Beijing Holland Trading Co., LTD
| Packaging Details | Main press and spare parts |
| Delivery Time | discuss in letter |
| Payment Terms | FOB, CIF, CFR etc. |
| Supply Ability | production line |
| Place of Origin | China |
| Certification | GOST, CE etc. |
View Detail Information
Explore similar products
Aluminum Extrusion Machine Furnace Aluminium Extrusion Manufacturer
Shearing Machine Sheet Cutting Bundling Straightening Aluminum Extrusion Machine
Hot / Cold Rolling Milling Equipment Aluminum Extrusion Machine
Aluminum Billet Continuous Casting Machine Aluminum Extrusion Machine
Product Specification
| Packaging Details | Main press and spare parts | Delivery Time | discuss in letter |
| Payment Terms | FOB, CIF, CFR etc. | Supply Ability | production line |
| Place of Origin | China | Certification | GOST, CE etc. |
| High Light | aluminium extruded section ，aluminium extrusion machine ，aluminium extrusion manufacturer | ||
Aluminum Cladding Steel Wire Forming Machine Aluminum Extrusion Machine
aluminum cladding steel wire machine
1. REXORTH gydraulic system
2. SIEMENS PLC
3. ENROTRERM DC driver
messenger wire machine
Continuous Extrusion Production Line for Aluminum Clad Steel Wires
1. Aluminum Feedstock
Diameter: 2×F9.5mm
Diameter Tolerance: ±0.2mm
Maximum Yield Stress: 95 Mpa
2. Core Steel Wire
Minimum Diameter: 3 mm
Maximum Diameter 7 mm
Diameter Tolerance: ±1.5%d
Carbon Ratio; 0.6~0.75%
Yield Stress: 1100~1450 MPa
3. Continuous Extrusion Product for Aluminum Clad Steel Wires
Diameter: 3.6-8.1 mm
Diameter Tolerance ±1.5% d
Minimum Aluminum Cover Thickness
10% Nominal Radius(20% Conductive Rate)
14% Nominal Radius(27% Conductive Rate)
15% Nominal Radius (30% Conductive Rate)
25% Nominal Radius(40% Conductive Rate)
Conductive Rate 14%-40% complies with the GB/T17937-1999 standard
Highest Production Line Speed: 160m/min
Upper Speed limit: 180m/min
Power : 3 Phase 380V, 1Phase, 220V, 50Hz, 650KVA, note the real load is related to the size and speed of production, general figure is 360kw
Plant Space: L×W×H=50m ×12m×4 m
The Description of Production Line Equipment
1 Introduction of the Continuous Extrusion Production Line for Aluminium Cladding Steel Wire
With the method of tangent mode continuous cladding, the outside surface of treated clean steel wires will be clad by aluminum during extrusion, then get the raw aluminum clad steel wire as product. In next process, by drawing bench we can get the aluminum clad steel wires.
|
1 |
Al pay-off |
2 |
Al straightener |
3 |
Surface cleaning |
4 |
Guide |
5 |
Cleaning units |
|
6 |
Washing |
7 |
Air dry |
8 |
Lubricating |
9 |
Hydraulic |
10 |
Konform |
|
11 |
Cabinet |
12 |
Steel wirepay-off |
13 |
Buffer |
14 |
Cabinet |
15 |
Guide unit |
|
16 |
Steel straightener |
17 |
Guide unit |
18 |
Induction heater |
19 |
Guide unit |
20 |
Spray tube |
|
21 |
Console |
22 |
Cooling system |
23 |
Extend trough |
24 |
Capstan |
28 |
Buffer |
|
29 |
Cabinet |
30 |
Take-up |
31 |
Cleaning unit |
|
|
|
|
Illustrating of Continuous Cladding Production Line Process
Company Details
Business Type:
Trading Company
Year Established:
1997
Total Annual:
> 1,000,000
Ecer Certification：
Active Member
Our company was established in 1997, located in Beijing, China. We are professionally supplying electromechanical equipment made in China, especially in the field of following equipment: metal extrusion presses, EDM wire cutting machines, deep-hole machines, gear machines, milling machines, grind... Our company was established in 1997, located in Beijing, China. We are professionally supplying electromechanical equipment made in China, especially in the field of following equipment: metal extrusion presses, EDM wire cutting machines, deep-hole machines, gear machines, milling machines, grind...
Get in touch with us
Leave a Message, we will call you back quickly!