Shaanxi Kairuihongxing Electronic Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union |
| Supply Ability | 5000 Set/Week |
| Delivery Time | 5-8 Days |
| Packaging Details | Ozone Generator are packed in carton, 10 boxes to one carton. |
| Ozone Output | 50mg |
| Voltage | 12V |
| Keyword | Ozone Air Sterilizer |
| Lifspan | 7000-8000 hours |
| Power Source | electrical |
| Application | Mini ozone machine, Mini Ozone Air Purifier |
| Size of ozone plate | 25*10*0.635mm |
| Brand Name | KRHX |
| Model Number | KR-OZG-0.05G |
| Certification | CE, ROSH approved |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
CE ROSH zone Generator Replacement Plates Double Integrated Ceramic Ozone Plates
10g Ceramic Ozone Generator Accessories Corona Discharge For Hotel / Garage
10g/hr Ceramic Ozone Generator 50W With Integrated Plate / Fan
AC 220V 15g/hr Ceramic Ozone Plate For Ozone Disinfection Machine
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union | Supply Ability | 5000 Set/Week |
| Delivery Time | 5-8 Days | Packaging Details | Ozone Generator are packed in carton, 10 boxes to one carton. |
| Ozone Output | 50mg | Voltage | 12V |
| Keyword | Ozone Air Sterilizer | Lifspan | 7000-8000 hours |
| Power Source | electrical | Application | Mini ozone machine, Mini Ozone Air Purifier |
| Size of ozone plate | 25*10*0.635mm | Brand Name | KRHX |
| Model Number | KR-OZG-0.05G | Certification | CE, ROSH approved |
| Place of Origin | CHINA | ||
| High Light | 500mg/H Ceramic Ozone Generator ，ROSH Ceramic Ozone Generator ，500mg Ozone Generator | ||
50 mg/H Ozone Plate Ceramic Plates For O3 Generator Kit Ozonizer Air Purifier Parts
Features
1. High-voltage and high-frequency corona discharge, small size transformer, low consumption rate of electricity.
2. Epoxy potting, Damp proof, Waterproof, Corrosion proof transformer.
3. Easy to maintain and install.
4. Long-life ceramic plates are made through green production on 96% aluminum oxide ceramics, with silk-screen discharge resistance of tungsten and molybdenum and other agents, flattened and tin-treated on electrodes after co-firing to high temperature 1650 ℃. High temperature co-firing electrodes and circuits never fall off, and are with excellent moisture and oxidation resistance.
Technical parameter
| Item | 50 mg/H Ozone Plate Ceramic Plates For O3 Generator Kit Ozonizer Air Purifier Parts |
| Ozone output | 50mg/hr |
| Size of ozone plate | 25*10*0.635mm |
| Size of ozone transformer | 60mm*25mm*21mm |
| Input voltage | 12VAC |
| Output high voltage | 3.0~3.5KV 16KHz |
| Power | 3W |
| Generating Method | Corona Discharge |
| Application | Car, RV, Outdoor, Hotel, Garage, Commercial, Household |
| Weight | 0.2KG |
Test conditions:
1. Feed Gas: Dry air or oxygen source recommendated
2. Ambient temperature: ≤10℃, Humidity: <10% (Different temperature and humidity in the environment will affect the ozone output and concentration.)
Application
It is used in household air purifier, air fresher, home air purifier, Dryer, dishwasher, shoe cabinet, household disinfectant cabinet, oxygen bar, dehumidifier, refrigerator, domestic appliance and so on.
Attention must be paid to the following:
1 Cooling method: Air cooling for transformer and ceramic plate.
2 When ozone generators work, it is necessary to have cooling fans to blow the ceramic plates and ozone power supplies. When installing the power supply, please make sure there is 2-3cm high space between its bottom and the fixed board, so that heat on the bottom of the power supply can be radiated quickly.
3 This is a high voltage product. Do not touch it when it is working.
4 Usually after ozone sterilization, it needs 20-30 minutes to diffuse ozone before anyone enters. And only when the ozone concentration is or below 0.15ppm, it is permitted to enter.
5 The ozone output test data is based on 95% pure oxygen feeding and dew point -45°. Different temperature and humidity in the environment will affect the ozone output and concentration.
6 This item can work continuously for 20~30 minutes with air cooling. If it continues to work without any rest, the ozone output will decrease by degrees because ceramic plates are overheated.
7 When two high voltage wires are very close to each other, especially under moist circumstances or they touch, the wires will make a light and possibly lead that the insulation becomes discoloured even melts. The way to avoid this matter is to keep the two high voltage wires parallel or separate, at least untouched.
8 Usually when ozone generator is used for test, it will be better if the interval time between two tests is one minute. It is because the output voltage and start-up electric current is very very high, if it is started up and closed down frequently within several minutes, power supply is possible to be burned due to instant or instantaneous high current.
9 Deoxidized materials or objects should not be contacted with ozone for a long time.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Seller
Year Established:
2007
Total Annual:
8000000-10000000
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Shaanxi Kairui Hongxing Electronic Co., Ltd. is a professional manufacturer of industrial ceramic heating element. Since 2007, Kairui focused on the development and production of various types of ceramic igniter and ozone generator application components. ... Shaanxi Kairui Hongxing Electronic Co., Ltd. is a professional manufacturer of industrial ceramic heating element. Since 2007, Kairui focused on the development and production of various types of ceramic igniter and ozone generator application components. ...
Get in touch with us
Leave a Message, we will call you back quickly!