Hangzhou Bestseal International Trade Co., Ltd.
| Delivery Time | 15 working days |
| Stationary face product side | SSiC - Carbon, TC |
| Packaging Details | Carton |
| Elastomer | EPDM / FPM, FFPM |
| Supply Ability | 1000000/Month |
| Metal parts | EN 1.4436/1.4460, Titanium / EN 1.4462 |
| Payment Terms | T/T,Western Union,D/P,D/A,L/C |
| Springs | EN 1.4401 |
| Rotating face atmospheric side | TC |
| Rotating face product side | SSiC, TC |
| Stationary face atmospheric side | Carbon, SSiC |
| Model Number | Type FS |
| Certification | ISO9001 |
| Brand Name | BESTSEAL |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
LP-D Double Cartridge Mechanical Seal for Sulzer APP APT Pumps
TB1F-30 Single Cartridge Mechanical Seal for Sulzer AHLSTAR Pumps
TB2P-40 Double Cartridge Mechanical Seal for Sulzer AHLSTAR Process Pump
MA390 MA391 Standard Cartridge Mechanical Seals EagleBurgmann Seal for Pumps
Product Specification
| Delivery Time | 15 working days | Stationary face product side | SSiC - Carbon, TC |
| Packaging Details | Carton | Elastomer | EPDM / FPM, FFPM |
| Supply Ability | 1000000/Month | Metal parts | EN 1.4436/1.4460, Titanium / EN 1.4462 |
| Payment Terms | T/T,Western Union,D/P,D/A,L/C | Springs | EN 1.4401 |
| Rotating face atmospheric side | TC | Rotating face product side | SSiC, TC |
| Stationary face atmospheric side | Carbon, SSiC | Model Number | Type FS |
| Certification | ISO9001 | Brand Name | BESTSEAL |
| Place of Origin | CHINA | ||
| High Light | FS Split Cartridge Mechanical Seal ，Single Cartridge Mechanical Seal ，FFPM balanced mechanical seal | ||
Huhnseal Type FS Split Balanced Single Cartridge Mechanical Seal for Pumps and Agitators
Cartridge Mechanical Seal
FS
Split balanced single cartridge seal
It is ideal for installation in pumps and agitators where it is difficult to remove the shaft and it handles normal pressure, temperature and speed. Because the seal is delivered in two halves which are mounted together with eight screws it is very easy to install. The seal is assembled outside the pump and then pushed along the shaft on to the pump cover and then the gland bolts are tightened. When the set screws are tightened the distance clips can be removed. Huhnseal FS is available in shaft dimensions between 40-200 mm.
Features
1 / 2 / 3
Rotating seal ring / Shaft sleever / Static O-ring
4/ 5 / 6 / 7
Stationary spring loaded seal ring / Flange / Secondary seal / Static O-ring for the shaft
8 / 9 / 10 / 11
Holes for screws / Hole for guide pin / Distance clip / Gasket for pump cover
The easiest installation of any split seal in the world
Simply attach the two halves over the shaft and mount to the pump like any other cartridge seal.
Only split seal in the world in which just two pieces are handled
No handling of lapped faces as both are secured safely in the cartridge halves. Faces can’t get cocked, chipped or scarred.
Only split seal where impeller can be adjusted without removing the seal
Simply reinstall setting clips, release set screws and adjust impeller position, then retighten set screws and remove the clips.
Only split seal that can be fully assembled and pressure tested at the factory
Sealing integrity is insured completely before being sent to the field. Ensuring each installation of the highest success rate.
No measurements, no shims, no special tools and no glue
Standard cartridge setting clips assures proper axial and radial alignment and makes installation even easier.
Performance Capabilities
| Temperature | -20℃ to 200℃, dependent on the elastomer |
|---|---|
| Pressure | Up to 2.5MPA |
| Speed | Up to 15 m/s |
| End play/axial float allowance | ±0.1mm |
| Brand | BESTSEAL |
| Packing | Individual packing ,1 pc in 1 small box is available as well |
| Application Areas |
Mining & Slurry Pulp & Paper Chemical industry W&WW and Dewatering |
BESTSEAL — Your Reliable Partner for Mechanical Seals
| BESTSEAL Advantage: | |
| 15 years | Focused in mechanical seal manufacturing |
| 3 hours | Quotation response only takes 3 hours |
| 1 day | Provide production assembly drawings |
| 1 piece | MOQ, One piece can also be produced |
| 15-20 working days | The production cycle only takes 15-20 working days |
| real-time | Real time synchronization of production progress |
BESTSEAL Cartridge Mechanical Seal
Your Fast-Track Alternative to Huhnseal Type FS
Custom Cartridge Mechanical Seals — From Drawing to Delivery in 15–20 Working Days
Company Details
Business Type:
Manufacturer
Year Established:
2012
Total Annual:
3000-5000
Employee Number:
200~300
Ecer Certification：
Verified Supplier
.gtr-container-7f8g9h { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; max-width: 100%; box-sizing: border-box; overflow-wrap: break-word... .gtr-container-7f8g9h { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; max-width: 100%; box-sizing: border-box; overflow-wrap: break-word...
Get in touch with us
Leave a Message, we will call you back quickly!