Shenzhen ECER Network Technology Co., Ltd.
| Pins Structure | 1x4P |
| Contact Plating | 锡 |
| Pitch | 0.8mm |
| Contact Material | 磷铜;LCP |
| Voltage Rating (Max) | 50V |
| Number of PINs Per Row | 4 |
| Number of Rows | 1 |
| X-Length of Bottom Edge on Board (Spacing Line) | 5.46mm |
| Mounting Type | 卧贴 |
| Operating Temperature | -25℃~+85℃ |
| Description | 1x4P Tin 0.8mm 50V 4 1 Surface Mount, Right Angle -25℃~+85℃ SMD,P=0.8mm,Surface Mount,Right Angle Headers, Male Pins RoHS |
| Mfr. Part # | W-0800M04P-R000 |
| Package | SMD,P=0.8mm,Surface Mount,Right Angle |
| Model Number | W-0800M04P-R000 |
View Detail Information
Explore similar products
Precision wafer connector HDGC HDGC1254WR-S-6P featuring 1.25MM pitch and 90
PCB layout part HCTL HC-0.8-6PLT designed for temperature range minus 25 to plus
2.54mm Pitch Single Row Pin Header Connector OUPIIN 2011H-1X40G01SB Straight
PCB mount horizontal SMT connector 1.0mm pitch JUSHUO SHB10-S03DCA-00 with
Product Specification
| Pins Structure | 1x4P | Contact Plating | 锡 |
| Pitch | 0.8mm | Contact Material | 磷铜;LCP |
| Voltage Rating (Max) | 50V | Number of PINs Per Row | 4 |
| Number of Rows | 1 | X-Length of Bottom Edge on Board (Spacing Line) | 5.46mm |
| Mounting Type | 卧贴 | Operating Temperature | -25℃~+85℃ |
| Description | 1x4P Tin 0.8mm 50V 4 1 Surface Mount, Right Angle -25℃~+85℃ SMD,P=0.8mm,Surface Mount,Right Angle Headers, Male Pins RoHS | Mfr. Part # | W-0800M04P-R000 |
| Package | SMD,P=0.8mm,Surface Mount,Right Angle | Model Number | W-0800M04P-R000 |
SUH0.8 is a 0.8mm pitch pressure-type bar connector designed for wire-to-board connections. It offers a rated voltage of 50V and a rated current of 0.5A, suitable for wires with an outer diameter of 0.5-0.6mm (AWG#30, AWG#32). The operating temperature range is -25 to +85.
| Item | Specification | Requirement |
| Ratings and Applicable Wires | ||
| Rated Voltage (MAX) | [AC(rms)/DC] | 50V |
| Insulation O.D. | 0.5-0.6mm | |
| Rated Current (MAX) | AWG#30 | 0.5A |
| Rated Current (MAX) | AWG#32 | 0.5A |
| Ambient temperature Range | -25 +85 | |
| Performance - Electrical | ||
| Contact Resistance | Measure by dry circuit, 20mV MAX, 10mA | 20 milliohms MAX |
| Insulation Resistance | Apply 100V DC between adjacent terminal or ground | 100 Megohms MIN |
| Dielectric Strength | Apply 200V AC(rms) for 1 minute between adjacent terminal or ground | No Breakdown |
| Contact Resistance On Crimped Portion | Measure by dry circuit, 20mV MAX, 10mA | 5 milliohoms MAX |
| Performance - Mechanical | ||
| Contact Retention Force (Min.) | Apply axial pull out force at a speed of 253mm/minute | 4-7N MIN |
| Terminal /Housing Retention Force | Apply axial pull out force at a speed of 253mm/minute | 4-7N MIN |
| Contact Insertion Force | Insert and withdraw connectors with hand | 1-2N/PIN |
| Contact Withdrawal Force | Insert and withdraw connectors with hand | 0.3N/PIN |
| Performance - Environmental and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute | Contact Resistance: 60 mMAX |
| Temperature Rise | Carrying rated current load (UL 498) | 30 MAX |
| Vibration | DC 1mA, Amplitude: 5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X,Y,Z axes | Appearance: No Damage, Contact Resistance: 60 mMAX, Discontinuity: 1 ms.MAX. |
| Shock | DC 1mA, 490m/s{50G}, 3 strokes in each X,Y,Z axes | Appearance: No Damage, Discontinuity: 1 ms.MAX. |
| Heat Resistance | 852, 96 hours, then return to room temperature for 1-2 hours | Appearance: No Damage, Contact Resistance: 60 mMAX |
| Cold Resistance | -402, 96 hours, then return to room temperature for 1-2 hours | Appearance: No Damage, Contact Resistance: 60 mMAX |
| Humidity | Temperature: 402, Relative Humidity: 90-94%, Duration: 96 Hours, then measure at room temperature within 0.5 hours | Appearance: No Damage, Contact Resistance: 60 mMAX, Dielectric Strength: Must meet 4.1.3, Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: a) -253 30 minutes b) 852 30 minutes | Appearance: No Damage, Contact Resistance: 60 mMAX |
| Salt Spray | 24 hours exposure to a salt spray from 51% solution at 352. After test, wash with room temperature water and dry at room temperature. | Appearance: No Damage, Corrosion, Contact Resistance: 60 mMAX |
| SO2 Gas Resistance | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 mMAX |
| NH3 Gas Resistance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage, Contact Resistance: 60 mMAX |
| Solderability | Soldering Time: 20.5 sec, Soldering Temperature: 2355, 0.2 mm from terminal tip | Solder Wetting Apply Area: More Than 95% |
| Resistance to Soldering Heat | Soldering Time: 50.5 sec, Soldering Temperature: 2555, 0.2 mm from terminal tip | Appearance: No Damage, Deformation |
| Conditions for Soldering (Pb-free) | ||
| Pre-heating Average temperature gradient | 2.5C/s | |
| Soak time (tsoak) | Time above 150C (T1) | 2-3 minutes |
| Time above 180C (T2) | 60s | |
| Time above 250C (T3) | 50s | |
| Peak temperature in reflow (Tpeak) | 2-5s | |
| Cooling Temperature gradient | 255C (0/+5C) Max -5C/s | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!