Anterwell Technology Ltd.
| Payment Terms | T/T, Western Union,PayPal |
| Supply Ability | 6000PCS |
| Delivery Time | 1 Day |
| Packaging Details | please contact me for details |
| Ambient temp. with power applied | 55°C to +125°C |
| VDD | 6.5V |
| All inputs and outputs w.r.t | AVSS –0.3V to VDD+0.3V |
| Current at Input Pins | ±2 mA |
| Current at Output Pins | ..±25 mA |
| Storage temperature | -65°C to +150°C |
| Brand Name | MICROCHIP |
| Model Number | MCP4922-E-SL |
| Certification | Original Factory Pack |
| Place of Origin | Morocco |
View Detail Information
Explore similar products
M27C801-100F1 Programmable IC Chips 8 Mbit 1Mb x 8 UV EPROM and OTP EPROM
145 MHz Fast FET Op Amps optical integrated circuits AD8065WARTZ High Performanc
X24C44SI Serial Nonvolatile Static RAM 16x16 Organization Single 5 Volt Supply
AD9850BRSZ TQFP-64 programmable circuit board , Flash ic integrated circuit CMOS
Product Specification
| Payment Terms | T/T, Western Union,PayPal | Supply Ability | 6000PCS |
| Delivery Time | 1 Day | Packaging Details | please contact me for details |
| Ambient temp. with power applied | 55°C to +125°C | VDD | 6.5V |
| All inputs and outputs w.r.t | AVSS –0.3V to VDD+0.3V | Current at Input Pins | ±2 mA |
| Current at Output Pins | ..±25 mA | Storage temperature | -65°C to +150°C |
| Brand Name | MICROCHIP | Model Number | MCP4922-E-SL |
| Certification | Original Factory Pack | Place of Origin | Morocco |
| High Light | programming ic chips ，programmable audio chip | ||
LSB DNL Integrated Circuit Chip MCP4922-E-SL 12 Bit DAC SPI⑩ Interface
Block Diagram
Features
• 12-Bit Resolution
• ±0.2 LSB DNL (typ)
• ±2 LSB INL (typ)
• Single or Dual Channel
• Rail-to-Rail Output
• SPI™ Interface with 20 MHz Clock Support
• Simultaneous Latching of the Dual DACs w/LDAC
• Fast Settling Time of 4.5 µs
• Selectable Unity or 2x Gain Output
• 450 kHz Multiplier Mode
• External VREF Input
• 2.7V to 5.5V Single-Supply Operation
• Extended Temperature Range: -40°C to +125°C
Applications
• Set Point or Offset Trimming
• Sensor Calibration • Digitally-Controlled Multiplier/Divider
• Portable Instrumentation (Battery-Powered)
• Motor Feedback Loop Control
Description
The Microchip Technology Inc. MCP492X are 2.7 – 5.5V, low-power, low DNL, 12-Bit Digital-to-Analog Converters (DACs) with optional 2x buffered output and SPI interface.
The MCP492X are DACs that provide high accuracy and low noise performance for industrial applications where calibration or compensation of signals (such as temperature, pressure and humidity) are required.
The MCP492X are available in the extended temperature range and PDIP, SOIC, MSOP and TSSOP packages. The MCP492X devices utilize a resistive string architecture, with its inherent advantages of low DNL error, low ratio metric temperature coefficient and fast settling time. These devices are specified over the extended temperature range. The MCP492X include doublebuffered inputs, allowing simultaneous updates using the LDAC pin. These devices also incorporate a Power-On Reset (POR) circuit to ensure reliable power-up.
1.0 ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings †
VDD................................................................................. 6.5V
All inputs and outputs w.r.t ............. AVSS –0.3V to VDD+0.3V
Current at Input Pins ...............................±2 mA
Current at Supply Pins ...............................................±50 mA
Current at Output Pins ...............................................±25 mA
Storage temperature .....................................-65°C to +150°C
Ambient temp. with power applied ................-55°C to +125°C
ESD protection on all pins ........... ≥ 4 kV (HBM), ≥ 400V (MM)
Maximum Junction Temperature (TJ)..........................+150°C
† Notice: Stresses above those listed under “Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.
FIGURE 2-11: MCP4921 IDD vs. Ambient FIGURE 2-14: MCP4922 IDD vs. Ambient Temperature and VDD. Temperature and VDD.
FIGURE 2-12: MCP4921 IDD Histogram (VDD = 2.7V). FIGURE 2-15: MCP4922 IDD Histogram (VDD = 2.7V).
FIGURE 2-13: MCP4921 IDD Histogram (VDD = 5.0V). FIGURE 2-16: MCP4922 IDD Histogram (VDD = 5.0V
Company Details
Business Type:
Distributor/Wholesaler,Trading Company
Year Established:
2004
Total Annual:
500000-1000000
Employee Number:
20~30
Ecer Certification：
Site Member
King--- Originator of ANTERWELL, engaged in the IC electronics industry in 1998 and establish ANTERWELL in 2004. The company is located in Shenzhen Huaqiang North, the largest electronic center in Asia. Our main business is the technical development and ... King--- Originator of ANTERWELL, engaged in the IC electronics industry in 1998 and establish ANTERWELL in 2004. The company is located in Shenzhen Huaqiang North, the largest electronic center in Asia. Our main business is the technical development and ...
Get in touch with us
Leave a Message, we will call you back quickly!