BTB TECHNOLOGY CO.LTD
| Payment Terms | T/T L/C WESTER UNIN PAYPAL |
| Supply Ability | 10000000pcs |
| Delivery Time | 5-7days |
| Packaging Details | Paper box |
| level | vi |
| output | 12v 2a 5V 2A |
| warranty | 3years |
| Brand Name | BTB |
| Model Number | BTB-S12-24 |
| Certification | CE FCC UL GS SAA PSE Rohs CCC |
| Place of Origin | Shenzhen China |
View Detail Information
Explore similar products
12V 1A charger and 12V 1A car charger for GM tech
12V 400mA AC DC Power Adapter or Braun 15V 5.4W Charger For Shaver Norelco
45W 60W 85W Charger For Magsafe Power Adapter/Charger For Apple MacBook Pro
AC DC Power Adapter 5V 1A 5V2A USB Mini Charger With Micro Cable CE EMC LVD UL
Product Specification
| Payment Terms | T/T L/C WESTER UNIN PAYPAL | Supply Ability | 10000000pcs |
| Delivery Time | 5-7days | Packaging Details | Paper box |
| level | vi | output | 12v 2a 5V 2A |
| warranty | 3years | Brand Name | BTB |
| Model Number | BTB-S12-24 | Certification | CE FCC UL GS SAA PSE Rohs CCC |
| Place of Origin | Shenzhen China |
8.4v 1a li ion Battery Charger
Description
The specification defines the performance characteristics of a 3.65W. Single Output level Switching Power Supply for GJS12-036100 The power supply has designed highly reliable and meet intermational safety and electromagnetic compatibility requirements.
1 . Input Characteristics.
1.1 Normal Input Voltage:
It is normal for 100-240Vac input AC voliage
1.2 Input Voltage Range:
The Power shall operate form 90-264Vac
1.3 Input Current:
| 0.2Arms max | AI AC low line input and DC output full load |
1.4 Rated Input Frequency:
It is normal for 50Hz or 60Hz and single phase.
1.5 AC Input Frequency Range:
The Power shall operate with an input frequency from 47Hz to 63Hz
1.6 No Load Power Consumption:
Maximum non-load power consumption is less than 2.0W ai 115Vac/60HZ and 230Vac/50HZ
1.7 Inrush Current (cold start) : 30A Max.@110 Vac/60HZ
:60A Max. @230Vac/50HZ
1.8 Active Power Factor Correction: Typical •••
1.9 Input protection:
|
3.15A Fuse | The power supply shall be protected against power line surges and any abnormal condition. |
1.10 Efficiency:
| 230Vac/50Hz Efficiency(Typical full load)
| 115Vac/60Hz Efficiency(Typical full load)
|
| 85.0% | 80.0% |
2. Output Characteristics.
2.1 Rated Voltage
The rated output voltage is specified at3.65V
2.2 Voltage Range
The output voltage will be performed 3.65-3.8V when the load is 0A
2.3 DC Load Characteristics
| Output Current(Constant Current) | Minimum Current | Output Voltage (CV mode ) | Output Power |
| 0.9-1.2A | 0 | 2-3.65V | 0-3.65W |
2.4 Use status indication
| Status | LED Indication |
| Standby | Green light |
| 50-400mA | Green light |
| 0.9-1.2A | Red light |
2.5 Ripple/Noise
Output Ripple voltage is 500mV peak to peak or less.(100Vac 60Hz/240Vac 50Hz)
Measured methods:
*The ripple is measured from peak to peak with band width limit of 20MHZ (C1 : 0.1uF Ceramics capacitor C2:47uf/50V Aluminum capacitor under DC output full ) Load, AC nominal input 25℃ ambient temperature).
2.6 Turn on delay (CV mode)
The power shall switch on in less than 3 seconds at input voltage is 115Vac
2.7 Hold-up time ( CV mode)
Schematic diagram The output voltage shall be sustained 6mS within regulation requirement after loss 100Vac and maximum load
2.8 Rise time ( CV mode)
DC output rise time from 10% to 90% of output voltage shall be less than 40mS at nominal line and maximum load
3.1 Over Voltage Protection:
| Over Voltage Protection
| |
| The output shall be protection to latch off at over-voltage condition,maximum value can’t be over 2 times the rated voltage 3.65V),That might be return to normal state by AC reset <=3Minutes
| |
| The power supply will be auto recovered when faults remove
| √ |
3.2 Over Current Protection: Maximum constant current of not greater than 1.5A
The power shall be auto-recovery
3.3 Short Circuit:
Output can be shored without damage No odor, smoke, fire,plastic deformation, and excessive heal happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed)
4 Environment (temperature and humidity)
4.1:Operating temperature 0℃-35℃
4.2:Operating humidity 200%-90% ( Relative humidity).
4.3: Storage temperature -20℃ -80℃.
4.4 Storage humidity 0%-95%. (Relative humidity).
4.5: Dropping Packed:
Wall mount type and Height 76cm for desktop type as. The horizontal surface consists of hardwood at least 13mm thick , mounted on two layers of plywood each 19mm to 20mm thick . all supported on a concrete or equivalent non-resilient floor.
Welcome to OEM/ODM
Free sample
Sample time : 3-5days
Delivery time:7-10days
Trade terms: FOB shenzhen
Payment : T/T ,L/C,PAYPAL ,Western Union
All product warranty 3 years(One years damage manufacture one to one exchange.)
Printing you LOGO and stick you modle also ok .
Credit is the basis , Quality is the first
Power adapter ,Charger ,Power supply Manufacture
Skype:beryl--qin
What's app: 86 13412619588
QQ:1767294269
Wechat: beryl18
www.btbadapter.com
Company Details
Business Type:
Manufacturer,Seller,Other
Year Established:
2002
Total Annual:
1000000-10000000
Employee Number:
150~500
Ecer Certification：
Site Member
Shenzhen BTB Technology Co. ,Ltd ,established in 2002, is a leading manufacturer and exporter of switching and linear power adapters, transformers, chargers, car chargers and high-tech enterprise specialized in developing and manufacturing products in the fields of Power... Shenzhen BTB Technology Co. ,Ltd ,established in 2002, is a leading manufacturer and exporter of switching and linear power adapters, transformers, chargers, car chargers and high-tech enterprise specialized in developing and manufacturing products in the fields of Power...
Get in touch with us
Leave a Message, we will call you back quickly!