Shenzhen ECER Network Technology Co., Ltd.
| Number of Ports | 1 |
| Number of Contacts | 6P |
| Mounting Type | 卧贴 |
| Current Rating | 3A |
| Voltage Rating | 20V |
| Detection color | 黑色 |
| Operating Temperature | -25℃~+85℃ |
| Connector Type | Type-C |
| Connect-Disconnect Life | 5千次 |
| Gender | 母 |
| Description | USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount, Right Angle |
| Mfr. Part # | TYPE-C 6PIN DT |
| Package | SMD |
| Model Number | TYPE-C 6PIN DT |
View Detail Information
Explore similar products
Lead Free Connector Amphenol 10119313-301TLF with Thermoplastic Housing and Gold
Micro USB Connector JST UB-MC5BR3-SD204-4S-1-TB with SMT Mounting and 10000
Top Mount Type C Connector 6 Pin Configuration HCTL HC-TYPE-C-6P-01B Suitable
Type C Connector SHOU HAN SH U262 161N 4BVC11 with Electrical Rating 5V 3A and
Product Specification
| Number of Ports | 1 | Number of Contacts | 6P |
| Mounting Type | 卧贴 | Current Rating | 3A |
| Voltage Rating | 20V | Detection color | 黑色 |
| Operating Temperature | -25℃~+85℃ | Connector Type | Type-C |
| Connect-Disconnect Life | 5千次 | Gender | 母 |
| Description | USB-C (USB TYPE-C) Receptacle Connector 6 Position Surface Mount, Right Angle | Mfr. Part # | TYPE-C 6PIN DT |
| Package | SMD | Model Number | TYPE-C 6PIN DT |
This document outlines the specifications for a TYPE-C 6PIN DT connector manufactured by SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD. It details the product's technical, mechanical, and electrical characteristics, along with performance under various environmental and durability tests. This connector is designed for applications requiring reliable data and power transmission.
| Item | Test Conditions | Performance | Specification |
| RATING | |||
| Rated Voltage | 5 V | 3 A | |
| Practical Temperature Range | -30C~80C | ||
| Standard Atmospheric Conditions | (1) Temperature: 5~35 (2) Humidity: 45%~85% (3) Pressure: 86Kpa~106Kpa | ||
| MECHANICAL | |||
| Connection Force | After connecting and disconnecting 3 times using standard plug gauge | 0.5~2.0 Kgf | |
| Disconnect Force | After connecting and disconnecting 3 times using standard plug gauge | 0.8~2.0 Kgf | |
| Terminal Strength | Static load of 0.1N/m (1kgf/cm) applied to the tip of the terminal for 1 min in any direction. No damage, looseness, or play. Mechanical and electrical characteristics shall be satisfied. | ||
| ELECTRICAL | |||
| Contact Resistance | Measured at small current (100mA or less), 1000Hz | 40m MAX | |
| Insulation Resistance | Apply 100V DC for 1 min between specified portions. | 100M MIN | |
| Dielectric Strength | Apply AC 100V (rms, 50~60Hz) for 1 min. Trip current: 0.5mA. Between specified portions. No arcing or breakdown. | ||
| DURABILITY | |||
| Solderability Test | Terminal tops dipped 1mm in solder bath at 2505 for 50.5 seconds. | (1) Solder wetting time 3 sec (2) Soldering area > 75% | |
| Resistance to Soldering Heat Test (Reflow) | Preheat: Copper foil surface temp reaches 180, 120s after PCB enters equipment. | No deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| Peak Temperature: Copper foil surface temp reaches 2605 within 20 seconds. | |||
| Resistance to Soldering Heat Test (Hand Soldering) | Bit temperature 3305, application time 30.5 sec. No excessive pressure on terminals. | No deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| Humidity Test | Stored at 402 and 90%~96% humidity for 96 hours, then maintained at standard atmospheric conditions for 1 hour. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| Heat Test | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 hour. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| Cold Test | Stored at -253 for 96 hours, then subjected to controlled recovery for 1 hour. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| Life Test | (1) Without Load: 5000 cycles at 10-25 cycles/min. | (1) Contact Resistance 0.1 | |
| (2) Load: At rating condition (non-inductive load), 5000 cycles at 10-20 cycles/min. | (2) Disconnection Force: 0.8 to 2.0 N | ||
| (3) Other characteristics shall be satisfied. | (3) Mechanical and electrical characteristics shall be satisfied. | ||
| Temperature Cycling Test | 5 cycles of specified conditions. | No deformation or cracks in molded part. | (1) Insertion & Extraction Force: 3 to 20 N |
| (2) Contact Resistance: MAX. 30m | |||
| (3) Insulation Resistance: MIN. 100 M | |||
| (4) Dielectric Withstanding Voltage: 100VAC/min (between terminals) | |||
| Cold & Heat Shock Test | 5 cycles of specified conditions. | No deformation or cracks in molded part. | (1) Insertion & Extraction Force: 3 to 25 N |
| (2) Contact Resistance: MAX. 30m | |||
| (3) Insulation Resistance: MIN. 100 M | |||
| (4) Dielectric Withstanding Voltage: 500VAC/min (between terminals) | |||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!