Shenzhen ECER Network Technology Co., Ltd.
| Number of Ports | 1 |
| Number of Contacts | 16P |
| Mounting Type | 卧贴 |
| Current Rating | 5A |
| Voltage Rating | 5V |
| Detection color | 黑色 |
| Operating Temperature | -25℃~+85℃ |
| Connector Type | Type-C |
| Connect-Disconnect Life | 1万次 |
| Gender | 母 |
| Description | USB-C (USB TYPE-C) Receptacle Connector 16 Position Surface Mount, Right Angle |
| Mfr. Part # | TYPE-C16P3MDDGP073 |
| Package | SMD |
| Model Number | TYPE-C16P3MDDGP073 |
View Detail Information
Explore similar products
Lead Free Connector Amphenol 10119313-301TLF with Thermoplastic Housing and Gold
Micro USB Connector JST UB-MC5BR3-SD204-4S-1-TB with SMT Mounting and 10000
Top Mount Type C Connector 6 Pin Configuration HCTL HC-TYPE-C-6P-01B Suitable
Type C Connector SHOU HAN SH U262 161N 4BVC11 with Electrical Rating 5V 3A and
Product Specification
| Number of Ports | 1 | Number of Contacts | 16P |
| Mounting Type | 卧贴 | Current Rating | 5A |
| Voltage Rating | 5V | Detection color | 黑色 |
| Operating Temperature | -25℃~+85℃ | Connector Type | Type-C |
| Connect-Disconnect Life | 1万次 | Gender | 母 |
| Description | USB-C (USB TYPE-C) Receptacle Connector 16 Position Surface Mount, Right Angle | Mfr. Part # | TYPE-C16P3MDDGP073 |
| Package | SMD | Model Number | TYPE-C16P3MDDGP073 |
This document outlines the specifications for the TYPE-C16P3MDDGP073, a Type-C connector developed by Shenzhen Shouhan Technology Co., Ltd. It details the product's ratings, operating conditions, and performance criteria across mechanical, electrical, and durability tests, ensuring reliability and quality for various applications.
| Item | Project | Test Conditions | Performance (Specification) |
|---|---|---|---|
| RATING | (Rating) | DC 5V 3A | |
| (Practical Temperature Range) | -25~85C | -25C~+85C (Use within -25C to +85C) | |
| STANDARD ATMOSPHEIC CONDITIONS | (Test Standard Conditions) | (1) 5~35 (2) 45%~85% (3) 86 Kpa~106Kpa | (1) Temperature: 5C to 35C (2) Humidity: 45% to 85% (3) Pressure: 86 Kpa to 106 Kpa |
| (1) BETWEEN BODY AND CONDUCTOR | 5C TO 35 | ||
| (2) BETWEEN CONDUCTORS NOT TO BE CONTACT | 45% TO 85% | ||
| MECHANICAL () | CONNECTION FORCE () | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES. | 0.5-2.0Kgf |
| DISCONNECTI ON FORCE () | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES. | 0.8~2.0Kgf | |
| ELECTRICAL () | CONTACT RESISTANCE () | MEASURED AT SMALL CURRENT 100m A OR LESS 1000Hz | 40m |
| INSULATION RESISTANCE () | APPLY A VOLTAGE OF 100V DC FOR 1 MIN TO FOLLOWING PORTIONS | 100M | |
| DIELECTRIC STRENGTH () | AC 100V ims(50~60Hz)FOR 1 MIN TRIP CURRENT:0.5mA | WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC | |
| DURABILITY () | SOLDERA- BILITY TEST () | THE TOP OF THE TERMINALS SHALL BE DIPPED 1mm IN THE SOLDER BATH OF 2505 FOR 50.5 SECONDS | (1) SOLDER WETTING TIME SHALL BE 3 SEC OR LESS (2) THE AREA OF SOLDERING SHOULD BE OVER 75% |
| RESISTANCE TO SOLDERING HEAT TEST () | REFLOW SOLDERING CONDITIONS: PREHEAT: 180.120s; TALLEST TEMPERATURE: 2605 WITHIN 20 SECONDS. SOLDERING IRON METHOD: BIT TEMPERATURE 3305, APPLICATION TIME 30.5 SEC | WITHOUT DEFOR MATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |
| HUMIDITY TEST () | THE JACK SHALL BE STORED AT A TEMPERATURE OF 402 AND A HUMIDITY OF 90%TO 96% FOR 96 Hr, THEN RECOVERED AT STANDARD ATMOSPHERIC CONDITION FOR 1 Hr. | ||
| HEAT TEST () | THE JACK SHALL BE STORED AT A TEMPERATURE OF 702 FOR 96 HOURS, THEN RECOVERED AT ROOM TEMPERATURE FOR 1 Hr. | APPEARANCE NO DAMAGE, MECHANICAL AND ELECTRICAL CHARACTERISTICS SATISFIED | |
| COLD TEST () | THE JACK SHALL BE STORED AT A TEMPERATURE OF -253 FOR 96 HOURS, THEN RECOVERED AT ROOM AMBIENT CONDITION FOR 1 Hr. | APPEARANCE NO DAMAGE, MECHANICAL AND ELECTRICAL CHARACTERISTICS SATISFIED | |
| LIFE TEST () | WITHOUT LOAD | CONNECTION AND DISCONNECTION SHALL BE MADE FOR 10000 CYCLES AT A SPEED OF 10 TO 25 CYCLES/MIN | |
| LOAD: AT RATING CONDITION (NON-INDUCTIVE LOAD) | CONNECTION AND DISCONNECTION SHALL BE MADE 10000 CYCLES AT A SPEED 10 TO 20 CYCLES / MIN | (1) CONTACT RESISTANCE SHALL BE 0.1 (2) DISCONNECTION FORCE SHALL BE 0.8 TO 2.0N (3) MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |
| TEMPARATURE CYCLING TEST () | 5 CYCLES OF SPECIFIED CONDITIONS, THEN ROOM AMBIENT FOR 30 MINUTES. | PRODUCT NO DEFORMATION OR CRACKS. INSERTION & EXTRACTION FORCE: 3 TO 20N. CONTACT RESISTANCE: MAX.30M. INSULATION RESISTANCE: MIN.100 M. DIELECTRIC WITHSTANDING VOLTAGE: 100VAC/MIN(BETWEEN TERMINALS) | |
| COLD&HEAT SHOCK TEST () | 5 CYCLES OF SPECIFIED CONDITIONS, THEN ROOM AMBIENT FOR 30 MINUTES. | PRODUCT NO DEFORMATION OR CRACKS. INSERTION & EXTRACTION FORCE: 3 TO 25N. CONTACT RESISTANCE: MAX.30M. INSULATION RESISTANCE: MIN.100 M. DIELECTRIC WITHSTANDING VOLTAGE: 500VAC/MIN(BETWEEN TERMINALS) |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!