Shenzhen ECER Network Technology Co., Ltd.
| length | 18.8mm |
| Number of Ports | 1 |
| Supplementary Features | - |
| Number of Contacts | 4P |
| Mounting Type | 卧贴 |
| Center Height | - |
| Current Rating | 1.5A |
| Detection color | 白色 |
| Voltage Rating | 30V |
| Operating Temperature | -25℃~+85℃ |
| Connector Type | Type-A |
| Connect-Disconnect Life | 5千次 |
| Gender | 公 |
| Description | USB-A (USB TYPE-A) Receptacle Connector 4 Position Surface Mount, Right Angle |
| Mfr. Part # | AM 180° |
| Package | SMD |
| Model Number | AM 180° |
View Detail Information
Explore similar products
Lead Free Connector Amphenol 10119313-301TLF with Thermoplastic Housing and Gold
Micro USB Connector JST UB-MC5BR3-SD204-4S-1-TB with SMT Mounting and 10000
Top Mount Type C Connector 6 Pin Configuration HCTL HC-TYPE-C-6P-01B Suitable
Type C Connector SHOU HAN SH U262 161N 4BVC11 with Electrical Rating 5V 3A and
Product Specification
| length | 18.8mm | Number of Ports | 1 |
| Supplementary Features | - | Number of Contacts | 4P |
| Mounting Type | 卧贴 | Center Height | - |
| Current Rating | 1.5A | Detection color | 白色 |
| Voltage Rating | 30V | Operating Temperature | -25℃~+85℃ |
| Connector Type | Type-A | Connect-Disconnect Life | 5千次 |
| Gender | 公 | Description | USB-A (USB TYPE-A) Receptacle Connector 4 Position Surface Mount, Right Angle |
| Mfr. Part # | AM 180° | Package | SMD |
| Model Number | AM 180° |
This document specifies the technical requirements for the USB AM 180 connector from SHENZHEN SHOUHAN TECHNOLOGY CO., LTD. It details the product's electrical, mechanical, and durability specifications, intended for use within a practical temperature range of -25 to 85. Note: This product is designed for manual soldering only.
| Item | Description | Test Conditions | Performance Specification |
| RATING | DC Voltage | 30V | |
| Current | 1.5A | ||
| PRACTICAL TEMPERATURE RANGE | Usage Range | -25 ~ 85 | |
| Standard Atmospheric Conditions for Testing | Temperature: 5 to 35 Humidity: 45% to 85% Pressure: 86Kpa to 106Kpa | ||
| MECHANICAL | CONNECTION FORCE | After connecting and disconnecting using standard plug gauge 3 times. | 3.57Kgf MAX |
| DISCONNECTION FORCE | After connecting and disconnecting using standard plug gauge 3 times. | 1.02Kgf MIN | |
| TERMINAL STRENGTH | Static Load | 0.1N/m(1kgf/cm) applied to the tip of the terminal for 1 min in any direction. | No damage, satisfies electrical and mechanical characteristics. |
| ELECTRICAL | CONTACT RESISTANCE | Measured at small current (100mA or less), 1000Hz | 30m MAX |
| INSULATION RESISTANCE | Apply 100V DC for 1 min between various portions (body/conductor, non-contacting conductors, conductors when plug is inserted). | 1000M MIN | |
| DIELECTRIC STRENGTH | Apply AC 500V rms (50~60Hz) for 1 min, Trip Current: 0.5mA between various portions. | No arcing or breakdown. | |
| DURABILITY | SOLDERABILITY TEST | Terminals dipped 1mm in solder bath at 2305 for 50.5 seconds. | Solder wetting time 3 sec; Soldering area > 75%. |
| RESISTANCE TO SOLDERING HEAT TEST | Soldering iron method: Bit temperature 3305, application time 30.5 sec (no excessive pressure). | No deformation of case or excessive looseness of terminals; satisfies electrical characteristics. | |
| HUMIDITY TEST | Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric conditions for 1 Hr. | No appearance damage; satisfies mechanical and electrical characteristics. | |
| HEAT TEST | Stored at 702 for 96 Hours, then subjected to controlled recovery for 1 Hour. | ||
| COLD TEST | Stored at -253 for 96 Hours, then subjected to controlled recovery conditions for 1 Hour. | No appearance damage; satisfies mechanical and electrical characteristics. | |
| LIFE TEST | Without Load | Connection and disconnection for 5000 cycles at 10 to 25 cycles/min. | |
| With Load (Rating Condition, Non-Inductive Load) | Connection and disconnection for 5000 cycles at 10 to 20 cycles/min. | Contact Resistance 0.1; Disconnection Force 0.8 to 2.0N; Satisfies mechanical and electrical characteristics. | |
| TEMPERATURE CYCLING TEST | Conditions | 5 cycles of specified temperature profile (e.g., -20 to 80). | No deformation or cracks in molded part. Insertion/Extraction Force: 3 to 20N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| Recovery | 30 minutes in room ambient condition after cycling. | ||
| COLD & HEAT SHOCK TEST | Conditions | 5 cycles of specified temperature shock profile (e.g., -20 to 70). | No deformation or cracks in molded part. Insertion/Extraction Force: 3 to 25N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
| Recovery | 30 minutes in room ambient condition after cycling. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!