Car Instant Flat Tyre Shine Gel Emergency Repair Sealant Spray

Product Specification

Tyre Weld – Emergency Tire Repair Sealant for Tubeless Tires

Product Overview

GETSUN Tyre Weld is a fast and convenient emergency solution for tubeless car tires. In the event of a sudden puncture or air leak, this product allows drivers to temporarily restore tire pressure and continue driving without immediate disassembly or tire changes. It is especially useful for roadside emergencies, providing a reliable seal and inflation in minutes.

Detailed Description

This one-step aerosol sealant automatically seals punctures up to 5mm in diameter on the tire tread and reinflates the tire for temporary mobility. Designed for tubeless tires only, GETSUN Tyre Weld allows the vehicle to be driven to the nearest service station for proper repair or replacement. It is not suitable for sidewall damage or tires removed from the rim.

GETSUN’s formula ensures minimal rubber damage and no corrosion, making it safe for subsequent tire repair procedures by professionals.

Product Features

• Quick Emergency Solution: Seals and inflates a flat tubeless tire within minutes

• No Tools Required: Just shake, connect, and spray

• Safe and Non-Corrosive: Will not damage tire rubber or rim

• Time-Saving: Eliminates the need for immediate tire disassembly

• Convenient Storage: Compact size for glove box or trunk storage

• Wide Vehicle Compatibility: Suitable for sedans, convertibles, SUVs, minivans, and trailers

Application Scenarios

• Roadside emergency tire repairs

• Long-distance travel where tire shops are unavailable

• Urban commuters and delivery vehicles

• Nighttime breakdowns and unexpected punctures

Packaging Information

• Specification: 450ml / can

• Packing: 12 cans / carton

• OEM Services: Available for brand labeling and packaging customization

How to Use

1. Locate and rotate the puncture site to the bottom of the tire (if visible).

2. Deflate the tire fully.

3. Shake the can well. If in cold weather, warm it by hand or with car heating.

4. Clean the tire valve and attach the connecting tube tightly to the valve.

5. Hold the can upright and turn the switch 90° to ON to start inflating and sealing.

6. When sealing is complete, turn the switch 90° to OFF, detach the tube, and replace the valve cap.

7. Immediately drive at 10–20 km/h for a few kilometers to distribute the sealant evenly.

8. Visit a tire service point as soon as possible for full inspection and repair.

Cautions

• Drive at no more than 45 km/h after use.

• Do not use on:

  • Tires removed from the rim

  • Sidewall holes

  • Punctures larger than 5 mm

• Keep away from heat sources above 48°C

• Do not puncture or burn the canister

• Keep out of reach of children

• Inform the technician that Tyre Weld has been used before tire repair

• Use in a well-ventilated area

• Not suitable for welding or high-temperature work near sealed tires

FAQ

Q1: Is this product permanent?
A: No, it is a temporary fix. Visit a professional repair shop as soon as possible.

Q2: Can I use this on all types of tires?
A: It is only suitable for tubeless tires and must not be used on sidewall punctures or large cracks.

Q3: Will it damage the tire or rim?
A: No, GETSUN Tyre Weld is formulated to be rubber-safe and non-corrosive.

Q4: What if it's too cold to use?
A: Warm the can slightly by hand or place near the car heater for a short time before use.

Q5: Can I store this in the car?
A: Yes, but keep it in a cool, dry place, such as the trunk, and away from direct sunlight.