Shenzhen ECER Network Technology Co., Ltd.
| Number of Contacts | 16P |
| length | 7.35mm |
| Detection color | 黑色 |
| Operating temperature | -30℃~+80℃ |
| Connector Type | Type-C |
| Connect-Disconnect Life | 1.5千次 |
| Description | 16P Type-C SMD USB, DVI, HDMI Connector Adapters RoHS |
| Mfr. Part # | FG-ST-C-TF1-16P-7.35 |
| Package | SMD |
| Model Number | FG-ST-C-TF1-16P-7.35 |
View Detail Information
Explore similar products
High Precision FG FG-ST-C-24P-RAT-7.9 Connector Engineered for Industrial and
Vertical HDMI A Type Connector HH HDMI AF002 with Gold Finished Contacts and
electrical connector HH HH-USB-SMT-201 with UL 94V-0 rated PBT LCP housing and
HH HH 6P TYPE C Y059 Type C Female Connector 6 Pin with Multiple Plating Options
Product Specification
| Number of Contacts | 16P | length | 7.35mm |
| Detection color | 黑色 | Operating temperature | -30℃~+80℃ |
| Connector Type | Type-C | Connect-Disconnect Life | 1.5千次 |
| Description | 16P Type-C SMD USB, DVI, HDMI Connector Adapters RoHS | Mfr. Part # | FG-ST-C-TF1-16P-7.35 |
| Package | SMD | Model Number | FG-ST-C-TF1-16P-7.35 |
This specification covers the requirements for product performance and test methods for USB C TYPE plug and receptacle connectors. Designed for reliable connectivity, these connectors are built to meet stringent industry standards.
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| General Specifications | |||
| 3-1 | Voltage Rating | 5 V AC (rms) | |
| 3-2 | Temperature Range | Storage: -20C to +60C; Operating: -30C to +80C | |
| Nominal Temperature | +20C | ||
| Test Conditions | |||
| 4-1 | General Test Conditions | All tests shall be performed as below conditions unless otherwise specified. | |
| 4-2 | Temperature Range | +15C to +35C | |
| 4-3 | Humidity Range | 25% to 85% | |
| Product Appearance | |||
| 5-1 | Examination of Product | EIA364-18 | Outward appearance shall be good without injurious problems and structure shall meet design and dimension requirements. |
| Mechanical Performance | |||
| 6-1 | Insertion Force | EIA 364-13 | Max. rate of 12.5mm/min. Range: 5N - 20N |
| 6-2 | Extraction Force | EIA 364-13 | Max. rate of 12.5mm/min. Range: 8N - 20N |
| 6-3 | Durability | EIA 364-09 | 1500 cycles at a rate of 200 cycles/hour. Requirements after test: Contact resistance ( 40m, delta 10m), Insertion force (5N-20N), Extraction force (8N-20N), Visual inspection (no exposed base metal on contacts). |
| 6-4 | Cable Flexing | EIA 364-41 | 100 cycles in each of 2 planes, 120 degrees. x=3.7 x cable diameter. No discontinuity over 1 microsecond. |
| 6-5 | Cable Pull-Out | EIA-364-38 | 40N steady state axial load for 1 minute. No discontinuity or physical damage. Tested at 0, 90, 180, 270 directions. |
| 6-6 | 4-axes continuity test | EIA364-18 | 105C without applied voltage for 120 hours (preconditioning in EIA 364-1000.01). Visual inspection. |
| Electrical Performance | |||
| 7-1 | Insulation Resistance | EIA 364-21C | Apply 100V DC between adjacent terminals or ground. 500m minimum (unmated) between adjacent contacts and contacts and shell. |
| 7-2 | Low Level Contact Resistance | EIA 364-23b | 20mV Max. open circuit at 100mA Max. Initial: 40m (Max) for VBUS/GND, delta 10m (Max) after test. |
| 7-3 | Dielectric Withstanding Voltage | EIA 364-20 | 100VAC (RMS) for 1 minute between adjacent terminals. No breakdown. |
| 7-4 | Contact Current Rating | EIA364-70 | 5.0A for VBUS pins, 1.25A for VCONN pin, 0.25A for other contacts. Temperature rise shall not exceed 30C at 25C ambient. |
| Environmental Performance | |||
| 8-1 | Temperature Life | EIA 364-17 | 105C without applied voltage for 120 hours. Visual inspection. |
| 8-2 | Thermal Shock | EIA 364-32 | 10 Cycles: -55C to +85C. Mated connectors. No physical damage. |
| 8-3 | Salt Spray | MIL-STD-202F, Method 101D, Test Condition B | 24 hours at 35C with 5% Salt-solution. Shall meet visual requirement, no physical damage. |
| 8-4 | Cyclic Temperature and Humidity | EIA 364-31 | Cycles between 25C/80%RH and 65C/50%RH. Ramp: 0.5 hour, Dwell: 1.0 hour. 24 cycles. Visual inspection. |
| 8-5 | Solder ability | EIA 364-52 | Immersion at 260C +/-5C for 5s. Solder shall cover minimum 95% of immersed surface. |
| 8-6 | Resistance to Reflow Soldering Heat | EIA 364-17A | Condition 3, Method A: 80C for 250 hours. No damage. |
| 8-7 | Temperature Life | EIA 364-17 | Condition 3, Method A: 80C for 250 hours. Shall meet visual requirement, no physical damage. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!