Shenzhen ECER Network Technology Co., Ltd.
| length | 10.5mm |
| Number of Ports | 2 |
| Supplementary Features | - |
| Number of Contacts | 4Px2 |
| Mounting Type | 直插 |
| Center Height | - |
| Current Rating | 1.5A |
| Detection color | 白色 |
| Voltage Rating | 30V |
| Operating Temperature | -25℃~+85℃ |
| Connector Type | Type-A |
| Connect-Disconnect Life | 1.5千次 |
| Gender | 母 |
| Description | USB-A (USB TYPE-A) Receptacle Connector 4 Positionx2 Through Hole |
| Mfr. Part # | 10.5mm AF USB |
| Package | Through Hole |
| Model Number | 10.5mm AF USB |
View Detail Information
Explore similar products
Lead Free Connector Amphenol 10119313-301TLF with Thermoplastic Housing and Gold
Micro USB Connector JST UB-MC5BR3-SD204-4S-1-TB with SMT Mounting and 10000
Top Mount Type C Connector 6 Pin Configuration HCTL HC-TYPE-C-6P-01B Suitable
Type C Connector SHOU HAN SH U262 161N 4BVC11 with Electrical Rating 5V 3A and
Product Specification
| length | 10.5mm | Number of Ports | 2 |
| Supplementary Features | - | Number of Contacts | 4Px2 |
| Mounting Type | 直插 | Center Height | - |
| Current Rating | 1.5A | Detection color | 白色 |
| Voltage Rating | 30V | Operating Temperature | -25℃~+85℃ |
| Connector Type | Type-A | Connect-Disconnect Life | 1.5千次 |
| Gender | 母 | Description | USB-A (USB TYPE-A) Receptacle Connector 4 Positionx2 Through Hole |
| Mfr. Part # | 10.5mm AF USB | Package | Through Hole |
| Model Number | 10.5mm AF USB |
This document outlines the specifications for the USB-AF 10.5mm AF USB product from SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD. It details the product's performance, electrical, and mechanical characteristics under various test conditions, including temperature range, standard atmospheric conditions, connection/disconnection forces, resistance, insulation, dielectric strength, durability, and environmental tests.
| Item | Test Conditions | Performance | Unit | Min | Typ | Max |
| Mechanical Characteristics | Connection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | Kgf | 3.57 | ||
| Disconnection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | Kgf | 1.02 | |||
| Terminal Strength | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical, and mechanical characteristics shall be satisfied. | |||||
| Electrical Characteristics | Contact Resistance | Measured at small current (100mA or less) 1000Hz | m | 30 | ||
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. DC 100V 1 min. | M | 1000 | |||
| Dielectric Strength | AC 500V ims(50~60Hz) for 1 min. Trip current: 0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. DC 500V 1 min. | |||||
| Durability | Solderability Test | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. (1) Solder wetting time shall be 3 seconds or less. (2) The area of soldering should be over 75%. | ||||
| Resistance to Soldering Heat Test | Reflow soldering conditions: Preheat: Temperature on the copper foil surface should reach 180. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 within 20 seconds. Soldering iron method: Bit temperature 3305 Application time of soldering iron 30.5 sec. Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |||||
| Humidity Test | The jack shall be stored at a temperature of 402 and a humidity of 90% to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr. | |||||
| Heat Test | The jack shall be stored at a temperature of 702 for 96 hours, and then it shall be subjected to the controlled recovery. Appearance no abnormal, mechanical and electrical characteristics shall be satisfied. | |||||
| Cold Test | The jack shall be stored at a temperature of -253 for 96 hours and then it shall be subjected to the controlled recovery conditions for 1 hour. Appearance no abnormal, mechanical and electrical characteristics shall be satisfied. | |||||
| Life Test | Without Load | Connection and disconnection shall be made with the mating plugs and jacks for 1500 cycles at a speed of 10 to 25 cycles/min. | Cycles | 1500 | ||
| Load | At rating condition (non-inductive load) connection and disconnection shall be made 1500 cycles at a speed 10 to 20 cycles / min. (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 7N (3) Mechanical and electrical characteristics shall be satisfied. | |||||
| Temperature Cycling Test | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned allowed to remain in room ambient condition for 30 minutes. Product cannot deform or crack. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). | |||||
| Cold & Heat Shock Test | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned and allowed to remain in room ambient condition for 30 minutes. Product cannot deform or crack. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!