500m3 Glass-Fused-to-Steel Tanks: Capacity, Dimensions, and Applications of a 500 m3 GFS Tank

The 500 cubic-meter volume is one of the most common mid-size points in storage specification. It is large enough to serve a village, an industrial process, or a commercial fire reserve, yet small enough for fast delivery and economical erection. Understanding its typical dimensions and where it fits helps specifiers choose the right tank before civil works begin - and avoids the cost of a tank that is too tall for the crane, too wide for the lot, or wrongly shaped for the process.

Shijiazhuang Zhengzhong Technology Co., Ltd (Center Enamel) builds 500 m3 GFS tanks as part of a bolted range spanning 20 to 60,000 m3. The glass-fused-to-steel surface, fired at 820-930 degrees Celsius, delivers the inert, 30-50 year durability that makes the 500 m3 size a low-maintenance workhorse across water, wastewater, and agriculture.

1. What Are the Typical Dimensions of a 500 m3 GFS Tank?

A 500 m3 GFS tank is usually specified as a short cylinder - the diameter-to-height ratio is chosen for site footprint and foundation cost.

• Common geometry: a 500 m3 tank is often about 9-10 m in diameter and 7-8 m tall, or 8 m diameter and 10 m tall depending on footprint.
• Panel module: bolted panels stack in fixed heights, so height lands on practical panel increments rather than arbitrary values.
• Foundation: a ring or slab foundation sized to the filled weight (about 500 tonnes of water plus structure) is designed per soil.
• Footprint planning: diameter drives the site area; a taller, narrower tank saves ground where land is constrained.

2. Where Does a 500 m3 GFS Tank Fit?

The 500 m3 size serves a wide band of duties - large enough for community or process use, small enough for fast delivery and erection.

• Rural and municipal water: village supply, school, and small-town reservoirs where a 500 m3 reserve covers daily demand.
• Wastewater and sludge: equalization, sequence-batch, or sludge holding at small plants and industrial sites.
• Agriculture and irrigation: farm water, livestock, and greenhouse irrigation buffers.
• Fire protection: a 500 m3 reserve meets sprinkler and hose-stream demand for many commercial and industrial buildings.

3. Why Choose GFS at the 500 m3 Scale?

At 500 m3 the GFS advantages - no recoating, fast bolted build, and certified potable use - deliver outsized lifecycle value.

• No recoating: the fused-glass surface lasts 30-50 years without the paint or galvanize renewal a 500 m3 coated tank would need.
• Fast, clean build: bolted panels erect in weeks with no on-site painting - important on occupied or remote sites.
• Potable certified: NSF/ANSI 61 and WRAS certification lets the same tank serve drinking water without relining.
• Scalable fleet: multiple 500 m3 tanks parallel to reach larger volumes, simplifying phased expansion.

Engineering Assurance

Center Enamel 500 m3 GFS tanks are FEA-verified to AWWA D103-09, manufactured under ISO 9001/45001, 100% high-voltage holiday spark tested at 1,500V, and certified to NSF/ANSI 61, ISO 28765, WRAS, and EN 1090 - built for 30-50 year service from the 20-60,000 m3 GFS range.

The 500 m3 tank is where most projects start - big enough to matter, small enough to move fast. Get the geometry and the lining right at this size and the whole fleet scales from there. -

Frequently Asked Questions (FAQ)

What are the dimensions of a 500 m3 GFS tank?

A 500 m3 glass-fused-to-steel tank is typically about 9-10 m in diameter and 7-8 m tall, or 8 m diameter and 10 m tall, chosen for footprint and foundation cost. Panel heights land on practical bolted increments, and the foundation is sized to roughly 500 tonnes of water plus structure.

What can a 500 m3 tank be used for?

The 500 m3 size suits rural and municipal water supply, wastewater equalization and sludge holding, agricultural and irrigation storage, and fire protection reserves for many commercial and industrial buildings. Its NSF/ANSI 61 certification also allows potable use.

Why pick GFS for a 500 m3 tank?

At 500 m3 the fused-glass surface lasts 30-50 years with no recoating, bolted panels erect in weeks with no field painting, and NSF/ANSI 61 and WRAS certification covers potable use - giving strong lifecycle value over concrete or welded steel.

Can a 500 m3 GFS tank be customized?

Yes - diameter-to-height ratio, roof type, liner grade (pH 3-11 standard, 1-14 special), insulation, heating, and fittings are engineered per duty, and multiple 500 m3 tanks can parallel for larger volumes.

Key Takeaways

• A 500 m3 GFS tank is typically 9-10 m diameter by 7-8 m tall, sized to site footprint.
• The size fits water, wastewater, agriculture, and fire protection across many building types.
• GFS gives 30-50 year life with no recoating and NSF/ANSI 61 potable certification at this scale.
• Center Enamel builds 500 m3 and the full 20-60,000 m3 GFS range, exported to 100+ countries.