OYIFLOC Water Treatment Chemicals of Anionic, Cationic and Nonionic Polyacrylami

Advantage of OYIFLOC Cationic Flocculant in Organic Wastewater Treatment

General Instruction:

• Anionic polyacrylamide
  Anionic polyacrylamide series products are water-soluble linear high molecular weight polymers synthesized with high polymerization degree. They are easily soluble in water and almost insoluble in general organic solvents such as benzene,esters, etc. It combines valuable properties such as flocculants, thickening shear properties, drag reduction properties, and dispersibility.
• Cationic polyacrylamide
  Cationic polyacrylamide system products are linear high molecular weight polymers formed by copolymerization of cationic units(DM, DMC, CPFFDAAC, DMAEMA, etc.) and acrylamide, followed by granulation, drying, and crushing. It has functions such as decolorization, adsorption, turbidity removal, adhesion, and sludge dewatering.
• Nonionic Polyacrylamide
  Nonionic Polyacrylamide is a type of Polyacrylamide. The degree of hydrolysis is between 0 and 5. And it is mainly used for oil well fluid, and acidic waste water treatment.

Application fields:

• Raw Water Treatment: Flocculation & Clarification
• Industrial Waste Water Treatment: Primary Clarification; Secondary & Tertiary Treatment; Sludge Thickening & Dewatering; Dissolved Air Floatation
• Sewage Treatment: Primary Treatment; Sludge Thickening & Dewatering
• Process Industries : Paper Making: Retention, Resident Agent & Water Recovery; Thermal Power: Clarification of Scrubber Water; Mining & Metallurgy: Tailings Thickening and Water Recovery; Coal: Tailings Thickening and Water Recovery
• Petroleum and Gas Field: Drilling fluids, EOR, Fluid loss control, Lubrication, Shale Stabilization

Advantages of OYIFLOC Polyacrylamide FLocculant

1. Excellent flocculation effect ,quick sedimentation and economical low dosage levels.
2. High level of water clarification after process.
3. Good compatibility with inorganic coagulant.
4. Reduction in sludge of dewatering process system.

Technical Specifications

Solution making of cationic polyacrylamide

1. Before using,dissolve polyacrylamide with tap water at a ratio of 0.1%-0.5% and stir until fully dissolved.
2. Do not use iron materials to stir or hold PAM, because the reaction performance of PAM will decrease when it encounters iron.
3. The dosage needs to be calculated through laboratory pilot tests, with the aim of achieving the aggregation of flocs and presenting the phenomenon of sludge-water separation.
4. It is better to use up the prepared PAM solution within 24 hours.
5. Products should be stored in unopened package in a dry atmosphere at temperature no higher than 35℃.

Why choose US?

• Pre-Sales and After-Sales Service
  We accompany our clientele on their journey with a robust pre-sales and after-sales team, ensuring a comprehensive service experience. Our commitment to excellence is reflected in bespoke water purification solutions, crafted to meet the unique needs of each customer. Our expert team offers unparalleled technical guidance and steadfast after-sales support. Equipped with cutting-edge production technologies and meticulous processes, we enforce stringent quality control from raw material selection to the final product dispatch. Each phase undergoes rigorous testing to guarantee our products' unrivaled efficiency and reliability, underscoring our pledge to quality and customer satisfaction.