Loudi Antaeus Electronic Ceramic Co.,Ltd.
| Payment Terms | T/T or Negotiation |
| Supply Ability | Full Supply |
| Delivery Time | 15-45 days |
| Packaging Details | Inner vacuum packaging, outside carton. |
| Chemical ingredients | Al2O3 |
| Max. Use Temp. | 1650℃ |
| Bulk Density | 3.6g/cm3-3.9g/cm3 |
| Water absorption | 0% |
| ROHS Hardness | ≥85 |
| Flexural strength | 358(52) - 550 Mpa(psix10^3) |
| Compressive Strength | 2068(300) - 2600(377) Mpa(psix10^3) |
| Coefficient of thermal expansion | 7.6 - 8.2 / 1X10^-6/℃ |
| Coefficient of thermal conductivity | 16-30.4 / W/m.K |
| Thermal Shock Resistance | 250℃ |
| Dielectricity constant | 9-9.7 / 1MHz.25℃ |
| Dielectric strength | 8.3(210) - 8.7(220) / ac-kV/mm(ac V/mil) |
| Volume Resistivity | >10^13 ohm-cm |
| Brand Name | Antaeus |
| Model Number | AD-K041 |
| Certification | / |
| Place of Origin | Hunan,China |
View Detail Information
Explore similar products
High Hardness Alumina Ceramic Insulator HVDC Relay Case
95% Alumina Ceramic Electronic Components 3.6-3.9g/Cm3 For EV Relay Parts
Purple Advanced Ceramic Housing Material Abrasion Resistant For Electric Vehicle
EV HVDC Relay Ceramic Housing International Technical Ceramics IATF16949
Product Specification
| Payment Terms | T/T or Negotiation | Supply Ability | Full Supply |
| Delivery Time | 15-45 days | Packaging Details | Inner vacuum packaging, outside carton. |
| Chemical ingredients | Al2O3 | Max. Use Temp. | 1650℃ |
| Bulk Density | 3.6g/cm3-3.9g/cm3 | Water absorption | 0% |
| ROHS Hardness | ≥85 | Flexural strength | 358(52) - 550 Mpa(psix10^3) |
| Compressive Strength | 2068(300) - 2600(377) Mpa(psix10^3) | Coefficient of thermal expansion | 7.6 - 8.2 / 1X10^-6/℃ |
| Coefficient of thermal conductivity | 16-30.4 / W/m.K | Thermal Shock Resistance | 250℃ |
| Dielectricity constant | 9-9.7 / 1MHz.25℃ | Dielectric strength | 8.3(210) - 8.7(220) / ac-kV/mm(ac V/mil) |
| Volume Resistivity | >10^13 ohm-cm | Brand Name | Antaeus |
| Model Number | AD-K041 | Certification | / |
| Place of Origin | Hunan,China | ||
| High Light | EV HVDC Relay Ceramic Housing ，IATF16949 Certified Ceramic Housing ，3.6g/cm3 Ceramic Shells | ||
1. Description:
An economizer coil usually used in a contactor is a high resistance low current coil. The purpose of the coil is to cut-in hold the contacts closed, after high current transfers the contacts by the pull-in coil, dropping the coil heat and current, while the contactor is still energized. An alternative method of pulse width modulation (PWM) can be used for economizing. The PWM may be used in ground applications and is normally not used in applications with critical flight or high reliability as it may generate EMI problems with sensitive equipment. In this case, the economized coil is a power saver in regards to holding the current.
2. Feature Advantages:
1) Good advanced ceramic materials
2) High welding sealing performance
3) High hardness and high density
4) Low thermal conductivity
5) Chemical inertness
6) Lower medium spoilage
3. Material Features / Properties:
| Color | White or Ivory | White or Ivory | White or Ivory | |
| Density | g/cm 3 | 3.82 | 3.9 | 3.92 |
| Hardness | HRA | 83 | 85 | 85 |
| Flexural Strength | Mpa (psi*10 3 ) | 375 | 386 | 381 |
4. Technical Parameters:
| Technical Parameters of Ceramics | ||||||||
| Items | Test Conditions | Unit or Symbol | 99% AL2O3 | 95% AL2O3 | 90% AL2O3 | Zirconia | Steatite | Silicon Carbide |
| Volume Density | -- | g/cm3 | ≥3.70 | ≥3.62 | ≥3.40 | ≥5.90 | ≥2.60 | ≥3.08 |
| Tightness | -- | Pa·m³/s | ≤1.0×10-11 | ≤1.0×10-11 | ≤1.0×10-11 | - | - | - |
| Liquid Permeability | -- | -- | Pass | Pass | Pass | Pass | - | |
| Flexural Strength | - | MPa | ≥300 | ≥280 | ≥230 | ≥1100 | ≥120 | ≥400 |
| Elastic Modulus | - | GPa | - | ≥280 | ≥250 | ≥220 | - | 400 |
| Poisson Ratio | - | - | - | 0.20～0.25 | 0.20～0.25 | - | - | - |
| Thermal Shock Resistance | 800℃( Room Temperature) Cycle: 10 times | Pass | Pass | Pass | - | - | - | |
| Coefficient of Linear Expansion | 20℃～100℃ | ×10-6 K-1 | - | - | - | ≤8 | - | |
| 20℃～500℃ | ×10-6 K-1 | 6.5～7.5 | 6.5～7.5 | 6.5～7.5 | 6.5～11.2 | - | - | |
| 20℃～800℃ | ×10-6 K-1 | 6.5～8.0 | 6.5～8.0 | 6.3～7.3 | - | 4 | ||
| 20℃～1200℃ | ×10-6 K-1 | - | 7.0～8.5 | - | - | - | - | |
| Coefficient of Thermal Conductivity | 20℃ | W/(m·k) | - | - | - | - | - | 90～110 |
| 1000℃ | ||||||||
| Dielectric Constant | 1MHz 20℃ | - | 9.0～10.5 | 9.0～10 | 9.0～10 | - | ≤7.5 | - |
| 1MHz 50℃ | - | - | 9.0～10 | - | - | - | - | |
| 10GHz 20℃ | - | 9.0～10.5 | 9.0～10 | 9.0～10 | - | - | - | |
| Volume Resistivity | 100℃ | Ω·cm | ≥1.0×1013 | ≥1.0×1013 | ≥1.0×1013 | - | ≥1.0×1012 | - |
| 300℃ | ≥1.0×1013 | ≥1.0×1010 | ≥1.0×1013 | - | - | - | ||
| 500℃ | ≥1.0×109 | ≥1.0×108 | -- | - | - | - | ||
| Disruptive Strength | D.C | kV/mm | ≥17 | ≥15 | ≥15 | - | ≥20 | - |
| Chemical Durability | 1:9HCl | mg/c㎡ | ≤0.7 | ≤7.0 | - | - | - | - |
| 10%NaOH | mg/c㎡ | ≤0.1 | ≤0.2 | - | -- | - | - | |
| Grain Size | - | μm | - | 3~12 | - | - | - | - |
5. Process Flows:
Formulating --- Granulating --- Forming --- Sintering --- Grinding --- Inspecting --- Packing
6. Application Fields:
New energy vehicles, charging piles, solar power generation, energy storage and power storage system, electric vehicle power system and so on.
7. Production Facilities: Prilling Tower , Forming Machine , High Temperature Sintering Kiln
8. Detection Devices:
Electric Performance Tester , Film Thickness Analyzer , Granulometer , Helium Mass Spectrometer Leak Detector , Universal Pull Force Meter
9. Order Flow Steps as belows: Inquiry ---Quotation --- Place an order --- Production --- Delivery
10. Our advantages: Quality Assurance ; Price Competitive ; Factory Supply Directly ; Good Service
11. Shipping and Package:
12. Our aimed market:
Notes:Above information only for reference and please contact with us for more details freely when you have any inquiry!
Company Details
Business Type:
Manufacturer
Year Established:
2004
Total Annual:
3500000-5000000
Employee Number:
400~600
Ecer Certification：
Verified Supplier
Antaeus was established in 2004 and it is a state-level-high tech enterprise which integrates production and sales of advanced ceramics,new energy automotive ceramic parts,smart sensor ceramics,electronic information ceramics,rail transit,military and aerospace cera... Antaeus was established in 2004 and it is a state-level-high tech enterprise which integrates production and sales of advanced ceramics,new energy automotive ceramic parts,smart sensor ceramics,electronic information ceramics,rail transit,military and aerospace cera...
Get in touch with us
Leave a Message, we will call you back quickly!