Hefei Purple Horn E-Commerce Co., Ltd.
| length | 20mm |
| Number of Ports | 1 |
| Supplementary Features | - |
| Number of Contacts | 4P |
| Mounting Type | 卧贴 |
| Center Height | - |
| Current Rating | 1.5A |
| Detection color | 黑色 |
| Voltage Rating | 30V |
| Operating Temperature | -25℃~+85℃ |
| Connector Type | Type-A |
| Connect-Disconnect Life | 3千次 |
| Gender | 公 |
| Description | USB-A (USB TYPE-A) Receptacle Connector 4 Position Surface Mount, Right Angle |
| Mfr. Part # | AM 90°YC |
| Package | SMD |
| Model Number | AM 90°YC |
View Detail Information
Explore similar products
Lead Free Connector Amphenol 10119313-301TLF with Thermoplastic Housing and Gold
Micro USB Connector JST UB-MC5BR3-SD204-4S-1-TB with SMT Mounting and 10000
Top Mount Type C Connector 6 Pin Configuration HCTL HC-TYPE-C-6P-01B Suitable
Type C Connector SHOU HAN SH U262 161N 4BVC11 with Electrical Rating 5V 3A and
Product Specification
| length | 20mm | Number of Ports | 1 |
| Supplementary Features | - | Number of Contacts | 4P |
| Mounting Type | 卧贴 | Center Height | - |
| Current Rating | 1.5A | Detection color | 黑色 |
| Voltage Rating | 30V | Operating Temperature | -25℃~+85℃ |
| Connector Type | Type-A | Connect-Disconnect Life | 3千次 |
| Gender | 公 | Description | USB-A (USB TYPE-A) Receptacle Connector 4 Position Surface Mount, Right Angle |
| Mfr. Part # | AM 90°YC | Package | SMD |
| Model Number | AM 90°YC |
This document outlines the specifications for the USB AM 90YC connector, a product of Shenzhen Shouhan Technology Co., Ltd. It details the product's electrical, mechanical, and durability characteristics, designed for reliable performance within a specified temperature range and under standard atmospheric conditions. The connector is suitable for applications requiring secure and stable USB connections.
| Item | Test Conditions | Performance | Specification |
| RATING () | |||
| DC 30V 1.5A | |||
| PRACTICAL TEMPERATURE RANGE () | |||
| -25~85C | |||
| STANDARD ATMOSPHERIC CONDITIONS () | |||
| (1) Temperature | 5C TO 35 | ||
| (2) Humidity | 45% TO 85% | ||
| (3) Pressure | 86Kpa TO 106Kpa | ||
| MECHANICAL () | |||
| CONNECTION FORCE () | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES | 3.75Kgf MAX | |
| DISCONNECTION FORCE () | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES | 1.02Kgf MIN | |
| TERMINAL STRENGTH () | A STATIC LOAD OF 0.1N/m(1kgf/cm)SHALL BE APPLIED TO THE TIP OF THE TERMINAL FOR 1 MIN IN ANY DIRECTION | THERE SHALL BE NO DAMAGE TO THE TERMINAL SUCH AS CRACKS, LOOSENESS OR PLAY ELECTRICAL ,AND MECHANICAL CHARACTERISTICS SHALL BE SATISFIED | |
| ELECTRICAL () | |||
| CONTACT RESISTANCE () | MEASURED AT SMALL CURRENT 100m A OR LESS 1000Hz | 30m MAX | |
| INSULATION RESISTANCE () | APPLY A VOLTAGE OF 500V DC FOR 1 MIN TO FOLLOWING PORTIONS AFTER WHICH MEASUREMENT SHALL BE MADE: (1) BETWEEN BODY AND CONDUCTOR (2) BETWEEN CONDUCTORS NOT TO BE CONTACT (3) BETWEEN CONDUCTORS NOT TO BE WHEN PLUG IS INSERTED | 1000M MIN | |
| DIELECTRIC STRENGTH () | AC 500V ims(50~60Hz)FOR 1 MIN TRIP CURRENT:0.5mA (1) BETWEEN BODY AND CONDUCTOR (2) BETWEEN CONDUCTORS NOT TO BE CONTACL (3) BETWEEN CONDUCTORS NOT TO BE WHEN PLUG IS INSERTED | WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC | |
| DURABILITY () | |||
| SOLDERABILITY TEST () | (1) THE TOP OF THE TERMINALS SHALL BE DIPPED 1mm IN THE SOLDER BATH OF 2305 FOR 50.5 SECONDS | SOLDER WETTING TIME SHALL BE 3 SEC OR LESS | (2) THE AREA OF SOLDERING SHOULD BE OVER 75% |
| RESISTANCE TO SOLDERING HEAT TEST () | SOLDERING IRON METHOD: BIT TEMPERATURE 3305 APPLICATION TIME OF SOLDERING IRON 30.5 SEC HOWEVER EXCESSIVE PRESSURE SHALL NOT BE APPLIED TO THE TERMINAL | WITHOUT DEFORMATION OF CASE OR EXCESSIVE LOOSENESS OF TERMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |
| HUMIDITY TEST () | THE JACK SHALL BE STORED AT A TEMPERATURE OF 402 AND A HUMIDITY OF 90%TO 96% FOR 96 Hr,THEN THE JACK SHALL BE MAINTAINED AT STANDARD ATMOSPHERIC CONDITION FOR 1 Hr FOR OTHER PROCEDURES | ||
| HEAT TEST () | THE JACK SHALL BE STORED AT A TEMPERATURE OF 702 FOR 96 HOURSAND THEN IT SHALL BE SUBJECTED TO THE CONTROLLED RECOVERY MBASURBM | THERE SHALL BE NO DAMAGE ON APPEARANCE MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |
| COLD TEST () | THE JACK SHALL BE STORED AT A TEMPERATURE OF -253 FOR 96 HOURS AND THEN IT SHALL BE SUBJECTED TO THE CONTROLLED RECOVERY CONDITIONS FOR 1 HOUR AFTER WHICH | THERE SHALL BE NO DAMAGE ON APPEARANCE MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |
| LIFE TEST () | (1) WITHOUT LOAD CONNECTION AND DISCONNECTION SHALL BE MADE WITH THE MATING PLUGS AND JACKS FOR 3000 CYCLES AT A SPEED OF 10 TO 25 CYCLES/MIN | (1) CONTACT RESISTANCE SHALL BE 0.1 (2) DISCONNECTION FORCE SHALL BE 0.8 TO 2.0N (3) MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |
| (2) LOAD AT RATING CONDITION NON-INDUCTIVE LOAD CONNECTION AND DISCONNECTION SHALL BE MADE 3,000 CYCLES AT A SPEED 10 TO 20 CYCLES / MIN | |||
| TEMPERATURE CYCLING TEST () | THE JACK SHALL BE SUBJECTED TO 5 CYCLES OF THE FOLLOWING CONDITIONS SHOWED IN THE FIGURE,AND THEN SHALL RETURNED ALLOWED TO REMAIN IN ROOM AMBIENT CONDITION FOR 30 MINUTES | THERE SHALL BE NO DEFORMATION OR CRACKS IN MOLDED PART. INSERTION EXTRACTION FORCE:3 TO 20N CONTACT RESISTANCE:MAX.30M INSULATION RESISTANCE: MIN.100 M DIELECTRIC WITHSTANDING VOLTAGE: 100VAC/MIN(BETWEEN TERMINALS) | |
| COLD&HEAT SHOCK TEST () | THE JACK SHALL BE SUBJECTED TO 5 CYCLES OF THE FOLLOWING CONDITIONS SHOWED IN THE FIGURE,AND THEN SHALL RETURNED AND ALLOWED TO REMAIN IN ROOM AMBIENT CONDITION FOR 30 MINUTES | THERE SHALL BE NO DEFORMATION OR CRACKS IN MOLDED PART. INSERTION EXTRACTION FORCE:3 TO 25N CONTACT RESISTANCE:MAX.30M INSULATION RESISTANCE: MIN.100 M DIELECTRIC WITHSTANDING VOLTAGE: 500VAC/MIN(BETWEEN TERMINALS) | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
<300
Ecer Certification：
Verified Supplier
Hefei Purple Horn E-Commerce Co., Ltd. is a professional company focus on integrated circuit ic business. Hefei Purple Horn E-Commerce Co., Ltd. will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Fou... Hefei Purple Horn E-Commerce Co., Ltd. is a professional company focus on integrated circuit ic business. Hefei Purple Horn E-Commerce Co., Ltd. will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Fou...
Get in touch with us
Leave a Message, we will call you back quickly!