Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -25℃~+85℃ |
| Locking Feature | 无锁 |
| Number of Contacts | 6P |
| Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.3mm |
| Pitch | 1mm |
| Description | -25℃~+85℃ Non-Latching 6P Double-Sided Contacts, Top and Bottom Entry 1mm SMD,P=1mm(Staggered Pins) FFC, FPC (Flat Flexible) Connector Housings RoHS |
| Mfr. Part # | 1.0-B-6PB-RML |
| Package | SMD,P=1mm(Staggered Pins) |
| Model Number | 1.0-B-6PB-RML |
View Detail Information
Explore similar products
industrial electronic component CAX CAX-AFC30-50XCB-H1.5 suitable for various
Flexible Printed Circuit Connector CAX CAX-C07-08SCB-H2.0 0.5mm Pitch FPC ZIF
Connector cable assembly CAX CAX-AFC07-16XCB-H2.0 suitable for electronic
Electronic connector model CAX CAX-AFC11-28ICB-H4.4 suitable for technical and
Product Specification
| Operating Temperature | -25℃~+85℃ | Locking Feature | 无锁 |
| Number of Contacts | 6P | Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.3mm | Pitch | 1mm |
| Description | -25℃~+85℃ Non-Latching 6P Double-Sided Contacts, Top and Bottom Entry 1mm SMD,P=1mm(Staggered Pins) FFC, FPC (Flat Flexible) Connector Housings RoHS | Mfr. Part # | 1.0-B-6PB-RML |
| Package | SMD,P=1mm(Staggered Pins) | Model Number | 1.0-B-6PB-RML |
This specification covers the 1.0mm Pitch FPC/FFC Connectors (Non-Locking type). These connectors are designed for flexible printed circuit (FPC) and flexible flat cable (FFC) applications.
| Item | Test Condition | Specification |
| Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | AC/DC (Virtual value) 50Hz | 0.5A |
| Ambient Temperature Range | -25 +85 | |
| Performance | ||
| Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 800M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (0.3mm thick FFC) | Locking: 1.5*n (N) MAX Withdrawal: 0.4*n (N) MIN |
| Terminal / Housing Retention Force | Pull the terminal at the speed rate of 253mm/minute. | 1.5N MIN |
| Environmental and Other Performance | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Appearance | No Damage | |
| Vibration | DC 1mA under energized state; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes. | Discontinuity: 1 ms MAX. Appearance: No Damage |
| Shock | DC 1mA under energized state; 490m/s{50G}, 3 strokes in each X.Y.Z. axes. | Discontinuity: 1 ms MAX. Appearance: No Damage |
| Heat Resistance | 852, 96 hours. | Contact Resistance: 60 m MAX Appearance: No Damage |
| Cold Resistance | -402, 96 hours. | Contact Resistance: 60 m MAX Appearance: No Damage |
| Humidity | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours. | Insulation Resistance: 20 M MIN Appearance: No Damage |
| Temperature Cycling | 5 cycles of: -553 (30 min) -> 852 (30 min). | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion |
| Salt Spray | 12 hours exposure to a salt spray from the 51% solution at 352. | Contact Resistance: 60 m MAX |
| SO2 Gas Resistance | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX Appearance: No Damage |
| NH3 Gas Resistance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX |
| Solderability | Soldering Time: 2.50.5 sec; Soldering Temperature: 2455; 0.2 mm from terminal tip. | Solder Wetting: 95% |
| Resistance to Soldering Heat | Soldering Time: 101sec; Soldering Temperature: 2505. | Appearance: No Damage, Deformation |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!