Shenzhen ECER Network Technology Co., Ltd.
| Number of Ports | 1 |
| Number of Contacts | 6P |
| Mounting Type | 沉板 |
| Current Rating | 3A |
| Detection color | 黑色 |
| Operating Temperature | -30℃~+85℃ |
| Connector Type | Type-C |
| Connect-Disconnect Life | 5千次 |
| Gender | 母 |
| Description | USB-C (USB TYPE-C) Receptacle Connector 6 Position Recessed Mount |
| Mfr. Part # | TYPE-C 6PFS 4JCB0.55-H8.2 IPX7 |
| Package | SMD |
| Model Number | TYPE-C 6PFS 4JCB0.55-H8.2 IPX7 |
View Detail Information
Explore similar products
Lead Free Connector Amphenol 10119313-301TLF with Thermoplastic Housing and Gold
Micro USB Connector JST UB-MC5BR3-SD204-4S-1-TB with SMT Mounting and 10000
Top Mount Type C Connector 6 Pin Configuration HCTL HC-TYPE-C-6P-01B Suitable
Type C Connector SHOU HAN SH U262 161N 4BVC11 with Electrical Rating 5V 3A and
Product Specification
| Number of Ports | 1 | Number of Contacts | 6P |
| Mounting Type | 沉板 | Current Rating | 3A |
| Detection color | 黑色 | Operating Temperature | -30℃~+85℃ |
| Connector Type | Type-C | Connect-Disconnect Life | 5千次 |
| Gender | 母 | Description | USB-C (USB TYPE-C) Receptacle Connector 6 Position Recessed Mount |
| Mfr. Part # | TYPE-C 6PFS 4JCB0.55-H8.2 IPX7 | Package | SMD |
| Model Number | TYPE-C 6PFS 4JCB0.55-H8.2 IPX7 |
This document details the specifications for the TYPE-C 6PFS 4JCB0.55-H8.2 IPX7 connector, manufactured by Shenzhen Shouhan Technology Co., Ltd. It is designed for applications requiring high reliability, durability, and waterproofness, meeting IPX7 standards. The connector supports a current rating of 3.0A max and a voltage of 100VAC, with a wide operating temperature range of -30~80C.
| Item | Test Conditions | Performance | Specification |
| Mechanical Performance | Connection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 5-20N |
| Disconnection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 8-20N | |
| Electrical Performance | Contact Resistance | Measured at small current (100mA or less) 1000Hz | 40m MAX |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 100M MIN | |
| Dielectric Strength | AC 100V ims(50~60Hz) for 1 min, Trip Current: 0.5mA (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | Without damage to parts, arcing or breakdown etc. | |
| Durability | Solderability Test | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds | (1) Solder wetting time shall be 3 sec or less (2) The area of soldering should be over 75% |
| Resistance to Soldering Heat Test (Reflow Soldering) | Preheat: Temperature on the copper foil surface should reach 180. Tallest Temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 with in 20 seconds. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| Resistance to Soldering Heat Test (Soldering Iron Method) | Bit temperature 3305, Application time of soldering iron 30.5 sec. However excessive pressure shall not be applied to the terminal. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| Life Test (No Load) | Connection and disconnection shall be made with the mating plugs and jacks for 10000 cycles at a speed of 10 to 25 cycles/min. | Mechanical and electrical characteristics shall be satisfied. | |
| Life Test (Load) | At rating condition (non-inductive load), connection and disconnection shall be made 10000 cycles at a speed 10 to 20 cycles/min. | (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied. | |
| Temperature Cycling Test | Subjected to 5 cycles of specified conditions, then returned to room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). | |
| Cold & Heat Shock Test | Subjected to 5 cycles of specified conditions, then returned to room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!