Xianxian Zhongtu Hardware Tools Co.,LTD
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 30000pcs/month |
| Delivery Time | 10-15days |
| Packaging Details | carton |
| product name | 3tons Low Level Transmission Jack |
| highest height | 950mm |
| the minimum height | 145mm |
| the rated load | <=3ton |
| the weight | 105kgs |
| color | customized |
| Brand Name | zhongtu |
| Certification | CE |
| Place of Origin | china |
View Detail Information
Explore similar products
Iron Hydraulic Telescopic Transmission Jack , 0.5T Transmission High Lift Jack
Foot Operated Car Lift Transmission Jack , Single Pump 1000 Lb Transmission Jack
1760mm Car Lift Transmission Jack , 2T Low Transmission Jack
Steel Safety Bracket Car Lift Transmission Jack CE Approved
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 30000pcs/month |
| Delivery Time | 10-15days | Packaging Details | carton |
| product name | 3tons Low Level Transmission Jack | highest height | 950mm |
| the minimum height | 145mm | the rated load | <=3ton |
| the weight | 105kgs | color | customized |
| Brand Name | zhongtu | Certification | CE |
| Place of Origin | china | ||
| High Light | 3tons car lift transmission jack ，0.95m car lift transmission jack ，CE 3 ton transmission jack | ||
3tons Low Level Transmission Jack
First, the basic function
The hydraulic lift conveyor is the introduction of foreign prototype, combined with the domestic automobile repair and maintenance industry requirements and characteristics of careful design.It is mainly used for the high installation and disassembly of automobile gearbox, engine, transmission motor, front and rear axle and other objects whose weight does not exceed 2T. It is an indispensable lifting and transporting tool for automobile repair and maintenance factory. It is the supporting equipment of column or shear type automobile lifting equipment.
Two, use method
1, with the pillar or scissor lift to lift the car to a certain height.
2, Push the hydraulic lift under the car, and lift the hydraulic lift to the appropriate position, and remove the objects to be repaired (such as:Gearbox, engine, drive shaft, front and rear axle, etc.) are placed in the center of the bracket, and then the object is fastened with steel chain, and the unloading valve is opened.Put what the bracket and objects.
3, Push the hydraulic lift to the desired position.Under the object with the crane maintenance.
4, After the object is repaired, lift the object with the crane and put it in the center of the bracket, and fasten the object with the steel chain.Ship lifter driven fluid pressure in appropriate places under the car
5, close the unloading valve, step on the oil pump, lift the object to the appropriate position, install the object, such as the object position is not right, you can move the hydraulic lift or through the adjusting hand wheel under the bracket to adjust.
| the highest height | 950mm |
| the minimum height | 145mm |
| the rated load | <=2ton |
| the weight | 105kgs |
What do you do?
Our products mainly include electric oil, gear oil pump series, spanner, tow rope, high pressure gas cylinder, high and low position conveyor, pneumatic oil injector injector.
Do we accept customization?
Yes, we can accept customization.
Can you help us to do some change about your product?
Yes, special drawing and design will be evaluated by our technical department, unit cost will be calculated by finance department for your final confirmation. All procedures will be informed and confirmed with you in advance.
Can I get a sample?
Yes. Samples are welcome to us before mass production. But few extra cost and products cost will be charge from customer first, and sample cost will be back to customer once started mass production.You need to pay the express fee.
Are you a factory or trading company?
xianxian zhongtuo hardware tools co.,LTD is specialized in the production and development of automobile repair tools,equipment and sales as one of professional manufacturers.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Seller
Total Annual:
3000000-7000000
Employee Number:
100~120
Ecer Certification：
Active Member
Xianxian Zhongtu Hardware Tools Co.,LTD is a professional manufactured integrating research, development, production and sales. The technical management team led by senior technicians has the strength of developing new products and new technologies by itself, and the company strictly strength-ens th... Xianxian Zhongtu Hardware Tools Co.,LTD is a professional manufactured integrating research, development, production and sales. The technical management team led by senior technicians has the strength of developing new products and new technologies by itself, and the company strictly strength-ens th...
Get in touch with us
Leave a Message, we will call you back quickly!