PVC Coated Or Galvanized Rolltop Weld BRC Fencing Mesh Panel 2.4m High

Product Specification

PVC Coated Or Galvanized Rolltop Weld BRC Fencing Mesh Panel with 2.4m High For Factory

BRC Fencing Description:

BRC Fense also know as Euro fence ,also someone call it as Anchor link Fence.

The unique top and bottom “rolled” edges is not just decorative in appearance but give individual panel maximum rigidity and act as horizontal support between posts. Also, the uniform spacing enhances the aesthetics of the fence and provides good through visibility even during the night. Therefore, it is ideal security fencing.

BRC Fencing Introduction:

•  

  Post

  The posts for BRC fence, roll top fencing panels are manufactured from hot dip galvanized 60 x 60 x 2.0mm or 60×80mm( others are available) square hollow steel section and are available from stock to suit fence heights of 1.2m or 2.4m. Longer posts for higher fences can be supplied. Panels are secured to the posts with steel clips and 6.0mm galvanized security fixings screwed into threaded inserts in the posts. All posts are supplied with protective plastic end caps.

  POST-Round profile

  Mesh	Wire Thickness	Surface Treatment	Holes	Height
  48mm 60mm	1.50mm 2.00mm 2.50mm	galvanized and electrostatic polyester powder coated or hot dipped galvanized	with several holes drilled on itself	according to the panel height

   

  Gates

  Swing gates are available to suit standard height in single and double leaf configuration with a twin wire welded mesh in-fill to match the your Roll top fence. Special sized swing gates or sliding gates can be manufactured to suit individual customer requirements.

   

  Fittings:
  Use metal clips, the desigh as follows:

   

   

  Parts:

  Standard Q195 or Q235 Low Carbon Steel Wire,Welded Pipe, pillars,etc.

  Structure of Roll Top Fencing Welded Mesh:

  Shaped by hydraulic pressure with welded high-strengthed cool-drawn low carbon steel wire and fixed with joint Accessories and steel pipe pillars.

   

BRC Fencing Specification:

Wire Dia:3mm-6mm

Hole Size:5x20cm,5x15cm 5x10cm and so on.

Surface Treament:Pvc Coated,Powder Coated,Hot Dipped Galvanized,Pvc Coated &Galvanized,Powder Coated &Galvanized

Panel Height:1.2-2.4m

Panel Length:1.5-3.0m

BRC Fencing Feature:

1. Height: the height of the BRC fence panel.

2. Width: the distance between two BRC fence posts, measure from center to center.

3. Wire Thickness: diameter of the wire of BRC fence.

4. Mesh Size: the size of the BRC fence panel mesh, normally is 150mm*50mm.

5. Metal V Clamp: a “V” shape clamp for connecting the panel with post, normally the material is metal.

6. Hot Dipped Galvanized: dip the fence in to a container that is full of liquid zinc, to prevent the BRC fence from getting rusty.

7. Electric Galvanized + Polyester Powder Coated: electric galvanized (zinc coating 8~12g) as a pre – surface treatment inside, polyester powder layer outside, to prevent the BRC fence from getting rusty.

BRC Fencing Packaging:

Panel & Post wrapped with plastic film and pallet packing, clips, screws and nuts wrapped with carton packing.

BRC Fencing Application:

• Military sites and government facilities.

• Electricity distribution sites.

• Airports, railways, roadways.

• Seaports.

• Fencing & intrusion detection projects.

• Hydel power project.

• Petroleum and chemical facilities.

• Wildlife sanctuaries.

• Warehousing facilities,

• ​​

•