Construction

The compact body and detachable operating lever make the tool easier to transport, store and operate in confined spaces.

Safety Hook

The supplied steel wire rope is fitted with a load hook and safety latch to reduce the risk of accidental disengagement.

Technical Specifications

Available Models

How It Works

1. Secure the Tirfor hoist to a suitable anchoring point.
2. Insert the steel wire rope through the internal gripping mechanism.
3. Connect the wire rope hook to the cable, equipment or load.
4. Install the extendable operating lever.
5. Operate the forward lever to pull or lift the load.
6. Use the reverse control to lower or release the load gradually.

The anchoring point, hook and wire rope must be checked before every operation.

Main Advantages

• No external power source required
• Portable and easy to relocate
• Suitable for remote construction sites
• Controlled load movement
• Flexible wire rope working length
• Multiple load capacities available
• Simple operation and maintenance
• Suitable for both horizontal pulling and approved vertical lifting
• Customized wire rope lengths available

Application Areas

The manual wire rope puller can be used for:

• Overhead transmission line construction
• Underground cable installation
• Conductor and wire tensioning
• Power cable pulling
• Substation construction
• Utility pole installation
• Industrial equipment positioning
• Machinery installation and maintenance
• Pipeline construction
• Bridge and steel structure installation
• Forestry and agricultural pulling work
• Emergency recovery and field rescue

How to Select the Correct Model

The required model should be selected according to the actual pulling resistance, load weight, working direction and required safety factor.

• Choose 0.8T for light installation and maintenance work.
• Choose 1.6T for general cable pulling and utility construction.
• Choose 3.2T for heavy cable, conductor or equipment pulling.
• Choose 5.4T for heavy-duty industrial applications.

The selected rated capacity should be higher than the calculated maximum working load. It must not be used for lifting personnel.

Optional Configurations

• Customized steel wire rope length
• Additional wire rope
• Different hook configurations
• Spare operating lever
• Export wooden case
• Customized product label
• OEM branding and packaging

Why Choose Us

CHANGSHU XINYA MACHINERY MFG. CO., LTD. specializes in cable pulling tools, transmission line stringing equipment and power construction machinery.

We can provide complete cable installation solutions, including:

• Manual Tirfor wire rope hoists
• Cable pulling winches
• Cable conveyors
• Cable rollers
• Stringing blocks
• Cable drum stands
• Wire grips
• Anti-twisting wire ropes
• Hydraulic pulling and tensioning equipment

Frequently Asked Questions

1. Is the 20-meter wire rope included?

Yes. The standard package includes one 20-meter steel wire rope with a safety hook.

2. Can you provide a longer wire rope?

Yes. Customized wire rope lengths can be supplied according to the required pulling distance.

3. Does the cable puller require electricity?

No. It is operated manually through the extendable lever and requires no electricity, fuel or battery.

4. Can it be used for both pulling and lifting?

It is designed for pulling, tensioning, positioning and approved lifting applications. The correct model and safety factor must be selected according to the actual load.

5. Which capacities are available?

The available rated capacities are 0.8T, 1.6T, 3.2T and 5.4T.

6. What is included in the standard package?

The standard package includes the Tirfor hoist body, 20-meter steel wire rope, safety hook and operating lever.

7. Can you provide OEM service?

Yes. Product labels, packaging, wire rope lengths and other configurations can be customized.

Request a Quotation

Please provide the following information:

• Required pulling capacity
• Required wire rope length
• Order quantity
• Application
• Destination country or port

We will recommend the correct model and provide the technical specification, packing details, delivery time and quotation.

Detailed Images

Parameters