Shenzhen ECER Network Technology Co., Ltd.
| Locking Feature | 抽屉式 |
| Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 12P |
| Contact Type | 上接 |
| FFC, FCB Thickness | 0.3mm |
| Pitch | 1mm |
| Description | FFC/FPC Connector 12 Position 1mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃ |
| Mfr. Part # | CAX-AFA07-12SCB-H2.5 |
| Package | SMD,P=1mm,Surface Mount,Right Angle |
| Model Number | CAX-AFA07-12SCB-H2.5 |
View Detail Information
Explore similar products
industrial electronic component CAX CAX-AFC30-50XCB-H1.5 suitable for various
Flexible Printed Circuit Connector CAX CAX-C07-08SCB-H2.0 0.5mm Pitch FPC ZIF
Connector cable assembly CAX CAX-AFC07-16XCB-H2.0 suitable for electronic
Electronic connector model CAX CAX-AFC11-28ICB-H4.4 suitable for technical and
Product Specification
| Locking Feature | 抽屉式 | Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 12P | Contact Type | 上接 |
| FFC, FCB Thickness | 0.3mm | Pitch | 1mm |
| Description | FFC/FPC Connector 12 Position 1mm Pitch Top Contact Surface Mount, Right Angle -25℃~+85℃ | Mfr. Part # | CAX-AFA07-12SCB-H2.5 |
| Package | SMD,P=1mm,Surface Mount,Right Angle | Model Number | CAX-AFA07-12SCB-H2.5 |
This specification covers the 1.0mm Pitch H=2.5 FPC/FFC ZIF R/A Type K SMT Connectors series. These connectors are designed for applications requiring a 1.0mm pitch with a height of 2.5mm, featuring a right-angle (R/A) surface mount (SMT) configuration with a pull tab (K type) for FPC/FFC insertion and extraction. They are suitable for both small batch (tube packaging) and bulk (reel packaging) requirements.
| Category | Item | Specifications | Test Condition |
|---|---|---|---|
| Ratings | Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | ||
| Operating Temperature Range | -55C ~ +85C | ||
| Operating Humidity Range | Relative humidity 90% max. | ||
| Storage Temperature Range | -40C ~ +50C | ||
| Storage Humidity Range | Relative humidity 90% max. | ||
| Note on Temperature Rise | Including terminal temperature rise | ||
| Electrical Performance | Contact Resistance | 40 m Max. | Mate applicable FPC/FFC and measure by dry circuit, 20mV Max, 100mA. (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. (EIA-364-21) | |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC ,apply 250V AC(rms) for 1 minute between adjacent terminal or ground.(EIA-364-20) | |
| Mechanical Performance | FPC Retention Force | Pos.x 0.40N Min. | Insert the Latch, pull the FPC at a rate of 253mm per minute. (EIA-364-13) |
| Terminal Retention Force | 3.0N Min. | Apply axial pull out force at the rate of 253 mm/minute on the terminal assembled in the housing. (EIA-364-29) | |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force at the rate of 253 mm/minute on the Fitting Nail assembled in the housing. (EIA-364-29) | |
| Environmental Performance | Durability | Contact Resistance: 60m Max. | Insert and withdraw actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. (EIA-364-09) |
| Temperature Rise | 30C Max. | Mate applicable FPC/FFC and measure the temperature rise of contact when the maximum AC rated current is passed. (EIA-364-70 Method 2) | |
| Vibration | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate connectors and subject to the following vibration conditions, for period of 2 hours in each of 3 mutually perpendicular axes, passing DC 100mA during the test. Amplitude : 1.5mm P-P Frequency : 105510 Hz in 1 minute. Duration : 2 hours in each of X,Y,Z axes. (EIA-364-28 Condition I) | |
| Shock | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate applicable FPC/FFC and subject to the following shock conditions. 3 times of shocks shall be applied for each 6 directions along 3 mutually perpendicular axes, passing DC 100 mA current during the test. (Total of 18 shocks) Peak value : 490m/s2 {50G} (EIA-364-27, Test condition A) | |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC/FFC and expose to 852C for 96 hours. Upon completion of the exposure period, the test specimens shall be conditioned at ambient room conditions for 1 to 2 hours, after which the specified measurements shall be performed. (EIA-364-17) | |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC/FFC and expose to -402C for 96 hours. Upon completion of the exposure period, the test specimens shall be conditioned at ambient room conditions for 1 to 2 hours, after which the specified measurements shall be performed. (EIA-364-59) | |
| Humidity | Appearance: No Damage Contact Resistance: 60m Max. Dielectric Strength: No Breakdown Insulation Resistance: 20 M Min. | Mate applicable FPC/FFC and expose to 40 2C, relative humidity 90 to 95% for 96 hours. Upon completion of the exposure period, the test specimens shall be conditioned at ambient room conditions for 1 to 2 hours, after which the specified measurements shall be performed. (EIA-364-31) | |
| Thermal Shock | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC/FFC and subject to the following conditions for 5 cycles. Upon completion of the exposure period, the test specimens shall be conditioned at ambient room conditions for 1 to 2 hours, after which the specified measurements shall be performed. 1 cycle a) -553C 30minutes b) +853C 30minutes (EIA-364-32) | |
| Salt Spray | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC/FFC and expose to the following salt mist conditions. Upon completion of the exposure period, salt deposits shall be removed by a gentle wash or dip in running water, after which the specified measurements shall be performed. NaCl solution Concentration : 5 1% Gold plating: 12u " Spray time : 24 4 hours Gold plating: 3u "and above Spray time : 48 4 hours Ambient temperature : 35 2C (EIA-364-26) | |
| Solderability | 95% of immersed area must show no voids, pin holes. | Tip of solder tails and fitting nails into the molten solder (held at 2455C) up to 0.1mm from the bottom of the housing for 30.5 seconds. (EIA-364-52) | |
| Soldering Heat Resistance | Appearance: No Damage | Soldering iron method 0.2mm from terminal tip and fitting nail tip. Soldering time : 5 seconds Max. Solder temperature : 370400C. (EIA-364-56) |
Temperature Condition Graph (Temperature on Board Pattern Side):
Note: Refer to paragraph 7 for reflowing conditions.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!