Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -25℃~+85℃ |
| Locking Feature | 无锁 |
| Number of Contacts | 22P |
| Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.3mm |
| Pitch | 1mm |
| Description | -25℃~+85℃ Non-Latching 22P Double-Sided Contacts, Top and Bottom Entry 1mm SMD,P=1mm(Staggered Pins) FFC, FPC (Flat Flexible) Connector Housings RoHS |
| Mfr. Part # | 1.0-B-22PB-RML |
| Package | SMD,P=1mm(Staggered Pins) |
| Model Number | 1.0-B-22PB-RML |
View Detail Information
Explore similar products
industrial electronic component CAX CAX-AFC30-50XCB-H1.5 suitable for various
Flexible Printed Circuit Connector CAX CAX-C07-08SCB-H2.0 0.5mm Pitch FPC ZIF
Connector cable assembly CAX CAX-AFC07-16XCB-H2.0 suitable for electronic
Electronic connector model CAX CAX-AFC11-28ICB-H4.4 suitable for technical and
Product Specification
| Operating Temperature | -25℃~+85℃ | Locking Feature | 无锁 |
| Number of Contacts | 22P | Contact Type | 双侧触点/上下接 |
| FFC, FCB Thickness | 0.3mm | Pitch | 1mm |
| Description | -25℃~+85℃ Non-Latching 22P Double-Sided Contacts, Top and Bottom Entry 1mm SMD,P=1mm(Staggered Pins) FFC, FPC (Flat Flexible) Connector Housings RoHS | Mfr. Part # | 1.0-B-22PB-RML |
| Package | SMD,P=1mm(Staggered Pins) | Model Number | 1.0-B-22PB-RML |
This specification covers the 1.0mm Pitch FPC/FFC Connectors (series locking, dual-sided connection). Designed for flexible flat cable connections, these connectors offer reliable electrical and mechanical performance for various applications.
| Item | Specification | Test Condition | Requirement |
|---|---|---|---|
| Ratings | Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | [AC/DC(Virtual value)50Hz] | 0.5A | |
| Ambient Temperature Range | -25 +85 | ||
| Electrical Performance | Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 800 M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | |
| Mechanical Performance | Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking: 1.5*n (N) MAX, Withdrawal: 0.4*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 1.5N MIN | |
| Repeated Insertion and Withdrawal | Contact Resistance | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | 60 m MAX |
| Appearance | No Damage | ||
| Temperature Rise | Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Appearance | No Damage | ||
| Vibration | Discontinuity | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X.Y.Z. axes, DC 1mA energized. | 1 ms MAX |
| Appearance | No Damage | ||
| Shock | Discontinuity | 490m/s{50G}, 3 strokes in each X.Y.Z. axes, DC 1mA energized. | 1 ms MAX |
| Appearance | No Damage | ||
| Heat Resistance | Contact Resistance | 852, 96 hours, then return to room temperature for 1-2 hours. | 60 m MAX |
| Appearance | No Damage | ||
| Cold Resistance | Contact Resistance | -402, 96 hours, then return to room temperature for 1-2 hours. | 60 m MAX |
| Appearance | No Damage | ||
| Humidity | Insulation Resistance | 402, 90-95% RH, 96 hours, then measure within 0.5 hours at room temperature. | 20 M MIN |
| Contact Resistance | 60 m MAX | ||
| Appearance | No Damage | ||
| Temperature Cycling | Contact Resistance | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at room temperature between cycles. | 60 m MAX |
| Appearance | No Damage, Corrosion | ||
| Salt Spray | Contact Resistance | 12 hours exposure to a salt spray from the 51% solution at 352. Post-test wash with tap water and dry at room temperature. | 60 m MAX |
| Appearance | No Damage | ||
| SO2 Gas Resistance | Contact Resistance | 24 hours exposure to 505ppm SO2 gas at 402. | 60 m MAX |
| Appearance | No Damage | ||
| NH3 Gas Resistance | Contact Resistance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | 60 m MAX |
| Appearance | No Damage | ||
| Solderability | Solder Wetting | Soldering Time: 2.50.5 sec, Soldering Temperature: 2455, 0.2 mm from terminal tip. | 95% coverage |
| Appearance | No Damage | ||
| Resistance to Soldering Heat | Appearance | Soldering Time: 101sec, Soldering Temperature: 2505. | No Damage, Deformation |
| Contact Resistance | 60 m MAX |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!