Shenzhen ECER Network Technology Co., Ltd.
| Number of Ports | 1 |
| Number of Contacts | 16P |
| Mounting Type | 卧贴 |
| Current Rating | 3A |
| Detection color | 黑色 |
| Operating Temperature | -30℃~+85℃ |
| Connector Type | Type-C |
| Connect-Disconnect Life | 1万次 |
| Gender | 母 |
| Description | USB-C (USB TYPE-C) Receptacle Connector 16 Position Surface Mount, Right Angle |
| Mfr. Part # | TYPE-C 16PFS 4J-H7.05 IPX6 |
| Package | SMD |
| Model Number | TYPE-C 16PFS 4J-H7.05 IPX6 |
View Detail Information
Explore similar products
Lead Free Connector Amphenol 10119313-301TLF with Thermoplastic Housing and Gold
Micro USB Connector JST UB-MC5BR3-SD204-4S-1-TB with SMT Mounting and 10000
Top Mount Type C Connector 6 Pin Configuration HCTL HC-TYPE-C-6P-01B Suitable
Type C Connector SHOU HAN SH U262 161N 4BVC11 with Electrical Rating 5V 3A and
Product Specification
| Number of Ports | 1 | Number of Contacts | 16P |
| Mounting Type | 卧贴 | Current Rating | 3A |
| Detection color | 黑色 | Operating Temperature | -30℃~+85℃ |
| Connector Type | Type-C | Connect-Disconnect Life | 1万次 |
| Gender | 母 | Description | USB-C (USB TYPE-C) Receptacle Connector 16 Position Surface Mount, Right Angle |
| Mfr. Part # | TYPE-C 16PFS 4J-H7.05 IPX6 | Package | SMD |
| Model Number | TYPE-C 16PFS 4J-H7.05 IPX6 |
This document details the TYPE-C 16PFS 4J-H7.05 IPX6 connector, designed for robust applications requiring high reliability and environmental resistance. It features a waterproof design (IPX6) and is suitable for a wide operating temperature range.
| Item | Test Conditions | Performance | Specification |
| RATING | |||
| Voltage | DC20V | ||
| Temperature Range | Practical Temperature Range | -30~80℃ | |
| STANDARD ATMOSPHERIC CONDITIONS | |||
| Atmospheric Conditions | For measurements and tests | (1) Temperature: 5℃ to 35℃ (2) Humidity: 45% to 85% (3) Pressure: 86Kpa to 106Kpa | |
| MECHANICAL | |||
| Connection Force | After connecting and disconnecting using standard plug gauge 3 times | 5-20N | |
| Disconnection Force | After connecting and disconnecting using standard plug gauge 3 times | 8-20N | |
| Terminal Strength | Apply a static load of 0.1N/m (1kgf/cm) to the tip of the terminal for 1 min in any direction | No damage, cracks, looseness, or play. Satisfy electrical and mechanical characteristics. | |
| ELECTRICAL | |||
| Contact Resistance | Measured at small current (100mA or less), 1000Hz | 40mΩ MAX | |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to specified portions | 100MΩ MIN | |
| Dielectric Strength | Apply AC 100V (50/60Hz) for 1 min, trip current: 0.5mA, to specified portions | No damage, arcing, or breakdown | |
| DURABILITY | |||
| Solderability Test | Terminals dipped 1mm in solder bath at 250℃±5℃ for 5 ±0.5 seconds | (1) Solder wetting time: ≤ 3 seconds (2) Soldering area: > 75% | |
| Resistance to Soldering Heat Test (Reflow) | Preheat: Reach 180℃ on copper foil surface after PCB enters equipment. | Without deformation of case or excessive looseness of terminals. Satisfy electrical and mechanical characteristics. | |
| Peak Temperature: Reach 260℃±5℃ within 20 seconds. | |||
| Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 330℃±5℃, application time 3 ±0.5 seconds. No excessive pressure on terminals. | Without deformation of case or excessive looseness of terminals. Satisfy electrical and mechanical characteristics. | |
| Humidity Test | Stored at 40℃±2℃ and 90% to 96% humidity for 96 hours, then maintained at standard atmospheric condition for 1 hour. | No damage on appearance. Satisfy mechanical and electrical characteristics. | |
| Heat Test | Stored at 70℃±2℃ for 96 hours, then subjected to controlled recovery for 1 hour. | No damage on appearance. Satisfy mechanical and electrical characteristics. | |
| Cold Test | Stored at -25℃±3℃ for 96 hours, then subjected to controlled recovery for 1 hour. | No damage on appearance. Satisfy mechanical and electrical characteristics. | |
| Life Test (Without Load) | Connection and disconnection with mating plugs for 10000 cycles at a speed of 10 to 25 cycles/min. | ||
| (1) Contact Resistance: ≤ 0.1Ω (2) Disconnection Force: 0.8 to 2.0N (3) Satisfy mechanical and electrical characteristics. | |||
| Life Test (With Load) | Connection and disconnection at rating condition (non-inductive load) for 10000 cycles at a speed of 10 to 20 cycles/min. | (1) Contact Resistance: ≤ 0.1Ω (2) Disconnection Force: 0.8 to 2.0N (3) Satisfy mechanical and electrical characteristics. | |
| Temperature Cycling Test | 5 cycles of specified temperature conditions, then return to room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30mΩ. Insulation Resistance: Min. 100 MΩ. Dielectric Withstanding Voltage: 100VAC/min (between terminals). | |
| Cold & Heat Shock Test | 5 cycles of specified temperature conditions, then return to room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30mΩ. Insulation Resistance: Min. 100 MΩ. Dielectric Withstanding Voltage: 500VAC/min (between terminals). | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!