Guangzhou Helioson Car Care Co., Ltd.
| Supply Ability | 1000000pcs/month |
| Water Contact Angle | Less Than 10 Degrees |
| Application Methods | Dedicated Coating Scraper For Detailing Spray Or Roller Coating For Factory Application |
| Full Curing Time | Approximately 24 Hours At Room Temperature |
| Packaging Details | 1pcs/ctn |
| Surface Drying Time | 1 To 5 Minutes At Room Temperature |
| Suitable Glass Surfaces | Automotive Windshields Side Windows Rear Windows And Mirrors |
| Net Volume | 20L |
| Coating Hardness | Up To 4H+ |
| Payment Terms | T/T |
| Cured Film Appearance | Ultra Thin Transparent Layer |
| Delivery Time | 30 working days |
| Coating System | Pure inorganic nano-silica system containing approximately 5 nm titanium dioxide particles |
| Stated Abrasion Durability | Exceeding 25000 Cycles |
| Model Number | GT-1238A |
| Brand Name | Getsun |
| Place of Origin | China |
| Certification | ISO9001/MSDS |
View Detail Information
Explore similar products
GETSUN Glass Cleaner Remove Oil Film and Limescale
Glass Cleaner Wipes for Car Windows and Mirrors
Windshield Rain Repellent Manufacturer | Getsun Car Glass Rain Repellent
Anti Freeze Car Glass Cleaner Fluid For Windshield Crystal Clear 500ml
Product Specification
| Supply Ability | 1000000pcs/month | Water Contact Angle | Less Than 10 Degrees |
| Application Methods | Dedicated Coating Scraper For Detailing Spray Or Roller Coating For Factory Application | Full Curing Time | Approximately 24 Hours At Room Temperature |
| Packaging Details | 1pcs/ctn | Surface Drying Time | 1 To 5 Minutes At Room Temperature |
| Suitable Glass Surfaces | Automotive Windshields Side Windows Rear Windows And Mirrors | Net Volume | 20L |
| Coating Hardness | Up To 4H+ | Payment Terms | T/T |
| Cured Film Appearance | Ultra Thin Transparent Layer | Delivery Time | 30 working days |
| Coating System | Pure inorganic nano-silica system containing approximately 5 nm titanium dioxide particles | Stated Abrasion Durability | Exceeding 25000 Cycles |
| Model Number | GT-1238A | Brand Name | Getsun |
| Place of Origin | China | Certification | ISO9001/MSDS |
| High Light | 20L hydrophilic nano glass coating ，GT-1238A car glass coating ，nano glass coating for cars | ||
A transparent inorganic coating with water-spreading performance, reduced dust adhesion and room-temperature curing for professional glass treatment.
GETSUN GT-1238A is a hydrophilic glass coating supplied in a 20L container for automotive glass treatment. Its nano-silica fractal combination technology incorporates approximately 5 nm titanium dioxide particles and forms a microstructure smaller than 50 nm on the substrate surface. After curing, the product creates an ultra-thin transparent layer.
The specified contact angle is less than 10 degrees. This promotes water spreading across the treated glass and supports self-cleaning under rain or condensation. The coating helps reduce dust and stain adhesion while maintaining glass transparency.
The maintenance challenge
For workshops treating vehicle windows and mirrors, dust accumulation and adhered stains are key maintenance concerns. Surface contamination also needs to be removed before a new coating is applied.
The coating approach
The hydrophilic surface supports water-assisted cleaning, while antistatic performance helps reduce dust accumulation. Preparation remains essential for coating adhesion.
This automotive glass coating suits projects that require a transparent, hydrophilic surface treatment on the listed vehicle glass areas.
Use after glass polishing and rinsing, once the surface is free of oily contamination, with a dedicated coating scraper.
The supplied directions cover spray coating or roller coating after cleaning, with plasma treatment recommended before coating.
Specify the cured coating where water-assisted self-cleaning and reduced stain adhesion are required. Application itself must avoid rainy conditions.
A specified contact angle below 10 degrees supports water spreading and self-cleaning under rain or condensation.
This nano glass coating forms an ultra-thin transparent layer using an inorganic nano-silica and titanium dioxide system.
The coating helps reduce dust accumulation and adhesion on treated glass surfaces.
The supplied specification lists surface drying in 1 to 5 minutes and full curing in approximately 24 hours.
Pure inorganic materials provide weather and wear resistance, with coating hardness specified up to 4H+.
Supplied performance figures include abrasion durability exceeding 25,000 cycles and a protection lifespan of over 5 years. Request test conditions and supporting documentation when assessing these figures for a project.
For buyers comparing a self cleaning glass coating, the key decision points are surface behaviour, preparation requirements and the intended coating process. GT-1238A uses a hydrophilic mechanism, so the specified result is water spreading across glass.
The transparent coating layer treats the surface while preserving the clear appearance of automotive glass.
Self-cleaning and antistatic functions help address stain adhesion and dust accumulation on treated areas.
Separate detailing and factory directions, together with drying and curing times, help buyers assess the product against their treatment process.
The supplied application scope covers automotive windshields, side windows, rear windows and mirrors. Select the cleaning and coating method appropriate to the glass treatment process.
Remove oily contamination before coating. Do not apply directly to hydrophobic surfaces, as this may reduce adhesion. Apply promptly after cleaning to prevent dust contamination.
Follow the supplied preparation sequence before applying the coating to automotive glass.
Clean the glass surface with a glass polishing compound to remove contamination.
Rinse with clean water. A hydrophilic water film on the surface indicates that the glass is free of oily contaminants.
Apply using a dedicated coating scraper. Coat immediately after cleaning to prevent dust contamination, and avoid application during rainy conditions.
Surface drying is specified at 1 to 5 minutes at room temperature. Full curing takes approximately 24 hours; surface drying does not mean that curing is complete.
Clean the glass surface first. Plasma treatment is recommended before spray coating or roller coating. Apply immediately after cleaning to prevent dust contamination, and avoid direct application to hydrophobic surfaces.
| Order Reference | GETSUN GT-1238A, supplied in the shown 20L container. |
|---|---|
| Treatment Objective | Create a transparent hydrophilic layer with self-cleaning and antistatic functions on the listed automotive glass surfaces. |
| Process Selection | Dedicated scraper application for detailing; spray or roller coating for factory processing, with plasma pretreatment recommended. |
| Technical Review | Review the full-curing schedule, substrate preparation and supporting conditions for the stated hardness, abrasion and lifespan figures. |
Recommended storage temperature: 18 to 25 degrees Celsius. This is a storage recommendation, not a specified application-temperature range.
It is hydrophilic, with a specified contact angle below 10 degrees. Its intended surface behaviour is water spreading, supporting self-cleaning under rain or condensation.
The listed applications are automotive windshields, side windows, rear windows and mirrors. Clean and prepare each surface before coating.
For detailing, clean with a glass polishing compound and rinse with clean water. A hydrophilic water film indicates the absence of oily contamination. For factory application, plasma treatment is recommended after cleaning and before spray or roller coating.
At room temperature, surface drying is specified at 1 to 5 minutes and full curing at approximately 24 hours. These are separate stages of the coating process.
The supplied specification states abrasion durability exceeding 25,000 cycles, hardness up to 4H+ and a protection lifespan of over 5 years. These are stated performance figures, not an unconditional service-life guarantee; request supporting test methods and conditions for technical evaluation.
For GT-1238A technical specifications, 20L packaging information and quotation details, contact our product team to discuss your glass coating requirements.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2008
Total Annual:
13500000-25000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou Helioson Car Care Co., Ltd. is a professional and high-tech chemical manufacturer specializing in automotive care products. As a strategic partner of 4-X Company, a well-known enterprise based in the United States, we integrate R&D, production, sales, and service into one. Founde... Guangzhou Helioson Car Care Co., Ltd. is a professional and high-tech chemical manufacturer specializing in automotive care products. As a strategic partner of 4-X Company, a well-known enterprise based in the United States, we integrate R&D, production, sales, and service into one. Founde...
Get in touch with us
Leave a Message, we will call you back quickly!