China Changsha Fine-Tech Ceramic Co., Ltd.
| Packaging Details | 25kg/barrel, 25kg/bag, 1t/pallet |
| Delivery Time | 5-15 work days |
| Payment Terms | L/C, T/T |
| Supply Ability | 2000t per year |
| Material | Ceramic |
| Equipment Wear | Low |
| Efficiency | High |
| Reusability | Low |
| Glass Phase | 32% |
| Abrasive Strength | High |
| Brand Name | Fine-tech |
| Model Number | B205 |
| Place of Origin | Changsha China |
| Certification | ISO9001 |
View Detail Information
Explore similar products
High Strength and Durable Media Blasting Booth for Efficient Cleaning
Ceramic Blasting Abrasive 0-125μM Deburring Ceramic Media for Polishing
High Gloss Ceramic Blasting Media Ball B170 3.86g/Cm3 Density
Pretreatment Ceramic Blasting Abrasive B10 850μM-1180μM Sand Blasting Abrasive
Product Specification
| Packaging Details | 25kg/barrel, 25kg/bag, 1t/pallet | Delivery Time | 5-15 work days |
| Payment Terms | L/C, T/T | Supply Ability | 2000t per year |
| Material | Ceramic | Equipment Wear | Low |
| Efficiency | High | Reusability | Low |
| Glass Phase | 32% | Abrasive Strength | High |
| Brand Name | Fine-tech | Model Number | B205 |
| Place of Origin | Changsha China | Certification | ISO9001 |
| High Light | High Abrasive Strength Sandblasting Media ，Ceramic Sandblasting Media ，Sandblasting Ceramic Abrasive Grits | ||
Sandblasting with ceramic beads can produce a uniform and uneven rough surface on the cleaned surface to facilitate mechanical bonding of the coating. Using clean compressed air to drive clean ceramic sand to spray on the surface of the workpiece can generate compressive stress on the surface of the substrate, remove the surface oxide film, and cause lattice distortion of part of the surface metal, which is conducive to the physical bonding of the coating. The substrate metal can be sandblasted to obtain a clean, rough and highly reactive surface. This is an important preprocessing method.
The quality of the pre-treatment of the sandblasting process affects the adhesion, appearance, moisture resistance and corrosion resistance of the coating. If the pretreatment work is not done well, the rust will continue to spread under the coating, causing the coating to fall off in pieces.
1). Ceramic sand has a specific microstructure composed of crystallized zirconia (ZrO2) embedded in a glass matrix.
①.High hardness which can effectively transfer the energy of impact point.
②. High toughness to ensure the stability of the medium through hundreds of sandblasting cycles.
③. Does not contaminate the treated surface.
④.Very little dust is produced to ensure production efficiency and limit reduce tear on the sandblasting equipment.
2). Production uses a controlled process and rigorous quality control using advanced technologies such as particle size laser diffraction and morphological image inspection.
①Because of the spherical and smooth surface of ceramic sand which does not damage the workpiece.With the help of good elasticity, ceramic sand can bounce back from multiple angles in the process of sandblasting, which is very suitable for (metal, plastic) structure complex workpiece, at the same time it has the effect of eliminating stress, improve the service life of the workpiece.
②The breakage rate ceramic sand is low, which can effectively reduce the number of reloading, reduce the cost of materials and workers, so the relative use cost is low and it is cost-effective. Compared with the glass sand, the surface finish is higher and the service life is improved by about 20-30 times. Producing less dust, the working environment is cleaner and environmentally friendly, no potential silicosis, which is beneficial to the health of employees.
③The size distribution of ceramic sand is uniform, and it has no porosity , high toughness, hardness, and impact resistance. High particle density can achieve the sandblasting strength of glass beads at a faster grinding speed. The elastic modulus of ceramic projectile is 330GPa, much higher than that of glass bead 60GPa, and the impact energy is large. To achieve the same shot peening effect in use can reduce the shot peening pressure, high shot peening efficiency, reduce energy consumption, thus reducing production costs.
Company Details
Business Type:
Importer,Exporter,Seller
Year Established:
2009
Total Annual:
5000000-6000000
Employee Number:
150~200
Ecer Certification：
Verified Supplier
China Changsha Fine-Tech Ceramic Co., Ltd. was established in 2009 as an associated company of Furthertrading GmbH in China, which has been working in the new material industry for more than 30 years and is committed to providing quality material supply and solutions to customers worldwide. With the... China Changsha Fine-Tech Ceramic Co., Ltd. was established in 2009 as an associated company of Furthertrading GmbH in China, which has been working in the new material industry for more than 30 years and is committed to providing quality material supply and solutions to customers worldwide. With the...
Get in touch with us
Leave a Message, we will call you back quickly!