Shenzhen ECER Network Technology Co., Ltd.
| Protocol Standard | USB 3.1 |
| length | 14.3mm |
| Operating temperature | -40℃~+85℃ |
| Connector Type | Type-C |
| Connect-Disconnect Life | 1万次 |
| Description | USB 3.1 Type-C SMD USB, DVI, HDMI Connector Adapters RoHS |
| Mfr. Part # | FG-ST-C-24P-CL03-14.3 |
| Package | SMD |
| Model Number | FG-ST-C-24P-CL03-14.3 |
View Detail Information
Explore similar products
High Precision FG FG-ST-C-24P-RAT-7.9 Connector Engineered for Industrial and
Vertical HDMI A Type Connector HH HDMI AF002 with Gold Finished Contacts and
electrical connector HH HH-USB-SMT-201 with UL 94V-0 rated PBT LCP housing and
HH HH 6P TYPE C Y059 Type C Female Connector 6 Pin with Multiple Plating Options
Product Specification
| Protocol Standard | USB 3.1 | length | 14.3mm |
| Operating temperature | -40℃~+85℃ | Connector Type | Type-C |
| Connect-Disconnect Life | 1万次 | Description | USB 3.1 Type-C SMD USB, DVI, HDMI Connector Adapters RoHS |
| Mfr. Part # | FG-ST-C-24P-CL03-14.3 | Package | SMD |
| Model Number | FG-ST-C-24P-CL03-14.3 |
This specification covers the requirements for product performance and test methods for USB C TYPE plug and receptacle connectors. Designed for reliable connectivity, these connectors are built to meet stringent industry standards and ensure optimal performance in various applications.
| Category | Item | Description | Test Method | Test Specification |
|---|---|---|---|---|
| General Requirements | Product Appearance | Outward appearance shall be good without injurious problems. Structure shall meet design and dimension requirements of drawing. | EIA364-18 | Visual inspection in accordance with each drawing. |
| Operating Conditions | Temperature Range: Storage: -20C to +60C; Operating: -30C to +80C; Nominal: +20C | N/A | N/A | |
| Mechanical Performance | Insertion Force | 5N - 20N | EIA 364-13 (Max rate: 12.5mm/min) | N/A |
| Extraction Force | 8N - 20N | EIA 364-13 (Max rate: 12.5mm/min) | N/A | |
| Durability | 5000 cycles (Type C) at a rate of 200 cycles/hour (manual). Post-test requirements: Contact resistance (40m max, delta 10m), Insertion force (5N-20N), Extraction force (8N-20N), Visual inspection (no exposed base metal on contacts). | EIA 364-09 | N/A | |
| Cable Flexing | 100 cycles in each of 2 planes, 120 degrees. Dimension x = 3.7 x cable diameter. No discontinuity over 1 microsecond. No physical damage allowed. | EIA 364-41 | N/A | |
| Cable Pull-Out | 40N steady state axial load for 1 minute. No discontinuity or physical damage allowed. 8N tensile force for 10 seconds (min) at 0, 90, 180, 270 directions. No discontinuity greater than 1s. | EIA-364-38 | N/A | |
| Electrical Performance | Insulation Resistance | 100m minimum (unmated) between adjacent contacts and contacts and shell. | EIA 364-21C (Apply 100V DC) | N/A |
| Low Level Contact Resistance | 40m (Max) initial for VBUS/GND, delta 10m (Max) after test. | EIA 364-23b (20mV Max. open circuit at 100mA Max.) | N/A | |
| Dielectric Withstanding Voltage | No breakdown. | EIA 364-20 (Apply 100VAC (RMS) for 1 minute) | N/A | |
| Current Rating | Contact Current Rating | 5.0A for VBUS pins, 1.25A for VCONN pin, 0.25A for other contacts. Temperature rise not to exceed 30C at an ambient temperature of 25C. | EIA364-70 | N/A |
| Environmental Performance | Temperature Life | 105C without applied voltage for 120 hours. (Preconditioning: 72 hours at 105C without voltage per EIA 364-1000.01). Post-test: Visual inspection, contact resistance (40m max). | EIA 364-17 | N/A |
| Thermal Shock | 10 Cycles: -55C to +85C. Mated connectors. No evidence of physical damage. | EIA 364-32 | N/A | |
| Cyclic Temperature and Humidity | 24 cycles: 25C3C at 80%3%RH and 65C3C at 50%3%RH. Ramp: 0.5 hour, Dwell: 1.0 hour. Test per EIA 364-1000.01. | EIA 364-31 | N/A | |
| Soldering | Solderability | Solder coverage minimum 95% of immersed surface. | EIA 364-52 (260C5C, 25.4mm6.35mm/sec for 5s immersion) | N/A |
| Material Compliance | RoHS Compliance | Pass (Lead, Mercury, Cadmium, Hexavalent chromium, PBBs, PBDEs, DEHP, BBP, DBP, DIBP) | IEC 62321 series | EU RoHS Directive (EU) 2015/863 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!