Taconic TLX-9 High Frequency PCB 62mil 1.575mm With Immersion Silver for Mixers,

Product Specification

Introducing TLX-9 High Frequency PCB: Unleashing Unmatched Performance

Welcome, folks! Today, we delve into the extraordinary realm of TLX-9 High Frequency PCBs. These powerhouses of technological prowess are crafted to deliver unrivaled dimensional and electrical performance. So, fasten your seat belts as we take an in-depth look at the remarkable characteristics of TLX-9.

TLX-9 Typical Properties: A Symphony of Excellence

TLX-9 stands tall with a low dielectric constant of 2.5 at 10 GHz, ensuring uncompromised signal integrity and making it the ultimate choice for high-frequency applications. Its dissipation factor is impressively low as well, boasting a mere 0.0019 at the same frequency. These exceptional electrical properties guarantee optimal performance in scenarios where precision matters most.

But wait, there's more! TLX-9 goes above and beyond by exhibiting a moisture absorption rate of less than 0.02%. This outstanding feature ensures unwavering stability and reliability even in damp environments, leaving no room for compromise.

When it comes to high-voltage applications, TLX-9 shines with a dielectric breakdown voltage of over 60 kV. It fearlessly tackles the challenges posed by demanding voltage requirements, proving its mettle in critical scenarios.

TLX-9 doesn't stop at electrical performance; its insulation properties are equally remarkable. Boasting volume resistivity and surface resistivity exceeding 10^7 Mohm/cm, it provides impeccable electrical insulation. Furthermore, its arc resistance surpasses 180 seconds, showcasing remarkable resilience against electrical arcing.

But that's not all—TLX-9 is a true champion of mechanical strength. With a flexural strength of over 23,000 lbs./in. lengthwise and over 19,000 lbs./in. crosswise, it stands as a paragon of durability. And let's not forget its impressive peel strength of 12 lbs./linear in. for 1 oz. copper. TLX-9 is engineered to endure the toughest challenges.

While thermal conductivity might not be its strongest suit, with a rating of 0.19 W/m/K, TLX-9 still delivers adequate performance in most applications. Just keep in mind the specific heat requirements when dealing with intense thermal conditions.

TLX-9 boasts a CTE (coefficient of thermal expansion) of 9 ppm/°C in the X-direction, 12 ppm/°C in the Y-direction, and 130-145 ppm/°C in the Z-direction. These values should be considered when accounting for temperature changes in your designs.

Last but certainly not least, TLX-9 demonstrates its fire-resistant prowess with a UL-94 flammability rating of V-0. It's a reliable substrate that resists ignition and swiftly self-extinguishes if the need arises. Safety and peace of mind are guaranteed.

Outgassing Properties: Space-Tested Resilience

TLX-9 boasts a space heritage, making it a frontrunner in enduring severe environments such as radiation resistance in space. Extensive outgassing tests have been conducted, and the results are nothing short of impressive. TLX-9 exhibits a total mass loss (TML) of only 0.02% and collected volatile condensable materials (CVCM) of a mere 0.01%. These remarkably low levels far exceed the normal requirements, ensuring unparalleled performance even in the harshest conditions.

PCB Capability (TLX-9): Where Versatility Meets Precision

TLX-9 PCBs offer a wide range of options to cater to your specific needs. Whether you require single-sided boards, double-sided boards, multi-layer boards, or hybrid types, TLX-9 has got you covered. Its versatility knows no bounds.

Thickness is no obstacle for TLX-9 PCBs. Ranging from a sleek 2 mils to a robust 250 mils, these boards can be tailored to your desired specifications. Thin or thick, TLX-9 delivers the goods.

Finished copper on track lines comes in options of 1oz and 2oz, allowing you to fine-tune conductivity as per your requirements.

The maximum PCB size for TLX-9 is an impressive 400mm by 500mm. Whether you opt for a single board or multiple designs on a panel, TLX-9 flexes to accommodate your vision. Customization at its finest!

Aesthetics matter, and TLX-9 PCBs offer a delightful array of solder mask colors. Choose from classic green, sleek black, vibrant blue, fiery red, sunny yellow, and more. Unleash your creativity and add a personal touch to your designs.

When it comes to pad surface finishes, TLX-9 PCBs offer a plethora of options. From immersion gold, HASL, and immersion silver to immersion tin, bare copper, OSP, pure gold, and ENEPIG, the possibilities are vast. Tailor your finishes toTLX-9 PCBs come in a variety of choices to meet your specific preferences.

In Conclusion: TLX-9 PCBs, the Epitome of High-Frequency Excellence

TLX-9 and its PCB variants reign supreme in the realm of RF microwave substrates. With their unparalleled dimensional and electrical performance, they conquer the challenges of harsh environments and provide unwavering support for a myriad of applications. From resisting vibration and high temperatures to withstanding radiation and marine conditions, TLX-9 stands tall. So, if you seek a reliable and high-performance substrate for your next project, look no further than TLX-9.

Thank you for joining us on this journey of technological marvels, and until we meet again!