Shenzhen ECER Network Technology Co., Ltd.
| length | 10.3mm |
| Number of Ports | 1 |
| Current Rating | 5A |
| Voltage Rating | 5V |
| Detection color | 黑色 |
| Operating Temperature | -55℃~+85℃ |
| Connector Type | Type-C |
| Gender | 母 |
| Connect-Disconnect Life | 1万次 |
| Description | USB-C (USB TYPE-C) Receptacle Connector Surface Mount |
| Mfr. Part # | AUSB0280-P101A |
| Package | SMD |
| Model Number | AUSB0280-P101A |
View Detail Information
Explore similar products
Lead Free Connector Amphenol 10119313-301TLF with Thermoplastic Housing and Gold
Micro USB Connector JST UB-MC5BR3-SD204-4S-1-TB with SMT Mounting and 10000
Top Mount Type C Connector 6 Pin Configuration HCTL HC-TYPE-C-6P-01B Suitable
Type C Connector SHOU HAN SH U262 161N 4BVC11 with Electrical Rating 5V 3A and
Product Specification
| length | 10.3mm | Number of Ports | 1 |
| Current Rating | 5A | Voltage Rating | 5V |
| Detection color | 黑色 | Operating Temperature | -55℃~+85℃ |
| Connector Type | Type-C | Gender | 母 |
| Connect-Disconnect Life | 1万次 | Description | USB-C (USB TYPE-C) Receptacle Connector Surface Mount |
| Mfr. Part # | AUSB0280-P101A | Package | SMD |
| Model Number | AUSB0280-P101A |
This specification sheet details the TYPE-C 24PIN DIP+SMT 6PIN ALT connector from SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD. Designed for robust performance, it operates within a wide temperature range of -55C to +85C and supports a rated power of DC 5V 5A. The connector meets stringent mechanical, electrical, and durability standards, making it suitable for various demanding applications.
| Item | Test Conditions | Performance | Specification |
| RATING | |||
| Power | DC 5V 5A | ||
| Operating Temperature | Within -55C to +85C | -55~85C | |
| STANDARD ATMOSPHERIC CONDITIONS | |||
| Temperature | For measurements and tests | 5C to 35C | |
| Humidity | For measurements and tests | 45% to 85% | |
| Pressure | For measurements and tests | 86Kpa to 106Kpa | |
| MECHANICAL | |||
| Connection Force | After connecting and disconnecting using standard plug gauge 3 times | 5-20N | |
| Disconnection Force | After connecting and disconnecting using standard plug gauge 3 times | 8~20N | |
| Terminal Strength | Static load of 0.1N/m (1kgf/cm) applied to the tip of the terminal for 1 min in any direction. No damage such as cracks, looseness or play. Mechanical and electrical characteristics shall be satisfied. | ||
| ELECTRICAL | |||
| Contact Resistance | Measured at small current (100mA or less) at 1000Hz | MAX | 40m |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to specified portions. | MIN | 100M |
| Dielectric Strength | AC 100V rms (50~60Hz) for 1 min, trip current: 0.5mA. Tested between specified portions. | Without damage to parts, arcing or breakdown etc. | |
| DURABILITY | |||
| Solderability Test | Top of terminals dipped 1mm in solder bath of 2505 for 50.5 seconds. | Solder wetting time | 3 seconds |
| Soldering area | 75% | ||
| Resistance to Soldering Heat Test (Reflow) | Preheat: 180 for 120s. Peak temperature: 2605 within 20 seconds. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 3305, application time 30.5 seconds. No excessive pressure on terminal. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| Humidity Test | Stored at 402 and 90% to 96% humidity for 96 hours, then maintained at standard atmospheric condition for 1 hour. | ||
| Heat Test | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 hour. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| Cold Test | Stored at -253 for 96 hours, then subjected to controlled recovery for 1 hour. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| Life Test | Without Load: 10000 cycles at a speed of 10 to 25 cycles/min. | Contact Resistance | 0.1 |
| Disconnection Force | 0.8 to 2.0N | ||
| Load: At rating condition (non-inductive load): 10000 cycles at a speed of 10 to 20 cycles/min. | Mechanical and Electrical Characteristics | Shall be satisfied. | |
| Temperature Cycling Test | 5 cycles of specified conditions, then allowed to remain in room ambient for 30 minutes. | Molded Part | No deformation or cracks. |
| Insertion & Extraction Force | 3 to 20N | ||
| Contact Resistance | MAX. 30m | ||
| Insulation Resistance | MIN. 100 M | ||
| Dielectric Withstanding Voltage | 100VAC/min (between terminals) | ||
| Cold & Heat Shock Test | 5 cycles of specified conditions, then allowed to remain in room ambient for 30 minutes. | Molded Part | No deformation or cracks. |
| Insertion & Extraction Force | 3 to 25N | ||
| Contact Resistance | MAX. 30m | ||
| Insulation Resistance | MIN. 100 M | ||
| Dielectric Withstanding Voltage | 500VAC/min (between terminals) | ||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!