Shenzhen ECER Network Technology Co., Ltd.
| length | 8.8mm |
| Number of Ports | 1 |
| Supplementary Features | - |
| Number of Contacts | 10P |
| Mounting Type | 卧贴 |
| Center Height | - |
| Current Rating | 1A |
| Detection color | 黑色 |
| Voltage Rating | 30V |
| Operating Temperature | -25℃~+85℃ |
| Connector Type | Mini-B |
| Connect-Disconnect Life | 5千次 |
| Gender | 母 |
| Description | USB-Mini B Receptacle Connector 10 Position Surface Mount, Right Angle |
| Mfr. Part # | MINI 10PTK |
| Package | SMD |
| Model Number | MINI 10PTK |
View Detail Information
Explore similar products
Lead Free Connector Amphenol 10119313-301TLF with Thermoplastic Housing and Gold
Micro USB Connector JST UB-MC5BR3-SD204-4S-1-TB with SMT Mounting and 10000
Top Mount Type C Connector 6 Pin Configuration HCTL HC-TYPE-C-6P-01B Suitable
Type C Connector SHOU HAN SH U262 161N 4BVC11 with Electrical Rating 5V 3A and
Product Specification
| length | 8.8mm | Number of Ports | 1 |
| Supplementary Features | - | Number of Contacts | 10P |
| Mounting Type | 卧贴 | Center Height | - |
| Current Rating | 1A | Detection color | 黑色 |
| Voltage Rating | 30V | Operating Temperature | -25℃~+85℃ |
| Connector Type | Mini-B | Connect-Disconnect Life | 5千次 |
| Gender | 母 | Description | USB-Mini B Receptacle Connector 10 Position Surface Mount, Right Angle |
| Mfr. Part # | MINI 10PTK | Package | SMD |
| Model Number | MINI 10PTK | ||
| High Light | 10P Contacts Mini-B Connector ，5000 Connect-Disconnect Life USB Connector ，30V 1A Rating SMD Connector | ||
This specification outlines the MINI 10PTK, a product from Shenzhen Shouhan Technology Co., Ltd. It is designed for a practical temperature range of -25 to 85C and rated for DC 30V 1.0A. The product adheres to standard atmospheric conditions for testing, including temperatures between 5-35C, humidity of 45-85%, and pressure of 86-106 Kpa.
| Item | Test Conditions | Performance/Specification |
| MECHANICAL PROPERTIES | ||
| Connection Force | After connecting and disconnecting 3 times using standard plug gauge | 3.57Kgf MAX |
| Disconnection Force | After connecting and disconnecting 3 times using standard plug gauge | 1.02Kgf MIN |
| Terminal Strength | 0.1N/m(1kgf/cm) static load applied to terminal tip for 1 min in any direction | No damage to terminal (cracks, looseness, play); electrical and mechanical characteristics satisfied. |
| ELECTRICAL PROPERTIES | ||
| Contact Resistance | Measured at small current (100mA), 1000Hz | 50m MAX |
| Insulation Resistance | Apply 100V DC for 1 min between specified portions | 1000M MIN |
| Dielectric Strength | Apply AC 500V (50~60Hz) for 1 min, trip current 0.5mA between specified portions | No arcing or breakdown |
| DURABILITY | ||
| Solderability Test | Terminal top dipped 1mm in solder bath at 2505 for 50.5 sec | Solder wetting time 3 sec; Soldering area > 75% |
| Resistance to Soldering Heat Test (Reflow) | Preheat: Copper foil surface reaches 180, 120s after PCB enters equipment. Peak temp: 2605 within 20s. | No deformation of case or excessive looseness of terminals; electrical characteristics satisfied. |
| Soldering Iron Method: Bit temp 3305, application time 30.5 sec (no excessive pressure on terminal) | ||
| Humidity Test | Stored at 402 and 90%-96% humidity for 96 Hr, then maintained at standard atmospheric conditions for 1 Hr | Appearance, mechanical, and electrical characteristics satisfied. |
| Heat Test | Stored at 702 for 96 Hours, then subjected to controlled recovery for 1 Hr | No damage on appearance; mechanical and electrical characteristics satisfied. |
| Cold Test | Stored at -253 for 96 Hours, then subjected to controlled recovery for 1 Hr | No damage on appearance; mechanical and electrical characteristics satisfied. |
| Life Test | Without Load: 5000 cycles (insertion/extraction) at 10-25 cycles/min with mating plugs/jacks. | (1) Contact Resistance 0.1 (2) Disconnection Force 0.8 to 2.0N (3) Mechanical and electrical characteristics satisfied. |
| With Load (Rating Condition, Non-Inductive): 5000 cycles (insertion/extraction) at 10-20 cycles/min. | ||
| Temperature Cycling Test | Subjected to 5 cycles of specified temperature conditions (e.g., 70 to -20), then allowed to remain in room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion/Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: Min. 100VAC (between terminals). |
| Cold & Heat Shock Test | Subjected to 5 cycles of specified temperature conditions (e.g., 70 to -20), then allowed to remain in room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion/Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: Min. 500VAC (between terminals). |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!