Shenzhen ECER Network Technology Co., Ltd.
| Description | SMD USB, DVI, HDMI Connector Assemblies RoHS |
| Mfr. Part # | HX 10.0 HCHTJB6.3 |
| Package | SMD |
| Model Number | HX 10.0 HCHTJB6.3 |
View Detail Information
Explore similar products
Lead Free Connector Amphenol 10119313-301TLF with Thermoplastic Housing and Gold
Micro USB Connector JST UB-MC5BR3-SD204-4S-1-TB with SMT Mounting and 10000
Top Mount Type C Connector 6 Pin Configuration HCTL HC-TYPE-C-6P-01B Suitable
Type C Connector SHOU HAN SH U262 161N 4BVC11 with Electrical Rating 5V 3A and
Product Specification
| Description | SMD USB, DVI, HDMI Connector Assemblies RoHS | Mfr. Part # | HX 10.0 HCHTJB6.3 |
| Package | SMD | Model Number | HX 10.0 HCHTJB6.3 |
This document outlines the specifications for the HX 10.0 HCHTJB6.3 USB product from Shenzhen Hanxia Electronic Co., Ltd. It details the product's technical performance, including electrical, mechanical, and durability characteristics, designed for operation within a specific temperature and atmospheric range.
| Item | Project | Test Conditions | Performance | Specification |
| RATING | Rated Value | DC 30V 1.5A | ||
| Operating Temperature Range | -25~85C | |||
| STANDARD ATMOSPHERIC CONDITIONS | Temperature | 5C TO 35 | ||
| Humidity | 45% TO 85% | |||
| Pressure | 86Kpa TO 106Kpa | |||
| MECHANICAL | Connection Force | After connecting and disconnecting using standard plug gauge 3 times | MAX | 3.57Kgf |
| Disconnection Force | After connecting and disconnecting using standard plug gauge 3 times | MIN | 1.02Kgf | |
| Terminal Strength | Static load of 0.1N/m (1kgf/cm) applied to the tip of the terminal for 1 min in any direction | No damage to terminal such as cracks, looseness or play; satisfy electrical and mechanical characteristics | ||
| ELECTRICAL | Contact Resistance | Measured at small current (100mA or less), 1000Hz | MAX | 30m |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to specified portions | MIN | 1000M | |
| Dielectric Strength | AC 500V rms (50~60Hz) for 1 min, trip current: 0.5mA (between specified portions) | No insulation breakdown or arcing | ||
| DURABILITY | Solderability Test | Terminals dipped 1mm in solder bath of 2505 for 50.5 seconds | (1) Solder wetting time 3 sec (2) Soldering area > 75% | |
| Resistance to Soldering Heat Test (Reflow) | Preheat: 180, 120s; Peak temp: 2605 within 20s | No deformation of case or excessive looseness of terminals; satisfy electrical characteristics | ||
| Resistance to Soldering Heat Test (Soldering Iron) | Bit temp 3305, application time 30.5 sec, no excessive pressure on terminals | No deformation of case or excessive looseness of terminals; satisfy electrical characteristics | ||
| Humidity Test | Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr | |||
| Heat Test | Stored at 702 for 96 Hours, then subjected to controlled recovery for 1 Hr | No damage on appearance; satisfy mechanical and electrical characteristics | ||
| Cold Test | Stored at -253 for 96 Hours, then subjected to controlled recovery for 1 Hr | No damage on appearance; satisfy mechanical and electrical characteristics | ||
| LIFE TEST | With Load (non-inductive) | 5000 cycles of connection/disconnection at 10 to 20 cycles/min | (1) Contact Resistance 0.1 (2) Disconnection Force 0.8 to 2.0N (3) Satisfy mechanical and electrical characteristics | |
| Without Load | 5000 cycles of connection/disconnection with mating plugs/jacks at 10 to 25 cycles/min | |||
| TEMPERATURE CYCLING TEST | 5 cycles of specified temperature conditions, then 30 min in room ambient | No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 20N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 100VAC/min (between terminals) | ||
| COLD & HEAT SHOCK TEST | 5 cycles of specified temperature conditions, then 30 min in room ambient | No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 25N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 500VAC/min (between terminals) |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!