High Modulus Carbon Fiber Tube 10mmx8mmx330mm 3K Roll Glossy

Product Specification

High Modulus Carbon Fiber Tube 10mmx8mmx330mm 3K Roll Glossy

 
Carbon fiber is a new type of high strength and high modulus fiber material with carbon content above 90%, which has the characteristics of light weight, high strength, corrosion resistance, high modulus, low density, no creep, super high temperature resistance in non-oxidizing environment, good fatigue resistance, good electrical and thermal conductivity, etc. It not only has the inherent intrinsic characteristics of carbon materials, but also has the softness and processability of textile fibers, and is a new generation of reinforcing fiber.
 
Roll wrapped carbon tubes are infinitely customizable and perfect for a variety of applications for which weight and stiffness are important. We have engineered wrapped carbon tubes for use in UAVs (Unmanned Aerial Vehicles, or drones), hiking sticks, pool cues, gun barrel sleeves, scientific measuring instruments, and antennas. Our wrapped composite tubes are even on Mars as the legs of NASA’s Ingenuity Helicopter!
 
Roll-wrapped composite tubes start with a mandrel and some pre-preg fabric cut into flags. Pre-preg is carbon or other composite cloth pre-impregnated with resin. We wrap the fabric flags around the mandrel, compact the tube with cellophane tape, and then cure the tube in a special oven. The resin in the pre-preg fabric liquifies in the oven, disperses equally throughout the composite fabric layers, and then solidifies. We finish the tube by extracting the mandrel, removing the cellophane compaction tape, and trimming the ends.
 
A composite tube is manufactured from two or more constituent materials. Individually, these materials have significantly distinctive properties. These properties could be either physical or chemical, and when these materials have been combined by the Composite Tubes manufacturer, the result is a composite material with characteristics unconventional to that of either of the individual components. The preference for composites comes down to several reasons. It could be their lower cost, or higher strength or even their lighter weight. One of the most primary applications for a Composite Tube is its use in structural purposes for buildings, bridges and construction.
Advantages:

• Sheet made with advanced infusion technology (in vacuum) that ensures stiffness improved by approximately 30% compared to manually produced sheets.
• Made from high quality 100% carbon fiber.
• Mirror-like perfect gloss of top layer.
• Extraordinary appearance, without any defects related to air micro bubbles (pinholes) – very common in the case of manually produced sheets.
• Low weight – only ~ 7.3 kg (17.84 lb).
• The sheet is cured in production at 50 °C to improve bending strength, stiffness and thermal resistance up to 70 °C.
• Cut to dimensions with CNC machining center – which ensures stable and precise dimensions.
• Easily cutting with traditional tools such as a scroll saw, blade or grinder.

 
Our Service:
 
1. It ensures that a year of quality assurance and 24 hours online customer service.
2. Protection of your sales area, ideas of design, and all your private information.
3. Request for samples is accepted.
4. Drilling and slotting are accepted.
5. We guarantee the products to be manufactured with the finest materials and mature technics.
All tubes can be repaired at no charge if returned to us, postage prepaid, within one year.
 
FAQ:
 
1. Can you produce according to the samples or drawings?
Yes, we can produce your samples or technical drawings. We can create the molds and fixtures.
 
2. What are your terms of payment?
Usually, we accept T/T, irrevocable L/C at sight. For regular orders, Terms of payment 30% deposit, balance before shipment.
 
3. What is the lead time?
It usually takes 25 to 35 days after sample confirmation and receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
 
4. What are your terms of packing?
Generally, we pack our goods in neutral cartons. It is fragile we will make the wooden frame. and we also can according to your requirements.
 
5. What are your terms of delivery?
We accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or cost-effective for you.
 
6. How to solve the quality problems after sales?
Take photos of the problems and send them to us. We will make a satisfied solution for you within 24 hours after we confirm the problems.
 
7. Is it OK to print my logo on carbon fiber products?
Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
 
8. You are a manufacturer or trading company?
We are a factory. Welcome to visit our factory at any time.