Premium Carbon Fiber Sheets 100X200X0.5MM 100% 3K Twill Matte Carbon Fiber Plate

Product Specification

Premium Carbon Fiber Sheets 100X200X0.5MM - 100% 3K Twill Matte Carbon Fiber Plate

LIJIN’s Twill Matte Carbon Fiber Plate is ideally used in high-end decorative projects. Our proprietary Autoclave curing process produces consistent, high-quality sheets every time. It is constructed with layers of unidirectional carbon fiber prepreg laid up in a 0/90 degree orientation with a single layer of 2×2 twill carbon fiber prepreg on each of the outside surfaces. This type of construction produces a decorative laminate that has the classic carbon fiber look but with greater strength and stiffness than our Unidirectional Carbon Fiber Sheets.

Our proprietary Autoclave curing process produces the most consistent and highest quality gloss carbon fiber sheets possible. Manufactured using 100% real carbon fiber fabric pre-impregnated with high-quality epoxy resin, these sheets are cured at high temperatures and pressure to ensure a strong, rigid product that cannot be re-shaped after curing. Unlike a wet layup, our Autoclave curing process consistently yields flat, lightweight sheets with minimal voids, waves, or buildups.

Features

• Premium Carbon Fiber Sheets - Our high-strength vacuum-infused composite carbon fiber sheets are manufactured using 100% carbon fiber reinforced with a clear epoxy resin matrix. All composite stacks are laid by hand to ensure maximum homogenization of fiber alignment that provides high bending stiffness and axial strength
• Wide Application - Carbon fiber sheets with twill weave pattern were straight and uniform, which have an attractive appearance and performance, great for DIY hobbyist projects like R/C cars or drones, quadcopters, and Prototypes, backing plates, dash filler plates, etc.
• High-Performance Design - Carbon fiber sheets have a matte finish on both sides with a plastic surface protection sheet and have been press cured for maximum carbon density and strength, with high-grade mechanical properties and a perfect surface finish.
• Super Strong & Lightweight - Our carbon sheets are super stiff, sturdy, lightweight, durable, will not tear or rip easily, and are easy to cut with a saw or water jet without crumbs being created, and do some amazing DIY jobs easily.
• Customer Support: We have 0.5MM/1MM/2MM/3MM thickness sheets that are chosen. Please check the finish of the surface after receiving the goods. If you have any questions, please contact our customer service team. We are happy to solve them for you.

Why Choose LIJIN Carbon Fiber Sheets?

• Our Carbon fiber sheets are fabricated from 100% 3K carbon fiber material, lightweight but stronger.
• The carbon fiber sheets are ideal for building lightweight frames and structures or repair plates.
• Both sides of the sheets have a classic twill weave appearance with a high-gloss finish.
• Carbon fiber sheets are corrosion-resistant, wear-resistant, high-temperature resistant, high-strength, lightweight, and widely applied in life.
• Carbon Fiber Sheet Great for DIY Hobbyist Projects, like prototypes, R/C Cars, drones, quadcopters, Bows, knives, key fobs, purses, and many more!

Carbon Fiber Sheet Plate Specification: