Shenzhen ECER Network Technology Co., Ltd.
| length | 8.8mm |
| Number of Ports | 1 |
| Number of Contacts | 2P |
| Mounting Type | 立贴 |
| Current Rating | 3A |
| Voltage Rating | 5V |
| Detection color | 黑色 |
| Operating Temperature | -30℃~+85℃ |
| Connector Type | Type-C |
| Gender | 母 |
| Connect-Disconnect Life | 5千次 |
| Description | 1 2P -30℃~+85℃ Type-C SMD USB, DVI, HDMI Connector Assemblies RoHS |
| Mfr. Part # | TYPE-C 2P 180 LTH8.8 |
| Package | SMD |
| Model Number | TYPE-C 2P 180 LTH8.8 |
View Detail Information
Explore similar products
Lead Free Connector Amphenol 10119313-301TLF with Thermoplastic Housing and Gold
Micro USB Connector JST UB-MC5BR3-SD204-4S-1-TB with SMT Mounting and 10000
Top Mount Type C Connector 6 Pin Configuration HCTL HC-TYPE-C-6P-01B Suitable
Type C Connector SHOU HAN SH U262 161N 4BVC11 with Electrical Rating 5V 3A and
Product Specification
| length | 8.8mm | Number of Ports | 1 |
| Number of Contacts | 2P | Mounting Type | 立贴 |
| Current Rating | 3A | Voltage Rating | 5V |
| Detection color | 黑色 | Operating Temperature | -30℃~+85℃ |
| Connector Type | Type-C | Gender | 母 |
| Connect-Disconnect Life | 5千次 | Description | 1 2P -30℃~+85℃ Type-C SMD USB, DVI, HDMI Connector Assemblies RoHS |
| Mfr. Part # | TYPE-C 2P 180 LTH8.8 | Package | SMD |
| Model Number | TYPE-C 2P 180 LTH8.8 |
This specification document outlines the technical details for the TYPE-C 2P 180 LTH8.8 connector from Shenzhen Shouhan Technology Co., Ltd. It details the product's ratings, environmental operating conditions, and comprehensive mechanical, electrical, and durability test specifications.
| Category | Item | Test Conditions | Performance/Specification |
| RATING | Rating | 5 V 3 A | N/A |
| Practical Temperature Range | -30C~85C | Within -30C~85C | |
| MECHANICAL | Connection Force | After connecting and disconnecting using standard plug gauge 3 times. | 0.5~2.0Kgf |
| Disconnecti O Force | After connecting and disconnecting using standard plug gauge 3 times. | 0.6~2.0Kgf | |
| ELECTRICAL | Contact Resistance | Measured at small current (100mA or less) 1000Hz | 40m MAX |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to following portions: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 100M MIN | |
| Dielectric Strength | AC 100V ims(50~60Hz) for 1 min, Trip Current: 0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | Without damage to parts arcing or breakdown etc. | |
| DURABILITY | Solderability Test | Top of terminals dipped 1mm in solder bath of 2505 for 50.5 seconds. | (1) Solder wetting time: 3 sec (2) Soldering area: > 75% |
| Resistance to Soldering Heat Test (Reflow) | Preheat: 180, 120s. Tallest Temperature: 2605 within 20 seconds. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| HUMIDITY TEST | Humidity Test | Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| HEAT TEST | Heat Test | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 Hr. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| COLD TEST | Cold Test | Stored at -253 for 96 hours, then subjected to controlled recovery for 1 Hr. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| LIFE TEST | Life Test (Without Load) | Connection and disconnection for 5000 cycles at a speed of 10 to 25 cycles/min. | N/A |
| Life Test (With Load) | Connection and disconnection for 5000 cycles at a speed of 10 to 20 cycles/min (Rating condition, Non-inductive load). | (1) Contact Resistance: 0.1 (2) Disconnection Force: 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied. | |
| TEMPERATURE CYCLING TEST | Temperature Cycling Test | 5 cycles of specified temperature conditions, then 30 minutes in room ambient. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| COLD&HEAT SHOCK TEST | Cold & Heat Shock Test | 5 cycles of specified temperature conditions, then 30 minutes in room ambient. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!