Xinxiang SIMO Blower Co., Ltd.
| Payment Terms | T/T, L/C, Payment Term Is Negotiable |
| Supply Ability | 500 Sets Per Month |
| Delivery Time | 15-35 Days |
| Packaging Details | Export Wooden Case Packing, Steel pallet Packing |
| Motor | SIEMENS/ABB/By your demand |
| Voltage | 380V/415V/440V/660V/6KV/10KV |
| Main shaft | High-strength carbon structural steel |
| Drivetrain | Direct/Coupling Driven/V-belt Driven |
| Lubrication | Oil bath lubrication |
| Color | Customer's Requirement |
| Brand Name | SIMO |
| Model Number | SIMO Blower 5-06 |
| Certification | CE, ISO9001:2008,TUV |
| Place of Origin | Henan China |
View Detail Information
Explore similar products
Long Lifetime Industrial Centrifugal Fans High Temperature Materials Cooling
Coupling Driving Industrial Centrifugal Fans Materials Delivery Of Industrial
Backward Industrial Centrifugal Fans Forced Draft Blower CE ISO
Electric Backward Curved Blower For Calcining Kilns
Product Specification
| Payment Terms | T/T, L/C, Payment Term Is Negotiable | Supply Ability | 500 Sets Per Month |
| Delivery Time | 15-35 Days | Packaging Details | Export Wooden Case Packing, Steel pallet Packing |
| Motor | SIEMENS/ABB/By your demand | Voltage | 380V/415V/440V/660V/6KV/10KV |
| Main shaft | High-strength carbon structural steel | Drivetrain | Direct/Coupling Driven/V-belt Driven |
| Lubrication | Oil bath lubrication | Color | Customer's Requirement |
| Brand Name | SIMO | Model Number | SIMO Blower 5-06 |
| Certification | CE, ISO9001:2008,TUV | Place of Origin | Henan China |
| High Light | 380V Industrial Centrifugal Fans ，Heat Dissipation Industrial Centrifugal Fans ，SIEMENS Motor Industrial Centrifugal Fans | ||
Industrial Heavy Duty Heat Dissipation Industrial Centrifugal Fans
Introduction
This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles.
It can be used for more than four years when the concentration of impurities is less than 200 mg/m3.
If it contains a lot of impurities, it also can be used, but it will shorten the service life.
The maximum operating temperature of the induced draft fan must not exceed 250°C.
Technical data
| series | model | Rotation Speed (r/min) |
Total Pressure (Pa) |
Air Capacity (m³/h) |
Power (kW) |
| 5-06 | 8D | 1450 | 2592～1989 | 12028～20607 | 15 |
| 10D | 1450 | 4051～3108 | 23493～40249 | 55 | |
| 11D | 1450 | 3036～2329 | 31269～53571 | 55 | |
| 12.4D | 1450 | 3858～2960 | 44792～76740 | 90 |
Advantages and Features
1. Impeller:
12 pieces of backward aerofoil blades are welded between the Arc cone front plate and the flat shaped rear plate. Because of the use of airfoil blades, the fan is guaranteed to have high efficiency, low noise and high strength. The impeller is corrected by static and dynamic balance, so the operation is stable. Forced draught fan and induced draught fan of the same machine number have same impeller structure.
2. Casing:
The casing is a volute welded by ordinary steel plates.
The casing of a single suction fan is made in three different forms: The No. 8 to 12 casing is made into an integral structure and cannot be disassembled; The No. 14 to 16 casing is made into a two open structure; The No. 18~29.5 casing is made into a three open structure.
The induced draft fan and the volute plate are appropriately thickened to prevent wear.
3. Inlet:
The converging and streamlined air inlet is made into a unitary structure and bolted to the inlet side of the fan.
4. Adjustment door:
A device for regulating the flow of the fan, axially mounted in front of the air inlet. The adjustment range is from 0° (full open) to 90°(fully closed).
5. Transmission parts:
The main shaft of the transmission part is made of high-quality steel, and the 5-51 series of fans are all made of roller bearings.
The bearing housing is available in two forms: No. 8 ~ 16 uses a whole cylindrical bearing housing;
Company Details
Business Type:
Manufacturer
Year Established:
1955
Total Annual:
3500000-25000000$
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Xinxiang SIMO Blower Co., Ltd which was founded in 1955,with a registered capital of RMB50,000,000. mainly designs and manufactures Centrifugal fans and Axial flow fans which are applied to industrial systems, which is the senior member of China General Machinery Industry Association ... Xinxiang SIMO Blower Co., Ltd which was founded in 1955,with a registered capital of RMB50,000,000. mainly designs and manufactures Centrifugal fans and Axial flow fans which are applied to industrial systems, which is the senior member of China General Machinery Industry Association ...
Get in touch with us
Leave a Message, we will call you back quickly!