Shenzhen ECER Network Technology Co., Ltd.
| Number of Ports | 1 |
| Supplementary Features | - |
| Number of Contacts | 16P |
| Mounting Type | 卧贴 |
| Center Height | 1.68mm |
| Current Rating | 3A |
| Voltage Rating | 20V |
| Detection color | 黑色 |
| Operating Temperature | -30℃~+80℃ |
| Connector Type | Type-C |
| Gender | 母 |
| Connect-Disconnect Life | 1万次 |
| Description | USB-C (USB TYPE-C) Receptacle Connector 16 Position Surface Mount, Right Angle |
| Mfr. Part # | HX TYPE-C 16P L9.5 |
| Package | SMD |
| Model Number | HX TYPE-C 16P L9.5 |
View Detail Information
Explore similar products
Lead Free Connector Amphenol 10119313-301TLF with Thermoplastic Housing and Gold
Micro USB Connector JST UB-MC5BR3-SD204-4S-1-TB with SMT Mounting and 10000
Top Mount Type C Connector 6 Pin Configuration HCTL HC-TYPE-C-6P-01B Suitable
Type C Connector SHOU HAN SH U262 161N 4BVC11 with Electrical Rating 5V 3A and
Product Specification
| Number of Ports | 1 | Supplementary Features | - |
| Number of Contacts | 16P | Mounting Type | 卧贴 |
| Center Height | 1.68mm | Current Rating | 3A |
| Voltage Rating | 20V | Detection color | 黑色 |
| Operating Temperature | -30℃~+80℃ | Connector Type | Type-C |
| Gender | 母 | Connect-Disconnect Life | 1万次 |
| Description | USB-C (USB TYPE-C) Receptacle Connector 16 Position Surface Mount, Right Angle | Mfr. Part # | HX TYPE-C 16P L9.5 |
| Package | SMD | Model Number | HX TYPE-C 16P L9.5 |
The HX TYPE-C 16P L9.5 is a high-quality USB Type-C connector designed for reliable electrical and mechanical performance. It features a robust construction with LCP housing, C2680 terminals with nickel and gold plating, and a stainless steel shell. This connector is suitable for a wide range of applications requiring stable power delivery and data transmission, with a rated voltage of 20V DC and a rated current of 3A.
| Item | Specification | Test Conditions |
|---|---|---|
| Electrical Characteristics | ||
| Rated Voltage | 20V DC | |
| Rated Current | 3A (VBUS pins); 1.25A (GND pins); 0.25A (other pins) | |
| Contact Resistance | 40m Max | 20mV, 100mA |
| Insulation Resistance | 100M Min | DC 100V, 1 min |
| Dielectric Strength | 100V AC rms (50-60Hz) for 1 min | Trip Current: 0.5mA; Between body and conductor, between conductors not to be contact, between conductors not to be when plug is inserted |
| Mechanical Performance | ||
| Insertion Force | 0.5-2.0 Kgf | Measured after connecting and disconnecting using standard plug gauge 3 times |
| Withdrawal Force | 0.6-2.0 Kgf | Measured after connecting and disconnecting using standard plug gauge 3 times |
| Terminal Strength | No damage such as cracks, looseness or play; Satisfy electrical and mechanical characteristics | Static load of 0.1N/m (1kgf/cm) applied to the tip for 1 min in any direction |
| Durability | ||
| Solderability Test | Solder wetting time 3 sec; Soldering area > 75% | Terminals dipped 1mm in solder bath at 2505 for 50.5 sec |
| Resistance to Soldering Heat Test (Reflow) | No deformation of case or excessive looseness of terminals; Satisfy electrical characteristics | Preheat: 180 for 120s; Peak temperature: 2605 within 20 sec |
| Resistance to Soldering Heat Test (Iron) | No deformation of case or excessive looseness of terminals; Satisfy electrical characteristics | Bit temperature 3305, application time 30.5 sec; No excessive pressure applied |
| Humidity Test | No damage on appearance; Satisfy mechanical and electrical characteristics | 402, 90%-96% humidity for 96 Hr, then 1 Hr at standard atmospheric conditions |
| Heat Test | No damage on appearance; Satisfy mechanical and electrical characteristics | 702 for 96 hours, then 1 Hr at room temperature |
| Cold Test | No damage on appearance; Satisfy mechanical and electrical characteristics | -253 for 96 hours, then 1 Hr at room temperature |
| Life Test (Without Load) | Contact Resistance 0.1; Withdrawal Force 0.8-2.0N; Satisfy mechanical and electrical characteristics | 10000 cycles at a speed of 10 to 25 cycles/min |
| Life Test (With Load) | Contact Resistance 0.1; Withdrawal Force 0.8-2.0N; Satisfy mechanical and electrical characteristics | 10000 cycles at a speed of 10 to 20 cycles/min (Rating condition, non-inductive load) |
| Temperature Cycling Test | No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 20N; Contact Resistance: Max.30m; Insulation Resistance: Min.100 M; Dielectric Withstanding Voltage: 100VAC/min (Between terminals) | 5 cycles of specified temperature profile (-40 to 80) |
| Cold & Heat Shock Test | No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 25N; Contact Resistance: Max.30m; Insulation Resistance: Min.100 M; Dielectric Withstanding Voltage: 500VAC/min (Between terminals) | 5 cycles of specified temperature profile (-20 to 70) |
| Environmental | ||
| Operating Temperature Range | -30 to +80 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!