Hefei Purple Horn E-Commerce Co., Ltd.
| Pins Structure | 1x4P |
| Contact Plating | 锡 |
| Pitch | 0.8mm |
| Contact Material | 磷铜;LCP |
| Voltage Rating (Max) | 50V |
| Number of PINs Per Row | 4 |
| Number of Rows | 1 |
| Z-Height of the Board | 2.75mm |
| Mounting Type | 立贴 |
| Operating Temperature | -25℃~+85℃ |
| Description | 1x4P Tin 0.8mm 50V 4 1 Surface Mount,Vertical -25℃~+85℃ SMD,P=0.8mm Headers, Male Pins RoHS |
| Mfr. Part # | W-0800N04P-R000 |
| Package | SMD,P=0.8mm |
| Model Number | W-0800N04P-R000 |
View Detail Information
Explore similar products
Precision wafer connector HDGC HDGC1254WR-S-6P featuring 1.25MM pitch and 90
PCB layout part HCTL HC-0.8-6PLT designed for temperature range minus 25 to plus
2.54mm Pitch Single Row Pin Header Connector OUPIIN 2011H-1X40G01SB Straight
PCB mount horizontal SMT connector 1.0mm pitch JUSHUO SHB10-S03DCA-00 with
Product Specification
| Pins Structure | 1x4P | Contact Plating | 锡 |
| Pitch | 0.8mm | Contact Material | 磷铜;LCP |
| Voltage Rating (Max) | 50V | Number of PINs Per Row | 4 |
| Number of Rows | 1 | Z-Height of the Board | 2.75mm |
| Mounting Type | 立贴 | Operating Temperature | -25℃~+85℃ |
| Description | 1x4P Tin 0.8mm 50V 4 1 Surface Mount,Vertical -25℃~+85℃ SMD,P=0.8mm Headers, Male Pins RoHS | Mfr. Part # | W-0800N04P-R000 |
| Package | SMD,P=0.8mm | Model Number | W-0800N04P-R000 |
This specification applies to 0.8mm spacing pressure type bar connectors (SUH0.8). These connectors are designed for wire-to-board connections.
| Item | Requirement | Test Condition | Specification |
|---|---|---|---|
| 1. Ratings and Applicable Wires | |||
| Rated Voltage (MAX) | 50V [AC(rms)/DC] | ||
| Insulation O.D. | 0.5-0.6mm | ||
| Rated Current (MAX) | AWG#30: 0.5A, AWG#32: 0.5A | ||
| Ambient temperature Range | -25 +85 | ||
| 2. Performance | |||
| Contact Resistance | 20 milliohms MAX | Dry circuit, 20mV MAX, 10mA | |
| 5 milliohms MAX (Crimped Portion) | Dry circuit, 20mV MAX, 10mA | ||
| Insulation Resistance | 100 Megohms MIN | 100V DC between adjacent terminals or ground | |
| Dielectric Strength | No Breakdown | 200V AC (rms) for 1 minute between adjacent terminals or ground | |
| Contact Retention Force (Min.) | 4-7N MIN | Axial pull out at 253mm/minute | |
| Terminal/Housing Retention Force (Min.) | 4-7N MIN | Axial pull out at 253mm/minute | |
| Contact Insertion Force | 1-2N/PIN | Insert with hand | |
| Contact Withdrawal Force | 0.3N/PIN | Withdraw with hand | |
| 3. Environmental and Other Performance | |||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 mMAX | 20 cycles at < 10 cycle/minute (No power) | |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498) | |
| Vibration | Appearance: No Damage | Amplitude: 5mm P-P, Sweep: 10-55-10Hz/min, Duration: 2 hours in each X,Y,Z axes (DC 1mA) | |
| Contact Resistance: 60 mMAX | |||
| Discontinuity: 1 ms.MAX. | |||
| Shock | Appearance: No Damage | 490m/s {50G}, 3 strokes in each X,Y,Z axes (DC 1mA) | |
| Discontinuity: 1 ms.MAX. | |||
| Heat Resistance | Appearance: No Damage | 852, 96 hours, then room temp 1-2 hours | |
| Contact Resistance: 60 mMAX | |||
| Cold Resistance | Appearance: No Damage | -402, 96 hours, then room temp 1-2 hours | |
| Contact Resistance: 60 mMAX | |||
| Humidity | Appearance: No Damage | 402, 90-94% RH, 96 hours, then room temp 0.5 hours | |
| Contact Resistance: 60 mMAX | |||
| Dielectric Strength | Must meet 4.1.3 | Temp: 402, RH: 90-94%, Duration: 96 Hours | |
| Insulation Resistance | 20 M MIN | Temp: 402, RH: 90-94%, Duration: 96 Hours | |
| Temperature Cycling | Appearance: No Damage | 5 cycles of: a) -253 30 min b) 852 30 min (with room temp transitions) | |
| Contact Resistance: 60 mMAX | |||
| Salt Spray | Appearance: No Damage, Corrosion | 24 hours exposure to 51% salt spray at 352. Rinse with water, dry at room temp. | |
| Contact Resistance: 60 mMAX | |||
| SO2 Gas Resistance | Contact Resistance: 60 mMAX | 24 hours exposure to 505ppm SO2 gas at 402. | |
| NH3 Gas Resistance | Appearance: No Damage | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | |
| Contact Resistance: 60 mMAX | |||
| Solderability | Solder Wetting: More Than 95% Apply Area | Soldering Time: 20.5 sec, Temp: 2355, 0.2 mm from terminal tip | |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 50.5 sec, Temp: 2555, 0.2 mm from terminal tip | |
| 4. Conditions for Soldering (Pb-free) | |||
| Parameter | Specification | Reference | |
| Average temperature gradient in preheating | 2.5C/s | ||
| Soak time tsoak | 2-3 minutes | Time above 150C (T1) | 60s |
| Time above 180C (T2) | 50s | ||
| Time above 250C (T3) | 2-5s | ||
| Peak temperature in reflow (Tpeak) | 255C (0/+5C) | ||
| Temperature gradient in cooling | Max -5C/s | ||
| 230C MIN | 2010 sec | ||
| Pre-Heat | 9030 sec | ||
| 5. Product Shape, Dimensions and Materials | |||
| NAME | MATERIALS | REMARK | |
| Housing | LCP (Natural Color) | ||
| Contact | Phosphor Copper | Metal surface nickel base, high tin | |
| Welding Slice | Phosphor Copper | Metal surface nickel base, high tin | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
<300
Ecer Certification：
Verified Supplier
Hefei Purple Horn E-Commerce Co., Ltd. is a professional company focus on integrated circuit ic business. Hefei Purple Horn E-Commerce Co., Ltd. will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Fou... Hefei Purple Horn E-Commerce Co., Ltd. is a professional company focus on integrated circuit ic business. Hefei Purple Horn E-Commerce Co., Ltd. will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Fou...
Get in touch with us
Leave a Message, we will call you back quickly!