Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -25℃~+85℃ |
| Locking Feature | 无锁 |
| Number of Contacts | 16P |
| Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.3mm |
| Pitch | 1mm |
| Description | -25℃~+85℃ Non-Latching 16P Double-Sided Contacts, Top and Bottom Entry 1mm SMD,P=1mm(Staggered Pins) FFC, FPC (Flat Flexible) Connector Housings RoHS |
| Mfr. Part # | 1.0-B-16PB-RML |
| Package | SMD,P=1mm(Staggered Pins) |
| Model Number | 1.0-B-16PB-RML |
View Detail Information
Explore similar products
industrial electronic component CAX CAX-AFC30-50XCB-H1.5 suitable for various
Flexible Printed Circuit Connector CAX CAX-C07-08SCB-H2.0 0.5mm Pitch FPC ZIF
Connector cable assembly CAX CAX-AFC07-16XCB-H2.0 suitable for electronic
Electronic connector model CAX CAX-AFC11-28ICB-H4.4 suitable for technical and
Product Specification
| Operating Temperature | -25℃~+85℃ | Locking Feature | 无锁 |
| Number of Contacts | 16P | Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.3mm | Pitch | 1mm |
| Description | -25℃~+85℃ Non-Latching 16P Double-Sided Contacts, Top and Bottom Entry 1mm SMD,P=1mm(Staggered Pins) FFC, FPC (Flat Flexible) Connector Housings RoHS | Mfr. Part # | 1.0-B-16PB-RML |
| Package | SMD,P=1mm(Staggered Pins) | Model Number | 1.0-B-16PB-RML |
This specification covers the 1.0mm Pitch FPC/FFC Connectors (series Locking), designed for dual-sided connection. These connectors are rated for a maximum voltage of 50V and a maximum current of 0.5A (AC/DC, virtual value 50Hz), operating within an ambient temperature range of -25 to +85.
| Item | Test Condition | Specification | Requirement |
| 4.1 Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 800M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1minute between adjacent terminal or ground. | No Breakdown | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking: 1.5*n (N) MAX Withdrawal: 0.4*n (N) MIN | |
| Terminal /Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 1.5N MIN | |
| 4.3 Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX | |
| Temperature Rise | Carrying rated current load. (UL 498) | Temperature Rise: 30 MAX | |
| Appearance | No Damage | ||
| Contact Resistance | 60 m MAX | ||
| Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes | Discontinuity: 1 ms MAX. | |
| Appearance | No Damage | ||
| Shock | 490m/s{50G}, 3 strokes in each X.Y.Z. axes. | Discontinuity: 1 ms MAX. | |
| Appearance | No Damage | ||
| Heat Resistance | 852, 96 hour | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Cold Resistance | -402, 96 hour | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Humidity | Temperature: 402 Relative Humidity: 90-95% Duration: 96 Hours | Insulation Resistance: 20 M MIN Appearance: No Damage | |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes b) 852 30 minutes | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion | |
| Salt Spray | 12 hours exposure to a salt spray from the 51% solution at 352. | Contact Resistance: 60 m MAX | |
| SO2 Gas | 24 hours exposure to 505ppm. SO2 gas at 402. | Contact Resistance: 60 m MAX Appearance: No Damage | |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution | Contact Resistance: 60 m MAX | |
| Solder ability | Soldering Time: 2.50.5 sec. Soldering Temperature: 2455 0.2 mm from terminal tip | Solder Wetting: 95% or more coverage | |
| Resistance to Soldering heat | Soldering Time: 101sec. Soldering Temperature: 2505 | Appearance: No Damage, Deformation | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!