Shenzhen ECER Network Technology Co., Ltd.
| Locking Feature | 翻盖式 |
| Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 6P |
| Contact Type | 下接 |
| FFC, FCB Thickness | 0.3mm |
| Pitch | 1mm |
| Description | Hinged Lid -25℃~+85℃ 6P Bottom Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS |
| Mfr. Part # | 1.0-6P XGXJ-H2.0 |
| Package | SMD,P=1mm,Surface Mount,Right Angle |
| Model Number | 1.0-6P XGXJ-H2.0 |
View Detail Information
Explore similar products
industrial electronic component CAX CAX-AFC30-50XCB-H1.5 suitable for various
Flexible Printed Circuit Connector CAX CAX-C07-08SCB-H2.0 0.5mm Pitch FPC ZIF
Connector cable assembly CAX CAX-AFC07-16XCB-H2.0 suitable for electronic
Electronic connector model CAX CAX-AFC11-28ICB-H4.4 suitable for technical and
Product Specification
| Locking Feature | 翻盖式 | Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 6P | Contact Type | 下接 |
| FFC, FCB Thickness | 0.3mm | Pitch | 1mm |
| Description | Hinged Lid -25℃~+85℃ 6P Bottom Contact 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS | Mfr. Part # | 1.0-6P XGXJ-H2.0 |
| Package | SMD,P=1mm,Surface Mount,Right Angle | Model Number | 1.0-6P XGXJ-H2.0 |
This specification covers the 1.0mm Pitch FPC Connectors, designed for flexible flat cable connections. They are suitable for applications requiring reliable electrical and mechanical performance, with a focus on durability and environmental resistance. The connectors are manufactured by Shenzhen Shouhan Technology Co., Ltd.
| Item | Requirement | Test Condition |
|---|---|---|
| 3RATINGS | ||
| Rated Voltage (MAX) | 50V [AC/DC (effective value) 50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient temperature Range | -25 ~ +85 | |
| 4PERFORMANCE | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (effective value) for 1 minute between adjacent terminal or ground. |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at the speed rate of 253mm/minute. |
| Terminal / Housing Retention Force | 0.25N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz in 1 minute, Duration: 2 hours in each X,Y,Z axes. (DC 1mA) |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX. | 490m/s {50G}, 3 strokes in each X,Y,Z axes. (DC 1mA) |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 852, 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | -402, 96 hours, then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours, then measure within 0.5 hours at room temperature. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at normal temperature and humidity between cycles. |
| Salt Spray | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX | 48 4 hours exposure to a salt spray from the 51% solution at 352. Post-test: rinse with water and dry at room temperature. |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 50 5ppm. SO2 gas at 402. |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder ability | Solder Wetting: 95% or more coverage area. | Soldering Time: 20.5 sec. Soldering Temperature: 2455 at 0.2 mm from terminal tip. |
| Resistance to Soldering heat | Appearance: No Damage, Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455, at least 5 times. |
Note: ( ) : Reference Standard, { } : Reference Unit
Dimensions: Subject to the drawing.
Contact Information:
SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
Tel: 0755-27597601
Fax: 0755-27597491
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!