Shenzhen ECER Network Technology Co., Ltd.
| Number of Ports | 1 |
| Number of Contacts | 6P |
| Mounting Type | 卧贴 |
| Current Rating | 3A |
| Detection color | 黑色 |
| Operating Temperature | -30℃~+85℃ |
| Connector Type | Type-C |
| Connect-Disconnect Life | 1万次 |
| Gender | 母 |
| Description | USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount, Right Angle |
| Mfr. Part # | USBC-0032IPX8-00 |
| Package | SMD |
| Model Number | USBC-0032IPX8-00 |
View Detail Information
Explore similar products
Lead Free Connector Amphenol 10119313-301TLF with Thermoplastic Housing and Gold
Micro USB Connector JST UB-MC5BR3-SD204-4S-1-TB with SMT Mounting and 10000
Top Mount Type C Connector 6 Pin Configuration HCTL HC-TYPE-C-6P-01B Suitable
Type C Connector SHOU HAN SH U262 161N 4BVC11 with Electrical Rating 5V 3A and
Product Specification
| Number of Ports | 1 | Number of Contacts | 6P |
| Mounting Type | 卧贴 | Current Rating | 3A |
| Detection color | 黑色 | Operating Temperature | -30℃~+85℃ |
| Connector Type | Type-C | Connect-Disconnect Life | 1万次 |
| Gender | 母 | Description | USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount, Right Angle |
| Mfr. Part # | USBC-0032IPX8-00 | Package | SMD |
| Model Number | USBC-0032IPX8-00 |
This specification details the TYPE-C waterproof USB connector (USBC-0032IPX8-00) from SHENZHEN SHOUHAN TECHNOLOGY CO., LTD. Designed for reliable performance in various environmental conditions, it offers robust mechanical and electrical characteristics suitable for demanding applications. The product features a waterproof design (IPX8) and is rated for specific temperature ranges and electrical loads.
| Item | Test Conditions | Performance/Specification |
| MECHANICAL () | ||
| 1. CONNECTION FORCE () | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 5-20N |
| 2. DISCONNECTION FORCE () | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 8~20N |
| 3. TERMINAL STRENGTH () | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical, and mechanical characteristics shall be satisfied. | N/A (Satisfied) |
| ELECTRICAL () | ||
| 3.1 CONTACT RESISTANCE () | Measured at small current (100mA or less) 1000Hz | 40m |
| 3.2 INSULATION RESISTANCE () | Apply a voltage of 100V DC for 1 min to following portions: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 100M |
| 3.3 DIELECTRIC STRENGTH () | AC 100V rms(50~60Hz) for 1 min. Trip current: 0.5mA. Tested between: (1) Body and conductor (2) Conductors not to be contact (3) Conductors not to be when plug is inserted | Without damage to parts, arcing or breakdown etc. |
| RATING () | ||
| AC 250V 3A | ||
| URABILITY () | ||
| 4.1 SOLDERABILITY TEST () | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. | (1) Solder wetting time shall be 3 sec or less (2) The area of soldering should be over 75% |
| 4.2 RESISTANCE TO SOLDERING HEAT TEST () | Reflow Soldering Conditions: Preheat: 180 for 120s. Tallest Temperature: 2605 within 20 seconds. Soldering Iron Method: Bit temperature 3305, application time 30.5 sec. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| 4.3 HUMIDITY TEST () | Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. | Appearance no abnormal, mechanical and electrical characteristics shall be satisfied. |
| 4.4 HEAT TEST () | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 hour. | Appearance no abnormal, mechanical and electrical characteristics shall be satisfied. |
| 4.5 COLD TEST () | Stored at -253 for 96 hours, then subjected to controlled recovery for 1 hour. | Appearance no abnormal, mechanical and electrical characteristics shall be satisfied. |
| 4.6 LIFE TEST () | Without Load: 5000 cycles at 10 to 25 cycles/min. Load: At rating condition (non-inductive load): 5000 cycles at 10 to 20 cycles/min. | (1) Contact resistance 0.1 (2) Disconnection force 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied. |
| 4.7 TEMPERATURE CYCLING TEST () | Subjected to 5 cycles of specified temperature conditions, then allowed to remain in room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| 4.8 COLD & HEAT SHOCK TEST () | Subjected to 5 cycles of specified temperature conditions, then allowed to remain in room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!