High Flexibility 3K Woven Roll Wrapped Carbon Fiber Tube With Good Durability

Product Specification

High Performance Flexibility Roll Wrapped Carbon Fiber Tube with Good Durability

Composites materials such as phenolic and others are typically manufactured from a combination of take two or more constituent materials which are usually laminated and bound together with a high-strength resin binder. The substrates are either a paper-based, or fiber-based materials such as woven fiber cloth. When heat and pressure is applied to the substrates, they fuse together to produce a strong laminate or composite material with superior mechanical and electrical properties. We offer both the finished composites, as well as, the materials and supplied used to produce composites.

Carbon fiber rods and tubes are manufactured by pulling or wrapping carbon fibers and epoxy resin to a desired diameter/cross-section to form a densely reinforced carbon composite. Great selection of Rectangular and Round Carbon Fiber Rods.

A roll-wrapped carbon tube is manufactured by wrapping unidirectional carbon fiber prepreg tape around a mandrel with the majority, but not all, of the carbon fiber running longitudinally. This type of construction offers a higher strength-to-weight ratio than is available in pultruded tubes. Typically used where thin-walled, lightweight tubes are required to provide additional torsional stiffness and high strength.

This item is suitable for making:
Helicopter tail booms, Push rods, Wing blade spars, Wing joiner rods

​Processes of rolling wrapped Carbon fiber tubing poles:

- Drawing of prepreg Carbon fabric
- Design;
- Tools manufacture;
- Mandrel wrapping (male molding);
- Female molding;
- Wet laminate;
- Vacuum Infusion;
- Oven and autoclave curing;
- Complete fit-out, painting, and finishing of products;
- CNC machined or milling, including aluminum molds, etc...

Applications:

1. Automobiles, body, parts, inside decoration, etc;
2. Bike Motorcycle, body, and parts;
3. Aerospace and navigation, plane, barge, freighter, boat, ship, vessel;
4. Sports and entertainment, golf, ski pole, hockey pole, badminton pole;
5. Hunting bow and arrows archery stabilizer tennis pole, snooker pole, trekking pole ski pole;
6. Billiards cues protecting equipment etc;
7. RC hobby, UAV Drone, Copter, FPV frame parts, Tools, model;
8. Construction and Bridge reinforcement and strengthening;
9. Energy, wind turbine blades, oil driller, etc;
10. Telescopic tubes/poles;
11. Music equipment, Camera support tripod pole;
12. Mobile or Jewelry electronic production decoration;
13. Medical X-ray machine Carbon devices, toys, telescopic tube;
14. Industrial mechanical parts sports products parts;

Advantages of our carbon fiber tubes:

With more than 10 years' experience, we are very professional in making carbon fiber tubes. We use Toray carbon fiber as raw material. As you know, LIJIN carbon fiber is the best in the world. We can also make tube according to your requests. So that we can make sure the tube can work well for your application. Also, our tubes have tight tolerances. Tolerances are important but not all manufacturers can supply the carbon fiber tube with tight tolerances. So, it's better to let us know the specifications of your tubes, then we can get your customized carbon fiber tube soon!

Frequently Asked Questions About Carbon Fiber Tubes

1. What’s the feature of your product?

There are many good characteristics of our carbon fiber product, such as lightweight, high strength, durable, and fashion, etc.

2. Can I have a sample order?

Yes, we welcome sample orders to test and check quality. Mixed samples are acceptable. For some products, we can offer free samples. Clients just need to bear the shipping cost.

3. What is the lead time?

The sample needs 1-3 days, mass production depends on order quantity. Normally 6-9 days.

4. Can you accept the mixed batch of different products?

Yes, we are support different product mix wholesale, no limit of raw materials and mechanical parts, and color specifications, etc.

5. What file need if need to do CNC Cutting or molding products?

We Need CAD DXF or DWG files for CNC cutting, 3D, STEP, STP, IGS Files for molding.

6. How do we do quality control?

We have inspectors to check each procedure to avoid any mistakes.

7. How do you pack the goods?

We wrap the goods with soft plastic bags first and then pack them using a cardboard box with foam board inside.

8. How is your after-sale service?

We provide our clients with excellent after-sale service including logistics tracking, application guide, problem solution,