FOSHAN LIDEXIN MACHINERY MANUFACTURING CO., LTD.
| Payment Terms | T/T, Western Union |
| Supply Ability | 100pcs/mon |
| Delivery Time | 10-15 work days |
| Saw blade aperture | ￠ 10-220mm |
| Tooth surface angle | 5 degrees to+20 degrees |
| Tooth top back angle | 1-20 degrees |
| Negative chamfer grinding | -15 degrees |
| Processing saw blade diameter range | ￠100- ￠800mm |
| Mechanical weight | 700KG |
| Brand Name | Lidexin |
| Model Number | LDX-020A |
| Certification | CU,ISO |
| Place of Origin | Foshan, Guangdong, China |
View Detail Information
Explore similar products
LDX-026A Full CNC Alloy Saw Blade Grinding Machine Manufacturers
LDX-020A Woodworking Saw Blade Automatic TCT Saw Blade Grinding Machine
LDX-028A Saw Blade Diameter 400-1500MM Automatic Alloy Circular Saw Blade
LDX-026A Servo Feed NC TCT Circular Saw Blade Front And Rear Angle Grinding
Product Specification
| Payment Terms | T/T, Western Union | Supply Ability | 100pcs/mon |
| Delivery Time | 10-15 work days | Saw blade aperture | ￠ 10-220mm |
| Tooth surface angle | 5 degrees to+20 degrees | Tooth top back angle | 1-20 degrees |
| Negative chamfer grinding | -15 degrees | Processing saw blade diameter range | ￠100- ￠800mm |
| Mechanical weight | 700KG | Brand Name | Lidexin |
| Model Number | LDX-020A | Certification | CU,ISO |
| Place of Origin | Foshan, Guangdong, China | ||
| High Light | Guangdong Foshan Grinding Machine ，Automatic Saw Blade Grinding Machine ，Angle Grinding Machine | ||
LDX-020A Guangdong Foshan Automatic Saw Blade Before And After Angle Grinding Machine
Do TCT saw blades need a fully automatic grinder:
1,TCT saw blade as an industrial consumable, sawing for a long time, there will be many problems: such as blunt head, cutting is not sharp enough; There are lines and burrs on the surface of the cutting workpiece, and the material loss is larger; The sawing sound is noisy and uneven; The serrations are not sharp causing the cut to be smoky and so on
2,Because the cutting workpiece requirements are relatively high, worried about the quality of the workpiece cut out after the alloy saw blade grinding, so adhere to the principle of only buying new films, saw blades never grinding, which makes the customer's sawing cost is very high; Some customers complained to us that the saw blade had been polished in other manufacturers before.
3,But it is not that your cutting requirements are high, nor is it really bad to use the alloy saw blade after grinding, but you did not find the right manufacturer, this is the key! Alloy saw blade after professional factory grinding, it can be used as a new film, help you reduce the sawing cost by more than 50%!
Automatic alloy saw blade grinding machine how to debug:
1,Check the power supply: Ensure that the power supply voltage connected to the gear grinding machine is consistent with the voltage required by the device, and the power cable is intact.
2,Check the coolant system: Make sure there is enough coolant in the coolant bucket, that the coolant pump is working properly, and that the coolant lines are properly connected.
3,Check the fixture: ensure that the fixture is working properly, can accurately grip the saw blade, and the clamping force is moderate.
4,Check grinding wheel: Check whether the grinding wheel is damaged, whether the installation is firm, and whether the contact surface between the grinding wheel and the flange is smooth.
5,Set saw blade parameters: According to the required blade size and material, set the corresponding blade diameter, blade thickness and tension parameters.
| Technical parameter: |
| Processing saw blade diameter range: ￠100- ￠800mm |
| Saw blade aperture: ￠ 10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-100mm |
| Tooth surface angle: 5 degrees to+20 degrees |
| Tooth top back angle: 1-20 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 20 degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠ 32mmX1mm) |
| Negative chamfer grinding: -15 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 1.85 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 700KG |
| Mechanical dimensions (length x width x height): 1500X1100X1700mm |
| Technical features: |
| 1. This equipment can grind aluminum TCT cutting alloy saw blades and woodworking saw blades. It is easy to operate and can fully extend the service life of TCT saw blades. Each blade can be reused 15-30 times. This equipment has received praise from many buyers. |
Company Details
Business Type:
Manufacturer
Year Established:
2010
Total Annual:
1389000-1500000
Employee Number:
10~15
Ecer Certification：
Verified Supplier
Foshan Lidexin Machinery Manufacturing Co., LTD. - The introduction of Germany's world leading woodworking machinery product technology; Combined with modern advanced woodworking machinery equipment and technology; The product is close to or has reached the level of excellent German woodw... Foshan Lidexin Machinery Manufacturing Co., LTD. - The introduction of Germany's world leading woodworking machinery product technology; Combined with modern advanced woodworking machinery equipment and technology; The product is close to or has reached the level of excellent German woodw...
Get in touch with us
Leave a Message, we will call you back quickly!