| Delivery Time | 0-60 days after deposit received |
| Defect free | Minimum maintenance needed |
| Payment Terms | L/C,T/T |
| Acid and alkalinity proof | PH1 - PH14 |
| Steel plates thickness | 3mm - 12mm , depends on the diameter & height |
| Packaging Details | PE poly-foam between each two steel plates ; wooden pallet and wooden box |
| Impact Resistance | Excellent |
| Supply Ability | 60 sets per month |
| Applications | Water , waste water, digester , reactor , grain , sludge , chemicals |
| Usage | Waste water treatment , sewage treatment, effluent treatment, ect. |
| Model Number | W20161227006 |
| Brand Name | CEC TANKS |
| Certification | ISO 9001:2008, AWWA D103 , OSHA , BSCI |
| Place of Origin | China |
View Detail Information
Explore similar products
Glass-Fused-to-Steel Tanks for Cow Dung Anaerobic Digesters: Maximizing Biogas
The First Glass-Lined Steel Tanks Manufacturer in China
Glass Fused to Steel Potable Water Storage Tanks with Aluminum Dome Roofs:
Expandable Glass Fused to Steel Tanks Made of ART 310 Steel Plate: Advanced
Product Specification
| Delivery Time | 0-60 days after deposit received | Defect free | Minimum maintenance needed |
| Payment Terms | L/C,T/T | Acid and alkalinity proof | PH1 - PH14 |
| Steel plates thickness | 3mm - 12mm , depends on the diameter & height | Packaging Details | PE poly-foam between each two steel plates ; wooden pallet and wooden box |
| Impact Resistance | Excellent | Supply Ability | 60 sets per month |
| Applications | Water , waste water, digester , reactor , grain , sludge , chemicals | Usage | Waste water treatment , sewage treatment, effluent treatment, ect. |
| Model Number | W20161227006 | Brand Name | CEC TANKS |
| Certification | ISO 9001:2008, AWWA D103 , OSHA , BSCI | Place of Origin | China |
| High Light | SUS304 bolted wastewater tanks ,factory supply wastewater tanks ,glass fused steel wastewater tanks | ||
An SUS304 bolted wastewater tank is a stainless steel vessel assembled from factory-fabricated SUS304 panels with A4-80 stainless bolting for hygienic, corrosion-resistant storage. Grade 316L is specified where chlorides are high. Built under EN 1090 and AWWA D103-09 by Shijiazhuang Zhengzhong Technology Co., Ltd. (Center Enamel), these tanks serve food, pharma, and clean-industrial wastewater at 20-5,000 m3.
An SUS304 bolted wastewater tank is a vessel built from austenitic stainless steel panels of grade SUS304, bolted with A4-80 stainless fasteners and gaskets. The 2B or satin surface resists corrosion for 30-50 years and stays cleanable, which matters for food and pharma effluent. Capacities run 20-5,000 m3, and the shell is calculated to EN 1090 and AWWA D103-09.
SUS304 tanks pair with grade 316L where chlorides or pitting risk is high; both use bolted panels, sealed roofs, and hygienic nozzles. Passivation with citric acid reinforces the oxide layer after fabrication. Alternatives are GFS or FBE coated steel, but stainless is chosen when product purity and cleanability outweigh cost for sensitive wastewater streams.
They serve food processing, beverage, dairy, pharmaceutical, and clean-industrial wastewater where stainless contact is required. Operating temperature spans 4-60°C, and the inert surface resists the mild chemicals used in these streams. A factory builds the panels under controlled welding and passivation, so quality is consistent from the first to the last tank.
Specify the grade (304 or 316L), wall thickness of 3-12 mm for the head, and passivation after fabrication. The shell is calculated to EN 1090 and AWWA D103-09, and bolts are A4-80 stainless for joint integrity. Even at 20-5,000 m3, inlet, outlet, and mixer sizing follow the same code discipline as larger carbon-steel tanks.
A stainless SUS304 tank gives a hygienic, corrosion-resistant, low-maintenance vessel with a 30-50 year life and excellent cleanability. The limitation is cost and chloride pitting: 304 is not the right choice in high-chloride streams without upgrading to 316L, and buyers must confirm the chloride level during specification rather than after delivery.
The figures below are the load-bearing values a factory should quote per SUS304 tank; capacities reach 5,000 m3 and design life runs 30-50 years. They let an engineer confirm the grade, wall, and joint system before stainless panels are cut.
| Design parameter | Typical value or range | Why it matters |
|---|---|---|
| Capacity range | 20-5,000 m3 | Compact to mid wastewater |
| Shell material | SUS304 / 316L | Corrosion-grade choice |
| Wall thickness | 3-12 mm | Pressure and head |
| Surface finish | 2B / satin | Cleanability |
| Design temperature | 4-60 °C | Wastewater range |
| Bolt grade | A4-80 stainless | Joint integrity |
| Design life | 30-50 years | With passivation |
| Code basis | EN 1090 / AWWA D103-09 | Design authority |
| Passivation | Citric acid | Reinforces oxide layer |
| Limitation to check | Chloride and pitting | Confirm grade 316L |
Against GFS and FBE coated steel, an SUS304 bolted tank wins on product purity and cleanability for sensitive wastewater, at higher cost. Use the table to match the material to chloride level, hygiene need, and required life.
| Criterion | GFS bolted tank | Welded steel tank | Concrete tank | FRP tank |
|---|---|---|---|---|
| Corrosion defense | Vitreous enamel, inert | Coating-dependent | Good but porous | Liner-dependent |
| Construction | Bolted, fast on site | Welded, slower | Cast in place | Molded / shop |
| Capacity ceiling | Up to 60,000 m3 | Up to 150,000 m3 | Very large | Limited (<5,000 m3) |
| Design life | 30-50 years | 30-50 years | 40-60 years | 20-30 years |
| Best fit | Corrosive, modular | Very large, generic | Heavy civil works | Small, neat chemical |
Send the effluent datasheet with chloride level, require mill certificates, passivation records, and the EN 1090 calculation. Shijiazhuang Zhengzhong Technology Co., Ltd. (Center Enamel) issues drawings, NDE records, and inspection packages per tank so the stainless build is auditable from factory to site.
An SUS304 bolted wastewater tank is a grade and hygiene decision first. Confirm the chloride level, require mill and passivation records, and the stainless vessel performs cleanly for 30-50 years.
A stainless steel vessel of grade SUS304, bolted with A4-80 fasteners, for hygienic wastewater storage of 20-5,000 m3 and a 30-50 year life.
Where chlorides are high or pitting is a risk, grade 316L is specified; 304 suits low-chloride, mild-chemical streams.
The shell is built to EN 1090 and calculated to AWWA D103-09, with plant control under ISO 9001 and ISO 45001.
Mill certificates, citric-acid passivation records, and NDE are issued per tank; bolts are A4-80 stainless.
Stainless wins on purity and cleanability for food and pharma; GFS wins on cost for general corrosive effluent.
Yes. Grade, wall, roof, nozzles, and finish are engineered per effluent, with drawings issued per tank.
Company Details
Business Type:
Manufacturer
Year Established:
1989
Employee Number:
500~600
Ecer Certification:
Verified Supplier
Shijiazhuang Zhengzhong Technology Co.,Ltd is a professional manufacturer dedicated to the design and fabrication of bolted storage tanks since 2008. Our products range includes Glass-Fused-to-Steel (GFS) tanks, fusion bonded epoxy tanks, stainless steel tanks, galvanized steel tanks a... Shijiazhuang Zhengzhong Technology Co.,Ltd is a professional manufacturer dedicated to the design and fabrication of bolted storage tanks since 2008. Our products range includes Glass-Fused-to-Steel (GFS) tanks, fusion bonded epoxy tanks, stainless steel tanks, galvanized steel tanks a...
Get in touch with us
Leave a Message, we will call you back quickly!