China Hunan High Broad New Material Co.Ltd
| Chemical Composition | AI:2.5-3.5%;Zn:0.7-1.3%;Mn:0.20-1.0%;Mg:Balance |
| Material | Magnesium alloy |
| Shape | sheet/plate/board |
| Process | Extruded/Casting |
| Thickness Range | 0.5 to 7mm |
| Max Width | 600mm |
| Max Length | 1200mm |
| Tensile Strength | 35 ksi |
| Yield Strength | 19 ksi |
| Elongation | 10% |
| Compressive Yield | 10 ksi |
| Thickness Tolerance | ±0.010 to ±0.135 inches |
| Width Tolerance | +3/16 to +5/8 inches |
| Length Tolerance | +3/16 to +5/8 inches |
| Flatness Tolerance | 0.005 to 0.020 inches |
| Model Number | AZ31 AZ61 AZ91 WE43 ZK60 |
| Brand Name | HB |
| Place of Origin | Hunan, China |
| Certification | ISO9001,ISO14001,EJ/T9001-2005 |
View Detail Information
Explore similar products
WE43 - T5 Hot Rolled Extrude Magnesium Plate For Aircrafts Marine Vessel Missles
0.1mm 0.3 mm Pure Magnesium Foil Super Thin Sheet Mg 99.9% Min ISO Passed
Customized Engraving Magnesium Alloy Plate for art drawing AZ31B AZ61 AZ91D 99
Magnesium Etching Plate / Magnesium Carving Sheet Az31 Az31b Az91 Az91d
Product Specification
| Chemical Composition | AI:2.5-3.5%;Zn:0.7-1.3%;Mn:0.20-1.0%;Mg:Balance | Material | Magnesium alloy |
| Shape | sheet/plate/board | Process | Extruded/Casting |
| Thickness Range | 0.5 to 7mm | Max Width | 600mm |
| Max Length | 1200mm | Tensile Strength | 35 ksi |
| Yield Strength | 19 ksi | Elongation | 10% |
| Compressive Yield | 10 ksi | Thickness Tolerance | ±0.010 to ±0.135 inches |
| Width Tolerance | +3/16 to +5/8 inches | Length Tolerance | +3/16 to +5/8 inches |
| Flatness Tolerance | 0.005 to 0.020 inches | Model Number | AZ31 AZ61 AZ91 WE43 ZK60 |
| Brand Name | HB | Place of Origin | Hunan, China |
| Certification | ISO9001,ISO14001,EJ/T9001-2005 | ||
| High Light | Extruded/Casting Magnesium Alloy Plate ，Corrosion Resistant Magnesium Sheet ，Lightweight Magnesium Tooling Plate | ||
This standard covers magnesium tooling plate of one grade and quality offered for sale for use in jigs, fixtures, gauges and other applications.
Composition
Magnesium tooling plate is made to AZ31 composition shown in the Chemical Composition of Magnesium Tooling Plate table below. Tooling plate can be supplied to MIL-T-38749 on inquiry.
Chemical Composition of Magnesium Tooling Plate
Alloy | Mg | Al | Ca | Mn | Ih | Zn | Zr | Cu max. | Fe max. | Ni max. | Si max. | Other imp. max. |
AZ31 | Bal. | 2.5-3.5 | 0.04 max | 0.20 min. | - | 0.7-1.3 | - | 0.05 | 0.005 | 0.005 | 0.05 | 0.30 |
Properties
Typical mechanical properties os AZ31 tooling plate are shown in the table below. Minimum properties are not guaranteed.
Thickness, inches | TS, ksi | TYS, ksi | Elong. in 2″, % | CYS, ksi |
0.250-6.000 | 35 | 19 | 10 | 10 |
Standard Sizes
Thickness | Size | ||
.250, .375 | 48″x 96″ | 48″x 144″- | - |
.500, .625, .750, 1.000 | 48″x 96″ | 48″x 144″ | 60″x 144″ |
1.250, 1.500, 1.750 | 48″x 96″ | 48″x 144″ | 60″x 144″ |
2.000, 2.500, 3.000 | 48″x 96″ | 48″x 144″ | 60″x 144″ |
3.500 | 48″x 96″ | - | - |
4.000 | 49″x 84″ | - | - |
5.000 | 49″x 72″ | - | - |
6.000 | 49″x 60″ | - | - |
Special Inquiries: For thicknesses over 6 inches, widths over 60 inches, and non-standard lenghts.
Tolerances
Thickness
Thickness – maximum variation in gauge within a plate ± 0.010 plate to plate variation | |
Specified thickness, inches | Tolerance ±, inches |
0.250-0.750 | 0.010 |
0.751-1.250 | 0.017 |
1.251-2.000 | 0.025 |
2.001-3.000 | 0.050 |
3.001-3.250 | 0.065 |
3.251-3.500 | 0.080 |
3.701-4.000 | 0.110 |
4.001-5.000 | 0.125 |
5.001-6.000 | 0.135 |
Width and Length Tolerances
Specified | Specified width of length, inch | |||
Up thru 10 | Over 10 thru 48 | Over 48 thru 72 | Over 72 | |
Tolerances, inch + | ||||
0.250-6.000 | 3/16 | 3/8 | 1/2 | 5/8 |
Flatness Tolerances
Specified | Deviation from flat*, inch | |||
In any 1 foot | In any 6 feet | |||
Guaranteed | Typical | Guaranteed | Typical | |
0.250-1.000 | 0.005 | 0.003 | 0.015 | 0.007 |
* Deviations from flat are measured from a straight edge placed on the surface of the plate.
Finish: The side suitable for tooling uses is stencilled. The opposite side is equal or superior to a mill finish.
Packing: Conforms to requirements of carrier through which shipment is made. Both domestic and export packing available.
· AZ31 / AZ31B – Rod, Tooling Plate
· AZ31B-H24 – Spec Grade – Sheet & Plate Sheet, Plate
· AZ91C – As cast or heat treated – Castings
· AZ91E – As cast or heat treated – Castings
· AZ80 – Bar
· EV31A – As cast or heat treated – Castings
· ZE41A – As cast or heat treated – Castings
· ZK60A – Bar, Sheet, Plate
Extruded Magnesium Alloys and Forms Available
| Magnesium Plates OEM | High Purity AZ31B AZ91 WE43 Magnesium Plates,magnesium sheet |
| Application | CNC engraving |
| Shape | sheet/plate/board |
| Chemical Composition | AI:2.5-3.5%;Zn:0.7-1.3%;Mn:0.20-1.0%;Mg:Balance |
| Process | Extruded/Casting |
| Size | thickness from 0.5 to 7mm; Max width is 600mm; Max. length is 1200mm |
| Other name | Magnesium Alloy Rod Bar |
| Type | MIC,High potential,AZ63C,AZ31 |
| Certification | ISO9001,ISO14001,EJ/T9001-2005 |
| Packaging | In Carton /wood crate/on pallet |
| Product Keywords | free shipping photoengraving to plates magnesio |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Seller
Year Established:
2006
Total Annual:
15000000-20000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
China Hunan High Broad New Material was founded in 2006, focus on the business in advanced new material and service. Including: design, installation, material , engineering, maintenance and technical support. Our sales office located in Changsha, Hunan province, plant located in Hunan,S... China Hunan High Broad New Material was founded in 2006, focus on the business in advanced new material and service. Including: design, installation, material , engineering, maintenance and technical support. Our sales office located in Changsha, Hunan province, plant located in Hunan,S...
Get in touch with us
Leave a Message, we will call you back quickly!