Shenzhen ECER Network Technology Co., Ltd.
| Locking Feature | 抽屉式 |
| Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 22P |
| Contact Type | 下接 |
| FFC, FCB Thickness | 0.3mm |
| Pitch | 1mm |
| Description | FFC/FPC Connector 22 Position 1mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃ |
| Mfr. Part # | CAX-AFA07-22XCB-H2.5 |
| Package | SMD,P=1mm,Surface Mount,Right Angle |
| Model Number | CAX-AFA07-22XCB-H2.5 |
View Detail Information
Explore similar products
industrial electronic component CAX CAX-AFC30-50XCB-H1.5 suitable for various
Flexible Printed Circuit Connector CAX CAX-C07-08SCB-H2.0 0.5mm Pitch FPC ZIF
Connector cable assembly CAX CAX-AFC07-16XCB-H2.0 suitable for electronic
Electronic connector model CAX CAX-AFC11-28ICB-H4.4 suitable for technical and
Product Specification
| Locking Feature | 抽屉式 | Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 22P | Contact Type | 下接 |
| FFC, FCB Thickness | 0.3mm | Pitch | 1mm |
| Description | FFC/FPC Connector 22 Position 1mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃ | Mfr. Part # | CAX-AFA07-22XCB-H2.5 |
| Package | SMD,P=1mm,Surface Mount,Right Angle | Model Number | CAX-AFA07-22XCB-H2.5 |
This specification covers the 1.0mm Pitch H=2.5 FPC/FFC ZIF R/A Type K SMT Connectors series. Designed for reliable connections, these connectors are suitable for applications requiring a 1.0mm pitch and a height of 2.5mm. They are manufactured by Zhejiang Chuang Du Electronics Co., Ltd. and are available in tube packaging for small quantities or reel packaging for bulk orders.
| Item | Specifications | Test Condition |
|---|---|---|
| Ratings | ||
| Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | |
| Operating Temperature Range | -55C to +85C | |
| Operating Humidity Range | 90% RH Max. | |
| Storage Temperature Range | -40C to +50C | |
| Storage Humidity Range | 90% RH Max. | |
| Electrical Performance | ||
| Contact Resistance | 40 m Max. | Mate applicable FPC/FFC, test voltage 20mV, current 100mA (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC/FFC, apply 500V DC between adjacent terminals or ground (EIA-364-21) |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC, apply 250V AC (rms) for 1 minute between adjacent terminals or ground (EIA-364-20) |
| Mechanical Performance | ||
| FPC Retention Force | Pos. x 0.40N Min. | Insert Latch, pull FPC at 253mm/min (EIA-364-13) |
| Terminal Retention Force | 3.0N Min. | Apply axial pull out force on terminal assembled in housing at 253mm/min (EIA-364-29) |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force on Fitting Nail assembled in housing at 253mm/min (EIA-364-29) |
| Environmental Performance and Others | ||
| Durability | Contact Resistance: 60m Max. | Insert and withdraw actuator up to 20 cycles at <10 cycles> |
| Temperature Rise | 30C Max. | Measure temperature rise of contact when max rated current passed through FPC/FFC (EIA-364-70 Method 2) |
| Vibration | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Apply DC 100mA, 1.5mm displacement, 10~55~10 Hz for 2 hours in X,Y,Z axes (EIA-364-28 Condition I) |
| Shock | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Apply DC 100mA, 490m/s {50G} shock in 6 directions along 3 axes, 3 times each (EIA-364-27, Test condition A) |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Expose to 852C for 96 hours, then condition at room temp for 1-2 hours (EIA-364-17) |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Expose to -402C for 96 hours, then condition at room temp for 1-2 hours (EIA-364-59) |
| Humidity | Appearance: No Damage Contact Resistance: 60m Max. Dielectric Strength: No Breakdown Insulation Resistance: 20 M Min. | Expose to 402C, 90-95% RH for 96 hours, then condition at room temp for 1-2 hours (EIA-364-31) |
| Thermal Shock | Appearance: No Damage Contact Resistance: 60m Max. | Subject to 5 cycles of -553C (30 min) and +853C (30 min), then condition at room temp for 1-2 hours (EIA-364-32) |
| Salt Spray | Appearance: No Damage Contact Resistance: 60m Max. | NaCl solution 51% conc., 352C. 244 hrs for 1-2u" gold plating, 484 hrs for 3u" gold plating. Rinse and dry after test (EIA-364-26) |
| Solderability | Solder Wetting: 95% Min. wetting area, no voids/pinholes. | Immersion at 2455C for 30.5 sec, 0.1mm from housing bottom (EIA-364-52) |
| Resistance to Soldering Heat | Appearance: No Damage | Soldering iron method: 370-400C, 5 sec Max. at 0.2mm from terminal/nail tip (EIA-364-56) |
Temperature on Board Pattern Side:
(Refer to graph for detailed temperature profile)
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!